EN 3475-601:2007
Current
Current
The latest, up-to-date edition.
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density
Published date
29-08-2007
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Terms and definitions
3 Principle of method
4 Test apparatus
5 Test specimens
6 Conditioning
7 Check and maintenance of the test apparatus
8 Test performance
9 Calculation
10 Requirements
11 Report
This test method is intended for determination of the specific optical density of smoke generated by electrical wire/cable insulation materials due to pyrolitic decomposition under the influence of radiant heat only or with simultaneous flame application.It is used for evaluation of insulation materials of electrical wire/cable used in the interiors of aerospace vehicles but may be utilized in other applications as specified in applicable procurement documents.This standard should be used to measure and describe the properties of products in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 3475-601. (11/2007)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS EN 3475-601:2007 | Identical |
| NEN EN 3475-601 : 2007 | Identical |
| UNE-EN 3475-601:2007 | Identical |
| NS EN 3475-601 : 1ED 2007 | Identical |
| NF EN 3475-601 : 2008 | Identical |
| UNI EN 3475-601 : 2010 | Identical |
| NBN EN 3475-601 : 2008 | Identical |
| DIN EN 3475-601:2008-11 | Identical |
| I.S. EN 3475-601:2007 | Identical |
| SN EN 3475-601 : 2008 | Identical |
| 09/30202409 DC : 0 | BS EN 4681-001 - AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION |
| BS EN 4611-009:2012 | Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family BJ. Nickel plated copper. Operating temperatures, between -65°C and 150°C. Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination. UV laser printable. Product standard |
| 09/30204366 DC : 0 | BS EN 4604-009 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 009: CABLE, COAXIAL, LIGHT WEIGHT, 50 OHMS, 180 DEGREE C, TYPE KW (LIGHT WN) - PRODUCT STANDARD |
| 12/30273364 DC : 0 | BS EN 2713-012 - AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 012: SILVER PLATED COPPER SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| UNI EN 4608-005 : 2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY - LIGHTWEIGHT TWO-CORE GAUGE 24 FOR DATA TRANSMISSION - UV LASER PRINTABLE - PRODUCT STANDARD |
| 09/30202414 DC : 0 | BS EN 4682-003 - AEROSPACE SERIES - CABLES, ELECTRIC, SCREENED AND JACKETED, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 003: AD FAMILY, SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| 14/30314178 DC : 0 | BS EN 2714-014 - AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 014: DR FAMILY, 4 TO 11 CORES, TAPED, SCREENED (BRAIDED) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| 09/30209903 DC : 0 | BS EN 2714-015 - AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREE C AND 260 DEGREE C - PART 015: XX FAMILY, SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| 15/30322427 DC : 0 | BS EN 6049-003 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 003: BRAIDED, TUBULAR, EXPANDABLE - PRODUCT STANDARD |
| BS EN 2714-009:2007 | Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55 °C and 260 °C Screened (spiral) and jacketed, YAG X3 laser printable. Product standard |
| BS EN 2267-011:2015 | Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 °C and 260 °C DZA family, single and multicore assembly for use in low pressure atmosphere. Product standard |
| I.S. EN 2714-009:2007 | AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 009: SCREENED (SPIRAL) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD |
| PREN 2267-012 : DRAFT 2014 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 012: DZ FAMILY, SINGLE UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| BS EN 4604-003:2009 | Aerospace series. Cable, electrical, for signal transmission Cable, coaxial, 50 ohm, 200 °C, type WZ. Product standard |
| PREN 4641-301 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 301: TIGHT STRUCTURE 50/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 3375-009 : 200P2 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 009: SINGLE BRAID - CAN BUS - 120 OHMS - TYPE WX - PRODUCT STANDARD |
| PREN 2714-014 : 200P3 | AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 014: DR FAMILY, 4 TO 11 CORES, TAPED, SCREENED (BRAIDED) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| PREN 4641-202 : DRAFT 2017 | AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 202: SEMI-LOOSE, RUGGEDIZED SIMPLEX CONSTRUCTION 9/125 [MU]M SM FIBRE NOMINAL 2,74 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| I.S. EN 4611-003:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 4611-004:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 6049-003:2009 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 003: BRAIDED, TUBULAR, EXPANDABLE - PRODUCT STANDARD |
| BS EN 4604-006:2009 | Aerospace series. Cable, electrical, for signal transmission Cable, coaxial, 50 ohm, 200 °C, type WM. Product standard |
| NF EN 4641-301 : 2011 | AEROSPACE SERIES - CABLES, OPTICAL 125 MM DIAMETER CLADDING - PART 301: TIGHT STRUCTURE 50/125 MM GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| UNI EN 4611-006 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 006: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| BS EN 4604-007:2007 | Aerospace series. Cable, electrical, for signal transmission Cable, coaxial 50 Ohms, 200°C, type WN. Product standard |
