EN 302 326-2 : 1.2.2
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FIXED RADIO SYSTEMS; MULTIPOINT EQUIPMENT AND ANTENNAS; PART 2: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE FOR DIGITAL MULTIPOINT RADIO EQUIPMENT
Hardcopy , PDF
11-09-2021
English
Intellectual Property Rights
Foreword
0 Introduction
0.1 General
0.2 Relationship with the R&TTE essential requirements
1 Scope
1.1 General
1.2 Classification of equipment
1.3 Profiles
1.4 Frequency ranges
1.5 Access methods
1.6 Other relevant system characteristics
1.7 Bit rates
2 References
3 Definitions, symbols and abbreviations
3.1 Definitions
3.2 Symbols
3.3 Abbreviations
4 RF reference architecture
5 Technical requirements specifications
5.1 General
5.2 Environmental profile
5.3 Transmitting phenomena
5.4 Receiving phenomena
5.5 Special requirements for equipment with integral antennas
6 Testing for conformance with technical requirements
6.1 General
6.2 Environmental profile
6.3 Transmitting phenomena
6.4 Receiving phenomena
6.5 Special requirements for equipment with integral antennas
Annex A (normative): HS Requirements and conformance Test
specifications Table (HS-RTT)
Annex B (normative): Test report in relation to flexible
systems applications
B.1 Wide radio-frequency band covering units
specification and tests
B.2 Multirate/Multiformat covering equipment
specification and tests
Annex C (normative): System capacity
C.1 General
C.2 Capacity of equipment with EqC-PET = T, O or M
C.3 Capacity of equipment with EqC-PET = F
C.4 Capacity of equipment with EqC-PET = D
C.5 Capacity of equipment with EqC-PET = H
Annex D (informative): Spectrum mask requirements when ATPC
and/or RTPC are implemented
D.1 ATPC impact
D.2 RTPC Impact
Annex E (informative): Summary Table of EqC subject to
conformance declaration
Annex F (informative): The EN title in the official languages
Annex G (informative): Bibliography
History
Specifies the provisions of the R&TTE Directive regarding article 3.2, which states that '[...] radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference'.
Committee |
TM 04 2
|
DocumentType |
Standard
|
Pages |
63
|
PublisherName |
European Telecommunications Standards Institute
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NF EN 302326-2 : 2011 | Identical |
PN EN 302 326-2 : 2008 | Identical |
NEN EN 302326-2 : 2007 | Identical |
NBN EN 302 326-2 : 2007 | Identical |
DIN EN 302326-2:2007-12 | Identical |
ONORM EN 302326-2 : 1.2.2 | Identical |
TR 102 914 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ASPECTS AND IMPLICATIONS OF THE INCLUSION OF RECEIVER PARAMETERS WITHIN ETSI STANDARDS |
I.S. EN 301 489-4:2009 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES - PART 4: SPECIFIC CONDITIONS FOR FIXED RADIO LINKS, BROADBAND DATA TRANSMISSION SYSTEM BASE STATIONS, ANCILLARY EQUIPMENT AND SERVICES |
TR 103 103 : 1.1.1 | FIXED RADIO SYSTEMS; POINT-TO-POINT SYSTEMS; ATPC, RTPC, ADAPTIVE MODULATION (MIXED-MODE) AND BANDWIDTH ADAPTIVE FUNCTIONALITIES; TECHNICAL BACKGROUND AND IMPACT ON DEPLOYMENT, LINK DESIGN AND COORDINATION |
TR 102 565 : 1.1.1 | FIXED RADIO SYSTEMS (FRS); POINT-TO-POINT SYSTEMS; REQUIREMENTS AND BIT RATES OF PTP FIXED RADIO SYSTEMS WITH PACKET DATA INTERFACES, EFFECTS OF FLEXIBLE SYSTEM PARAMETERS, USE OF MIXED INTERFACES AND IMPLICATIONS ON IP/ATM NETWORKS |
EN 301 489-4 : 2.2.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 4: SPECIFIC CONDITIONS FOR FIXED RADIO LINKS AND ANCILLARY EQUIPMENT; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU |
TR 102 742 : 1.1.1 | BROADBAND RADIO ACCESS NETWORKS (BRAN); CONSIDERATION OF REQUIREMENTS FOR MOBILE TERMINAL STATION (TS) IN BROADBAND WIRELESS ACCESS SYSTEMS (BWA) IN THE 3400 MHZ TO 3800 MHZ FREQUENCY BAND |
EN 302 326-3 : 1.3.1 | FIXED RADIO SYSTEMS; MULTIPOINT EQUIPMENT AND ANTENNAS; PART 3: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE FOR MULTIPOINT RADIO ANTENNAS |
