EN 4050-4:2012
Current
Current
The latest, up-to-date edition.
AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 4: ACCEPTANCE CRITERIA
Published date
26-09-2012
Publisher
Foreword
1 Scope
2 Normative references
3 Acceptance criteria
4 Choice of technique
This European Standard specifies the acceptance criteria for products ultrasonically inspected in accordance with EN 4050 1.
DevelopmentNote |
Supersedes PREN 4050-4. (10/2012)
|
DocumentType |
Test Method
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NBN EN 4050-4 : 2012 | Identical |
I.S. EN 4050-4:2012 | Identical |
SN EN 4050-4 : 2013 | Identical |
UNE-EN 4050-4:2012 | Identical |
PN EN 4050-4 : 2013 | Identical |
UNI EN 4050-4 : 2013 | Identical |
NF EN 4050-4 : 2013 | Identical |
BS EN 4050-4:2012 | Identical |
DIN EN 4050-4:2012-12 | Identical |
NEN EN 4050-4 : 2012 | Identical |
NS EN 4050-4 : 2012 | Identical |
BS EN 4050-1:2012 | Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings General requirements |
05/30129558 DC : 0 | PREN 4700-7 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK |
BS EN 2704:2015 | Aerospace series. Aluminium alloy AL-P2024. AlCu4Mg1. T3511. Drawn bars. De ≤ 75 mm |
BS EN 4725:2014 | Aerospace series. Aluminium alloy AL-P2024- Al Cu4Mg1. T351. Plate. 6 mm < a ≤ 150 mm |
05/30129551 DC : 0 | PREN 4700-5 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
14/30301152 DC : 0 | BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
BS EN 4631:2013 | Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1 050 MPa |
PREN 12392 : DRAFT 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
I.S. EN 4725:2014 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024- AL CU4MG1 - T351 - PLATE - 6 MM < A <= 150 MM |
I.S. EN 4050-3:2012 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 3: REFERENCE BLOCKS |
I.S. EN 4720:2014 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
PREN 4721 : DRAFT 2012 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <=200 MM - 900 MPA <= R[M] <= 1050 MPA |
PREN 4630 : 200P2 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
PREN 4720 : DRAFT 2012 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
UNI EN 2252 : 2013 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - 1080 MPA <= R[M] <= 1250 MPA - FORGINGS - D[E] <= 100 MM |
UNI EN 4050-1 : 2013 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 1: GENERAL REQUIREMENTS |
I.S. EN 3528:2013 | AEROSPACE SERIES - STEEL X2NICOMO18-8-5 (1.6359) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA |
BS EN 2633:2015 | Aerospace series. Aluminium alloy AL-P2024. AlCu4Mg1. T3511. Extruded bars and sections. 1,2 mm ≤ De ≤ 160 mm with peripheral coarse grain control |
I.S. EN 2633:2015 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - ALCU4MG1 - T3511 - EXTRUDED BARS AND SECTIONS - 1,2 MM <= D[E] <= 160 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
UNI EN 2213 : 2013 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - BARS - D[E] <= 16 MM - 980 MPA <= R[M] <= 1180 MPA |
I.S. EN 2030:2013 | AEROSPACE SERIES - STEEL X105CRMO17 (1.3544) - HARDENED AND TEMPERED - BARS - D[E] <= 150 MM |
BS EN 4050-3:2012 | Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings Reference blocks |
09/30207942 DC : 0 | BS EN 2252 - AEROSPACE SERIES - STEEL FE-PL2108 (36NICRMO16) - 1100 MPA <= R[M] <= 1300 MPA - FORGINGS - D[E] <= 100 MM |
EN 4700-002:2016 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
UNI EN 4631 : 2013 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
16/30337543 DC : 0 | BS EN 8.4577 - AEROSPACE SERIES - X5CRNICU15-5 (1.4545) - CONSUMABLE ELECTRODE REMELTED (ESR OR VAR) - SOLUTION TREATED AND PRECIPITATION TREATED (H1025) - BAR FOR MACHINING - A OR D <= 250 MM - 1070 MPA <= R[M] <= 1200 MPA - PREMIUM QUALITY (PQ) |
97/718304 DC : DRAFT OCT 1997 | PREN 2816 - AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - CONSUMABLE ELECTRODE REMELTED SOLUTION TREATED AND PRECIPATION HARDENED - FORGINGS A OR D <= 200 MM - RM => 965 MPA |
PREN 4725 : DRAFT 2013 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024- AL CU4MG1 - T351 - PLATE - 6 MM < A <= 150 MM |
I.S. EN 4629:2013 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - SOFTENED - FORGING STOCK - D[E] <= 300 MM |
I.S. EN 12392:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
BS EN 2252:2012 | Aerospace series. Steel FE-PL1505 (15CrMoV6). 1 080 MPa ≤ Rm ≤ 1 250 MPa. Forgings. De ≤ 100 mm |
UNI EN 4050-3 : 2013 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 3: REFERENCE BLOCKS |
UNI EN 2030 : 2014 | AEROSPACE SERIES - STEEL X105CRMO17 (1.3544) - HARDENED AND TEMPERED - BARS - D[E] <= 150 MM |
BS EN 4050-2:2012 | Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings Performance of test |
I.S. EN 2704:2015 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - ALCU4MG1 - T3511 - DRAWN BAR - D[E] <= 75 MM |
11/30248021 DC : 0 | AEROSPACE SERIES - COPPER ALLOY CUBE 1.9 - SOLUTION TREATED, COLD WORKED TO [1/2] HARD AND PRECIPITATION TREATED - BAR - 5 MM <= A OR D <= 190 MM - R[M] >= 1220 MPA |
BS EN 4721:2014 | Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted and electroslag remelted (ESR). Hardened and tempered. Bar. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1 050 MPa |
11/30248022 DC : 0 | AEROSPACE SERIES - COPPER ALLOY CUBE 1.9 - SHEET AND STRIP |
BS EN 4700-002:2016 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