| I.S. EN 4604-007:2007 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 007: CABLE, COAXIAL 50 OHMS, 200 DEGREE C, TYPE WN - PRODUCT STANDARD |
| BS EN 3375-001:2007 | Aerospace series. Cable, electrical, for digital data transmission Technical specification |
| NF EN 4604-006 : 2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 006: CABLE, COAXIAL, 50 OHM, 200 DEGREES C, TYPE WM - PRODUCT STANDARD |
| BS EN 3375-005:2007 | Aerospace series. Cable, electrical, for digital data transmission Double braid + metallic layer. 77 Ohms. Type WV. Product standard |
| BS EN 3475-602:2007 | Aerospace series. Cables, electrical, aircraft use. Test methods Toxicity |
| BS EN 3375-006:2006 | Aerospace series. Cable, electrical, for digital data transmission Single braid. 78 Ohms. Type XM. Product standard |
| 09/30202402 DC : 0 | BS EN 4681-003 - AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 003: AD FAMILY, SINGLE, UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 4604-003:2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 003: CABLE, COAXIAL, 50 OHM, 200 DEGREES C, TYPE WZ - PRODUCT STANDARD |
| 10/30228109 DC : 0 | BS EN 4608-004 - AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN - 65 DEGREE C AND 260 DEGREE C PART 004: DW FAMILY - LIGHTWEIGHT - UV LASER PRINTABLE - PRODUCT STANDARD |
| 14/30314191 DC : 0 | BS EN 3375-009 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 009: SINGLE BRAID - CAN BUS - 120 OHMS - TYPE WX - PRODUCT STANDARD |
| BS EN 2854-003:2009 | Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm<sup>2</sup>. Operating temperatures between -55 °C and 260 °C Product standard |
| I.S. EN 2266-008:2015 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 008: DRP (PAIR) DRT (3 CORES) DRQ (4 CORES) FAMILY, MULTICORE UV LASER PRINTABLE JACKETED CABLE - PRODUCT STANDARD |
| 11/30242768 DC : 0 | BS EN 2267-010 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 010: DR FAMILY, SINGLE UV LASER PRINTABLE - PRODUCT STANDARD |
| NF EN 4641-103 : 2011 | AEROSPACE SERIES - CABLES, OPTICAL 125 MM DIAMETER CLADDING - PART 103: SEMI-LOOSE, RUGGEDIZED SIMPLEX CONSTRUCTION 62,5/125 MM GI FIBRE NOMINAL 2,74 MM, OUTSIDE DIAMETER - PRODUCT STANDARD |
| I.S. EN 4604-008:2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 008: CABLE, COAXIAL, 50 OHMS, 200 DEGREES C, TYPE WD - PRODUCT STANDARD |
| PREN 4682-001 : DRAFT 2009 | AEROSPACE SERIES - CABLES, ELECTRIC, SCREENED AND JACKETED, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION |
| PREN 4641-201 : DRAFT 2017 | AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 201: SEMI-LOOSE STRUCTURE 9/125 [MU]M SM FIBER NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| NF EN 4604-003 : 2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 003: CABLE, COAXIAL, 50 OHMS, 200 DEGREES C, TYPE WZ - PRODUCT STANDARD |
| PREN 4641-102 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| I.S. EN 4611-006:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 006: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| BS EN 4681-006:2015 | Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium AZA family, single and multicore assembly, for use in low pressure atmosphere. Product standard |
| UNI EN 4611-003 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| BS EN 4604-008:2009 | Aerospace series. Cable, electrical, for signal transmission Cable, coaxial, 50 ohms, 200 °C., Type WD. Product standard |
| BS EN 2267-012:2015 | Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°C DZ family, single UV laser printable for use in low pressure atmosphere. Product standard |
| 09/30202412 DC : 0 | BS EN 4682-001 - AEROSPACE SERIES - CABLES, ELECTRIC, SCREENED AND JACKETED, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION |
| 11/30242754 DC : 0 | BS EN 2267-009 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 009: DRA FAMILY, SINGLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD |
| NF EN 3375-008 : 2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 008: SINGLE BRAID - STAR QUAD 100 OHMS - TYPE KD - PRODUCT STANDARD |
| 09/30209902 DC : 0 | BS EN 2267-011 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 011: XXA FAMILY, SINGLE AND MULTICORE ASSEMBLY FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| 05/19983861 DC : DRAFT MAY 2005 | BS EN 3475-602 - AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 602: TOXICITY |
| BS EN 4641-102:2009 | Aerospace series. Cables, optical 125 μm outside diameter cladding Semi-loose 62,5/125 μm GI fibre nominal 1,8 mm outside diameter. Product standard |
| I.S. EN 4641-102:2009 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M OUTSIDE DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| I.S. EN 4604-006:2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 006: CABLE, COAXIAL, 50 OHM, 200 DEGREES C, TYPE WM - PRODUCT STANDARD |
| BS EN 4611-003:2012 | Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Tin plated copper. Operating temperatures, between -65 °C and 135 °C. Single extruded wall for enclosed applications. UV laser printable. Product standard |
