EN 4050-3:2012
Current
The latest, up-to-date edition.
Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks
26-09-2012
Foreword
1 Scope
2 Generality
3 Normative references
4 Terms and definitions
5 Master test blocks
6 Standard test blocks
7 Special test blocks for round bars
and forging stock
Annex A (normative) - Standard test blocks
This European Standard specifies the requirements for the manufacture, checking and marking of the series of ultrasonic testing reference blocks containing flat bottom holes (FBH) which define the indicated defect size to which reference is made in EN standards.The application of ultrasonic testing reference blocks containing side drilled holes (SDH) which define an indicated defect size shall be agreed between manufacturer and purchaser.This standard is applicable to the production of master and standard test blocks to be used when carrying out ultrasonic inspection to the requirements of EN 4050 1 (FBH method).It is recognized that particular difficulties are encountered with round forging stock and bars due to the wide range of curvatures. For this application, only one block shall be produced to act as both master and standard test block.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 4050-3. (10/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 4050-3 : 2013 | Identical |
| NBN EN 4050-3 : 2012 | Identical |
| NEN EN 4050-3 : 2012 | Identical |
| NS EN 4050-3 : 2012 | Identical |
| I.S. EN 4050-3:2012 | Identical |
| PN EN 4050-3 : 2013 | Identical |
| SN EN 4050-3 : 2013 | Identical |
| UNI EN 4050-3 : 2013 | Identical |
| UNE-EN 4050-3:2012 | Identical |
| BS EN 4050-3:2012 | Identical |
| DIN EN 4050-3:2012-12 | Identical |
| BS EN 4050-1:2012 | Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings General requirements |
| 14/30301152 DC : 0 | BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| PREN 12392 : DRAFT 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| UNI EN 4050-1 : 2013 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 1: GENERAL REQUIREMENTS |
| EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| I.S. EN 12392:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| DIN EN 12392:2016-08 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| 04/30050376 DC : DRAFT AUG 2004 | EN 13981-4 - ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 4: FORGINGS |
| I.S. EN 4050-1:2012 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 1: GENERAL REQUIREMENTS |
| BS EN 12392:2016 | Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment |
| EN 4050-1:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements |
| ASTM E 127 : 2015 : REDLINE | Standard Practice for Fabrication and Control of Aluminum Alloy Ultrasonic Standard Reference Blocks |
| EN 4050-4:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria |
| EN 4050-1:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements |
| PREN 2278 : 1 | AEROSPACE SERIES - STEEL X12CRNIMOV12-3 (1.4933) - 900 MPA <= R[M] <= 1100 MPA - BARS - D[E] <= 150 MM |
| PREN 2321 : 1 | AEROSPACE SERIES - ALUMINIUM ALLOY 2024-T3 - BARS AND SECTIONS A <= 150 MM |
| PREN 3311 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 - ANNEALED - BAR FOR MACHINING - D <= 150 MM |
| EN 4050-2:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.