BS EN 4720:2014 | Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted and electroslag remelted (ESR). Hardened and tempered. Bar. De ≤ 200 mm. 1 150 MPa ≤ Rm ≤ 1 300 MPa |
BS EN 4628:2013 | Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De ≤ 200 mm. 1 150 MPa ≤ Rm ≤ 1 300 MPa |
BS EN 4630:2014 | Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1 050 MPa |
I.S. EN 4627:2014 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
DIN EN 12392:2016-08 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
EN 2252:2012 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - 1 080 MPa ≤ Rm ≤ 1 250 MPa - Forgings - De ≤ 100 mm |
96/716568 DC : 0 | PREN 4400-2 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 2: PLATE |
UNI EN 3464 : 2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - PLATE - 6 MM < A <= 100 MM |
BS EN 3528:2013 | Aerospace series. Steel X2NiCoMo18-8-5 (1.6359). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. 1 750 MPa ≤ Rm ≤ 2 000 MPa |
02/708860 DC : 0 | PREN 4800-1 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 1: PLATE, SHEET AND STRIP |
I.S. EN 4700-002:2016 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
BS EN 4627:2014 | Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De ≤ 200 mm. 1 150 MPa ≤ Rm ≤ 1 300 MPa |
DIN EN 2633:2016-02 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - ALCU4MG1 - T3511 - EXTRUDED BARS AND SECTIONS - 1,2 MM <= D[E] <= 160 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
BS EN 2030:2013 | Aerospace series. Steel X105CrMo17 (1.3544). Hardened and tempered. Bars. De ≤ 150 mm |
11/30253929 DC : 0 | BS EN 4820 - AEROSPACE SERIES - COPPER AND COPPER ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION |
04/30050376 DC : DRAFT AUG 2004 | EN 13981-4 - ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 4: FORGINGS |
03/306585 DC : 0 | EN 4400-7 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 7: ALUMINIUM ALLOY FORGINGS |
UNI EN 4627 : 2014 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
05/30129555 DC : 0 | PREN 4700-6 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
DIN EN 2704:2016-02 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - ALCU4MG1 - T3511 - DRAWN BARS - D[E] <= 75 MM |
I.S. EN 4050-1:2012 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 1: GENERAL REQUIREMENTS |
UNI EN 4050-2 : 2013 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 2: PERFORMANCE OF TEST |
BS EN 12392:2016 | Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment |
EN 4721 : 2014 | Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa |
EN 4631:2013 | Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bar - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa |
EN 4725:2014 | Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T351 - Plate - 6 mm < a ≤ 150 mm |
EN 2030:2013 | Aerospace series - Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De ≤ 150 mm |
EN 3528 : 2013 | AEROSPACE SERIES - STEEL X2NICOMO18-8-5 (1.6359) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA |
EN 4050-1 : 2012 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 1: GENERAL REQUIREMENTS |
EN 4629:2013 | Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Softened - Forging stock - De ≤ 300 mm |
EN 4627:2014 | Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa |
EN 4630:2014 | Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa |
EN 4628:2013 | Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bar - De ≤ 200 mm — 1 150 MPa ≤ Rm ≤ 1 300 MPa |
EN 2704:2015 | Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Drawn bars - De ≤ 75 mm |
EN 2633:2015 | Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Extruded bars and sections - 1,2 mm ≤ De ≤ 160 mm with peripheral coarse grain control |
EN 4050-3 : 2012 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 3: REFERENCE BLOCKS |
EN 4050-2 : 2012 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 2: PERFORMANCE OF TEST |
EN 4720:2014 | Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa |
I.S. EN 4630:2014 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
I.S. EN 4721:2014 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
I.S. EN 4050-2:2012 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 2: PERFORMANCE OF TEST |
UNI EN 4629 : 2013 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - SOFTENED - FORGING STOCK - D[E] <= 300 MM |
UNI EN 4628 : 2013 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
BS EN 4629:2013 | Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Softened. Forging stock. De ≤ 300 mm |
PREN 4842 : DRAFT 2016 | AEROSPACE SERIES - X5CRNICU15-5 (1.4545) CONSUMABLE ELECTRODE REMELTED (ESR OR VAR) - SOLUTION TREATED AND PRECIPITATION TREATED (H1025) BAR FOR MACHINING A OR D <= 250 MM 1070 MPA <= R[M] <= 1200 MPA PREMIUM QUALITY (PQ) |
PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
PREN 4627 : 200P2 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
I.S. EN 4628:2013 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
I.S. EN 4631:2013 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
I.S. EN 3813:2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - BAR AND WIRE FOR FORGED FASTENERS - D[E] <= 50 MM |
EN 4050-1 : 2012 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 1: GENERAL REQUIREMENTS |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.