| BS EN 4608-003:2012 | Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65 °C and 260 °C DN family. Lightweight. UV Laser printable. Product standard |
| 09/30204372 DC : 0 | BS EN 4604-010 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 010: CABLE, COAXIAL, LIGHT WEIGHT, 50 OHMS, 200 DEGREE C, TYPE KX (LIGHT WD) - PRODUCT STANDARD |
| PREN 4604-001 : 200P4 | AEROSPACE SERIES CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 001: TECHNICAL SPECIFICATION |
| PREN 4681-004 : DRAFT 2009 | AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 004: ADA FAMILY, SINGLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD |
| BS EN 6049-003:2009 | Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres Braided, tubular, expandable. Product standard |
| I.S. EN 4611-009:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 009: BJ - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR USE AS CABLE CORES OR WITHIN EQUIPMENT IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 4611-005:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 4611-008:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 008: BP - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS WITH ADDITIONAL PROTECTION IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD |
| EN 6049-003:2009 | Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 003: Braided, tubular, expandable - Product standard |
| I.S. EN 2267-012:2015 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 012: DZ FAMILY, SINGLE UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| I.S. EN 4611-007:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| UNI EN 4611-005 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES AND 150 DEGREES - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| UNI EN 4611-007 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| NF EN 6049-003 : 2010 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 003: BRAIDED, TUBULAR, EXPANDABLE - PRODUCT STANDARD |
| UNI EN 4641-301 : 2012 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 301: TIGHT STRUCTURE 50/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| BS EN 3375-003:2007 | Aerospace series. Cable, electrical, for digital data transmission Single braid. 77 Ohms. Type KG. Product standard |
| EN 4611-003:2012 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 003: Tin plated copper - Operating temperatures, between -65 °C and 135 °C - Single extruded wall for enclosed applications - UV laser printable - Product standard |
| EN 4611-004:2012 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between –65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard |
| EN 4604-003:2009 | Aerospace series - Cable, electrical, for signal transmission - Part 003: Cable, coaxial, 50 ohm, 200 °C, type WZ - Product standard |
| EN 2266-008:2015 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 008: DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable - Product standard |
| EN 2714-010:2006 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: Screened (braided) and jacketed, YAG X3 laser printable - Product standard |
| EN 2266-003:2005 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 003: Ink jet printable - Product standard |
| PREN 4641-106 : DRAFT 2017 | AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 106: SEMI-LOOSE STRUCTURE 62,5/125 [MU]M GI FIBRE NOMINAL 0,9 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| I.S. EN 3375-008:2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 008: SINGLE BRAID - STAR QUAD 100 OHMS - TYPE KD - PRODUCT STANDARD |
| BS EN 4611-008:2012 | Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family BP. Nickel plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination. UV laser printable. Product standard |
| BS EN 4641-301:2011 | Aerospace series. Cables, optical 125 μm diameter cladding Tight structure 50/125 μm GI fibre nominal 1,8 mm outside diameter. Product standard |
| NF EN 2714-009 : A2009 | AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 009: SCREENED (SPIRAL) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD |
| BS EN 4611-007:2012 | Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Nickel plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications. UV laser printable. Product standard |
| 14/30300813 DC : 0 | BS EN 4681-001 - AEROSPACE SERIES CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION |
| UNI EN 4611-009 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 009: BJ - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR USE AS CABLE CORES OR WITHIN EQUIPMENT IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD |
| BS EN 2266-008:2015 | Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°C DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable. Product standard |
| I.S. EN 4608-003:2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 003: DN FAMILY - LIGHTWEIGHT - UV LASER PRINTABLE - PRODUCT STANDARD |
| BS EN 4641-103:2010 | Aerospace series. Cables, optical 125 μm diameter cladding Semi-loose, ruggedized simplex construction 62,5/125 μm GI fibre nominal 2,74 mm, outside diameter. Product standard |
| BS EN 4611-006:2012 | Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Silver plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications. UV laser printable. Product standard |