TR 102 453-1 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); CONVERGED FIXED-NOMADIC BROADBAND WIRELESS ACCESS (BWA); PART 1: FREQUENCIES ABOVE 3,4 GHZ - SYSTEM REFERENCE DOCUMENT |
EN 301 126-3-2 : 1.2.1 | FIXED RADIO SYSTEMS; CONFORMANCE TESTING; PART 3-2: POINT-TO-MULTIPOINT ANTENNAS - DEFINITIONS, GENERAL REQUIREMENTS AND TEST PROCEDURES |
EN 300 636 : 1.3.1 | TRANSMISSION AND MULTIPLEXING (TM); DIGITAL RADIO RELAY SYSTEMS (DRRS); TIME DIVISION MULTIPLE ACCESS (TDMA); POINT-TO-MULTIPOINT DRRS IN FREQUENCY BANDS IN THE RANGE 1 GHZ TO 3 GHZ |
EN 301 126-2-3 : 1.2.1 | FIXED RADIO SYSTEMS; CONFORMANCE TESTING; PART 2-3: POINT-TO-MULTIPOINT EQUIPMENT; TEST PROCEDURES FOR TDMA SYSTEMS |
1989/336/EEC : 1989 | COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY |
EN 301 126-2-4 : 1.1.1 | FIXED RADIO SYSTEMS; CONFORMANCE TESTING; PART 2-4: POINT-TO-MULTIPOINT EQUIPMENT; TEST PROCEDURES FOR FH-CDMA SYSTEMS |
EN 301 753 : 1.2.1 | FIXED RADIO SYSTEMS; MULTIPOINT EQUIPMENT AND ANTENNAS; GENERIC HARMONIZED STANDARD FOR MULTIPOINT DIGITAL FIXED RADIO SYSTEMS AND ANTENNAS COVERING THE ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.2 OF THE DIRECTIVE 1999/5/EC |
EN 301 126-2-6 : 1.1.1 | FIXED RADIO SYSTEMS; CONFORMANCE TESTING FOR POINT-TO-MULTIPOINT EQUIPMENT; PART 2-6: TEST PROCEDURES FOR MULTI CARRIER TIME DIVISION MULTIPLE ACCESS (MC-TDMA) SYSTEMS |
1973/23/EEC : 1973 | COUNCIL DIRECTIVE OF 19 FEBRUARY 1973 ON THE HARMONIZATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS |
EN 301 390 : 1.3.1 | FIXED RADIO SYSTEMS; POINT-TO-POINT AND MULTIPOINT SYSTEMS; UNWANTED EMISSIONS IN THE SPURIOUS DOMAIN AND RECEIVER IMMUNITY LIMITS AT EQUIPMENT/ANTENNA PORT OF DIGITAL FIXED RADIO SYSTEMS |
EN 301 055 : 1.4.1 | TRANSMISSION AND MULTIPLEXING TM - DIGITAL RADIO RELAY SYSTEMS (DRRS) - DIRECT SEQUENCE CODE DIVISION MULTIPLE ACCESS (DS-CDMA) - POINT-TO-MULTIPOINT DRRS IN FREQUENCY BANDS IN THE RANGE 1 GHZ TO 3 GHZ |
EG 201 399 : 3.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); A GUIDE TO THE PRODUCTION OF HARMONIZED STANDARDS FOR APPLICATION UNDER THE RADIO & TELECOMMUNICATION TERMINAL EQUIPMENT DIRECTIVE 1999/5/EC (R&TTE) AND A FIRST GUIDE ON THE IMPACT OF THE RADIO EQUIPMENT DIRECTIVE 2014/53/EU (RED) ON HARMONIZED STANDARDS |
EN 302 326-3 : 1.3.1 | FIXED RADIO SYSTEMS; MULTIPOINT EQUIPMENT AND ANTENNAS; PART 3: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE FOR MULTIPOINT RADIO ANTENNAS |
EN 302 326-1 : 1.2.2 | FIXED RADIO SYSTEMS; MULTIPOINT EQUIPMENT AND ANTENNAS; PART 1: OVERVIEW AND REQUIREMENTS FOR DIGITAL MULTIPOINT RADIO SYSTEMS |
TR 101 506 : 1.3.1 | FIXED RADIO SYSTEMS; GENERIC DEFINITIONS, TERMINOLOGY AND APPLICABILITY OF ESSENTIAL REQUIREMENTS COVERING ARTICLE 3.2 OF DIRECTIVE 2014/53/EU TO FIXED RADIO SYSTEMS |
EN 301 126-2-2 : 1.1.1 | FIXED RADIO SYSTEMS; CONFORMANCE TESTING; PART 2-2: POINT-TO-MULTIPOINT EQUIPMENT; TEST PROCEDURES FOR FDMA SYSTEMS |
EN 301 126-2-5 : 1.1.1 | FIXED RADIO SYSTEMS; CONFORMANCE TESTING; PART 2-5: POINT-TO-MULTIPOINT EQUIPMENT; TEST PROCEDURES FOR DS-CDMA SYSTEMS |
119999/5/EC : 1999 | DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 1999 ON RADIO EQUIPMENT AND TELECOMMUNICATIONS TERMINAL EQUIPMENT AND THE MUTUAL RECOGNITION OF THEIR CONFORMITY |
EN 301 489-4 : 2.2.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 4: SPECIFIC CONDITIONS FOR FIXED RADIO LINKS AND ANCILLARY EQUIPMENT; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU |
EN 301 489-1 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 1: COMMON TECHNICAL REQUIREMENTS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU AND THE ESSENTIAL REQUIREMENTS OF ARTICLE 6 OF DIRECTIVE 2014/30/EU |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.