| UNI EN 4611-004 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD |
| EN 4611-005:2012 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 005: Silver plated copper — Operating temperatures, between –65 °C and 150 °C - Single extruded wall for enclosed applications - UV laser printable - Product standard |
| 09/30209901 DC : 0 | BS EN 2267-012 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 012: XX FAMILY, SINGLE UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| UNI EN 4641-103 : 2012 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 103: SEMI-LOOSE, RUGGEDIZED SIMPLEX CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL 2,74 MM, OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 2267-011 : DRAFT 2014 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 011: DZA FAMILY, SINGLE AND MULTICORE ASSEMBLY FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| PREN 2266-008 : DRAFT 2014 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 008: DRP (PAIR) DRT (3 CORES) DRQ (4 CORES) FAMILY, MULTICORE UV LASER PRINTABLE JACKETED CABLE - PRODUCT STANDARD |
| PREN 4641-200 : DRAFT 2017 | AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 200: SEMI-LOOSE STRUCTURE 9/125 [MU]M GI FIBRE NOMINAL 0,9 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| NF EN 2854-003 : 2009 | AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: PRODUCT STANDARD |
| PREN 4641-103 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 103: SEMI-LOOSE, RUGGEDIZED SIMPLEX CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL 2,74 MM, OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 3375-008 : 200P1 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 008: SINGLE BRAID - STAR QUAD 100 OHMS - TYPE KD - PRODUCT STANDARD |
| PREN 4604-008 : DRAFT 2008 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 008: CABLE, COAXIAL, 50 OHMS, 200 DEGREES C, TYPE WD - PRODUCT STANDARD |
| PREN 4681-003 : DRAFT 2009 | AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 003: AD FAMILY, SINGLE, UV LASER PRINTABLE - PRODUCT STANDARD |
| PREN 3375-007 : 200P2 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 007: DOUBLE BRAID - 77 OHMS - TYPE WW - PRODUCT STANDARD |
| I.S. EN 4608-005:2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY - LIGHTWEIGHT TWO-CORE GAUGE 24 FOR DATA TRANSMISSION - UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 2854-003:2009 | AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: PRODUCT STANDARD |
| EN 4604-001:2009 | Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification |
| I.S. EN 2267-011:2015 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 011: DZA FAMILY, SINGLE AND MULTICORE ASSEMBLY FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| BS EN 3745-601:2007 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Smoke density |
| EN 4604-006:2009 | Aerospace series - Cable, electrical, for signal transmission - Part 006: Cable, coaxial, 50 ohm, 200 °C, type WM - Product standard |
| BS EN 3375-004:2007 | Aerospace series. Cable, electrical, for digital data transmission Double braid. 77 Ohms. Type WJ. Product standard |
| EN 2713-004:2006 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard |
| EN 3375-008:2009 | Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 ohms - Type KD - Product standard |
| EN 3745-601:2007 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density |
| EN 2267-012:2015 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standard |
| EN 4611-008:2012 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 008: BP - Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard |
| EN 4604-004:2007 | Aerospace series - Cable, electrical, for signal transmission - Part 004: Cable, microcoaxial, high immunity, 50 Ohms, 200 °C, type WS - Product standard |
| EN 4608-005:2012 | Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between -65 °C and 260 °C - Part 005: DW family - Lightweight two-core gauge 24 for data transmission - UV laser printable - Product standard |
| EN 4604-008:2009 | Aerospace series - Cable, electrical, for signal transmission - Part 008: Cable, coaxial, 50 ohms, 200°C., Type WD - Product standard |
| EN 3375-006:2006 | Aerospace series - Cable, electrical, for digital data transmission - Part 006: Single braid - 78 Ohms - Type XM - Product standard |
| EN 2714-008:2006 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard |
| EN 4641-102:2009 | Aerospace series - Cables, optical 125 μm outside diameter cladding - Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard |
| EN 3375-005:2007 | Aerospace series - Cable, electrical, for digital data transmission - Part 005: Double braid + metallic layer - 77 Ohms - Type WV - Product standard |
| EN 4608-003:2012 | Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between -65 °C and 260 °C - Part 003: DN family - Lightweight - UV Laser printable - Product standard |
| EN 2713-008:2006 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard |
| EN 3375-003:2007 | Aerospace series - Cable, electrical, for digital data transmission - Part 003: Single braid - 77 Ohms - Type KG - Product standard |
| EN 2713-006:2006 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 006: Screened (braided) and jacketed, CO2 laser printable - Product standard |
| EN 3375-004:2007 | Aerospace series - Cable, electrical, for digital data transmission - Part 004: Double braid - 77 Ohms - Type WJ - Product standard |
| EN 2714-009:2007 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard |
| EN 4641-103:2010 | Aerospace series - Cables, optical 125 μm diameter cladding - Part 103: Semi-loose, ruggedized simplex construction 62,5/125 μm GI fibre nominal 2,74 mm, outside diameter - Product standard |
| EN 4641-301:2011 | Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard |
| EN 2267-011:2015 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 011: DZA family, single and multicore assembly for use in low pressure atmosphere - Product standard |
| EN 2714-006:2006 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 006: Screened (braided) and jacketed, CO2 laser printable - Product standard |
| EN 4681-006:2015 | Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 006: AZA family, single and multicore assembly, for use in low pressure atmosphere - Product standard |
| EN 2713-010:2006 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 010: Screened (braided) and jacketed, YAG X3 laser printable - Product standard |
| EN 4611-009:2012 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 009: BJ - Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard |
| EN 3475-602:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity |
| EN 2714-004:2006 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard |
| 14/30314190 DC : 0 | BS EN 3375-007 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 007: DOUBLE BRAID - 77 OHMS - TYPE WW - PRODUCT STANDARD |
| EN 3375-001:2007 | Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification |
| BS EN 4608-005:2012 | Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65 °C and 260 °C DW family. Lightweight two-core gauge 24 for data transmission. UV laser printable. Product standard |
| BS EN 4611-004:2012 | Aerospace series. Cables, electrical, for general purpose,single and multicore assembly. XLETFE Family Tin plated copper. Operating temperatures, between -65 °C and 135 °C. Dual extruded wall for open applications. UV laser printable. Product standard |
| BS EN 3375-008:2009 | Aerospace series. Cable, electrical, for digital data transmission Single braid. Star Quad 100 Ohms. Type KD. Product standard |
| 09/30202389 DC : 0 | BS EN 4681-004 - AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 004: ADA FAMILY, SINGLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD |
| EN 2854-003:2009 | Aerospace series - Cables, electrical for general purpose - Cross sections equal to and greater than 9 mm² - Operating temperatures between – 55 °C and 260 °C - Part 003: Product standard |
| I.S. EN 4604-001:2009 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 001: TECHNICAL SPECIFICATION |
| PREN 4682-003 : DRAFT 2009 | AEROSPACE SERIES - CABLES, ELECTRIC, SCREENED AND JACKETED, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 003: AD FAMILY, SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| UNI EN 4611-008 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 008: BP - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS WITH ADDITIONAL PROTECTION IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD |
| PREN 6049-004 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - BRAIDED, TUBULAR, HIGH EXPANDABLE - PRODUCT STANDARD |
| I.S. EN 4681-006:2015 | AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 006: AZA FAMILY, SINGLE AND MULTICORE ASSEMBLY, FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| I.S. EN 3375-001:2007 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 001: TECHNICAL SPECIFICATION |
| NF EN 3375-001 : 2008 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 4641-103:2010 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 103: SEMI-LOOSE, RUGGEDIZED SIMPLEX CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL 2,74 MM, OUTSIDE DIAMETER - PRODUCT STANDARD |
| EN 4611-007:2012 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 007: Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard |
| I.S. EN 4641-301:2011 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 301: TIGHT STRUCTURE 50/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| EN 4611-006:2012 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 006: Silver plated copper - Operating temperatures, between –65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard |
| EN 4604-007:2007 | Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial 50 Ω, 200 °C, type WN - Product standard |
| BS EN 4611-005:2012 | Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Silver plated copper. Operating temperatures, between -65 °C and 150 °C. Single extruded wall for enclosed applications. UV laser printable. Product standard |
| NF EN 4608-001 : 2006 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
| BS EN 4604-001:2009 | Aerospace series. Cable, electrical, for signal transmission Technical specification |
| BS EN 4604-004:2007 | Aerospace series. Cable, electrical, for signal transmission Cable, microcoaxial, high immunity, 50 Ohms, 200°C, type WS. Product standard |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.