• There are no items in your cart

PREN 4700-002 : 200P3

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by

AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION

Available format(s)

Hardcopy , PDF

Withdrawn date

20-12-2023

Superseded by

EN 4700-002:2016

Language(s)

English

€228.66
Excluding VAT

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Wording of order
5 Health and safety
6 Technical requirements

Specifies the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting alloy bar and section.

DevelopmentNote
Supersedes PREN 3235-1, PREN 3235-3, PREN 4235-1 and PREN 4235-3. (06/2003)
DocumentType
Draft
Pages
31
ProductNote
Superseded by EN 4700-002:2016
PublisherName
Aerospace & Defence Industries Association of Europe
Status
Withdrawn
SupersededBy
Supersedes

I.S. EN 3161:2007 AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED, SOLUTION TREATED AND PRECIPITATION TREATED, BAR A OR D <= 200 MM, R[M] >= 930 MPA
PREN 3487 : 200P2 AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - BAR FOR MACHINING - A OR D <= 250 MM - 500 MPA <= R[M] <= 700 MPA
BS EN 2465:2007 Aerospace series. Steel FE-PA3901 (X2CrNi18-9). Softened. 450 MPa ≤ Rm ≤ 680 MPa. Bar for machining. 4 mm ≤ De ≤ 100 mm
PREN 4656 : 200P1 AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1520 MPA
06/30146139 DC : 0 EN 2465 - AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18.9) - SOFTENED 450 -RM - 680 MPA - BAR FOR MACHINING, 4 - DE - 100
09/30211106 DC : 0 BS EN 2030 - AEROSPACE SERIES - STEEL FE-PM3501 (X105CRMO17) - HARDENED AND TEMPERED - BARS D <= 150 MM
BS EN 4642:2009 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Sheet and plate. 0,6 mm ≤ a ≤ 50 mm. 900 MPa ≤ Rm ≤ 1050 MPa
08/30180761 DC : DRAFT APR 2008
BS EN 2398:2008 Aerospace series. Heat resisting steel FE-PA2601(X6NiCrTiMoV26-15). Rm ≥ 900 MPa. Bars for machined bolts. D ≤ 25 mm
BS EN 4318:2007 Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated, bar and section De ? 100 mm, Rm ? 960 MPa
BS EN 3490:2007 Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted. Hardened and tempered. Bar for machining. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1100 MPa
06/30146155 DC : 0 EN 4631 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED HARDENED AND TEMPERED BAR - DE = 200 MM 900 MPA = RM = 1 050 MPA
BS EN 2817:2009 Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 1070 MPa
PREN 4657 : 200P1 AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1650 MPA
NF EN 2465 : 2008 AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18-9) - SOFTENED - 450 MPA <= R[M] <= 680 MPA - BAR FOR MACHINING - 4 MM <= D[E] <= 100 MM
I.S. EN 4642:2009 AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND PLATE - 0,6 MM <= A <= 50 MM - 900 MPA <= R[M] <= 1050 MPA
I.S. EN 3487:2007 AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - BAR FOR MACHINING - A OR D <= 250 MM - 500 MPA <= R[M] <= 700 MPA
09/30205255 DC : 0 BS EN 2482 - AEROSPACE SERIES - STEEL FE-PL2108 (36NICRMO16) - 1100 MPA <= R[M] <= 1300 MPA - BARS - D[E] <= 100 MM
08/30181052 DC : DRAFT APR 2008
BS EN 4467:2007 Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1200 MPa
BS EN 2446:2008 Aerospace series. Steel FE-PL1503 (35CrMo4). 1100 MPa ≤ Rm ≤ 1300 MPa. Bars. De ≤ 25 mm
I.S. EN 2448:2008 AEROSPACE SERIES - STEEL FE-PL1503 (35CRMO4) - 900 MPA <= R[M] <= 1100 MPA - BARS - D[E] <= 40 MM
I.S. EN 4463:2007
PREN 2482 : 200P1 AEROSPACE SERIES - STEEL FE-PL2108 (36NICRMO16) - 1100 MPA <= R[M] <= 1300 MPA - BARS - D[E] <= 100 MM
PREN 3528 : 200P2 AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA
I.S. EN 2399:2008 AEROSPACE SERIES - HEAT RESISTING STEEL FE-PA2601 (X4NICRTIMOV26-15) - R[M] >= 900 MPA - BARS FOR FORGED BOLTS - D <= 25 MM
I.S. EN 3330:2009 AEROSPACE SERIES - STEEL FE-PL1503 (35CRMO4) - ANNEALEAD - BAR AND WIRE - D[E] <= 40 MM - FOR PREVAILING TORQUE NUTS
I.S. EN 4467:2007
I.S. EN 2460:2009 AEROSPACE SERIES - STEEL FE-PM1901 (X12CR13) - 600 MPA <= R[M] <= 800 MPA - BARS - D[E] <= 70 MM
I.S. EN 2205:2009 AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - 900 MPA <= R[M] <= 1100 MPA - BARS - D[E] <= 40 MM
I.S. EN 3160:2007 AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED, SOLUTION TREATED AND PRECIPITATION TREATED, BAR A OR D <= 200 MM, R[M] >= 1310 MPA
I.S. EN 2446:2008 AEROSPACE SERIES - STEEL FE-PL1503 (35CRMO4) - 1100 MPA <= R[M] <= 1300 MPA - BARS - D[E] <= 25 MM
I.S. EN 4655:2010 AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BARS - A OR D <= 200 MM - R[M] >= 1400 MPA
I.S. EN 2398:2008 AEROSPACE SERIES - HEAT RESISTING STEEL FE-PA2601 (X6NICRTIMOV26-15) - R[M] >= 900 MPA - BARS FOR MACHINED BOLTS - D <= 25 MM
I.S. EN 2206:2008 AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - 650 MPA <= R[M] <= 850 MPA - BARS - D[E] <= 150 MM
PREN 4631 : 200P2 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA
I.S. EN 2817:2009 AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR FOR MACHINING - A OR D <= 200 MM - R[M] >= 1070 MPA
I.S. EN 2438:2008 AEROSPACE SERIES - STEEL FE-PL2102 (35NICR6) - 900 MPA <= R[M] <= 1100 MPA - BARS - D[E] <= 40 MM
I.S. EN 2465:2007 AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18-9) - SOFTENED - 450 MPA <= R[M] <= 680 MPA - BAR FOR MACHINING - 4 MM <= D[E] <= 100 MM
I.S. EN 4461:2007
BS EN 2448:2008 Aerospace series. Steel FE-PL1503 (35CrMo4). 900 MPa ≤ Rm ≤ 1100 MPa. Bars. De ≤ 40 mm
06/30146957 DC : 0 EN 3488 - AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18.10) - AIR MELTED SOFTENED SHEET AND STRIP A = 6 MM 500 = RM = 700 MPA
BS EN 2399:2008 Aerospace series. Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15). Rm ≥ 900 MPa. Bars for forged bolts. D ≤ 25 mm
BS EN 3487:2007 Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened. Bar for machining. a or D ≤ 250 mm. 500 MPa ≤ Rm ≤ 700 MPa
10/30239354 DC : 0 BS EN 4720 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA
BS EN 4468:2007 Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1300 MPa
BS EN 4461:2007 Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1200 MPa
BS EN 3523:2007 Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Bar for machining. De ≤ 100 mm. 1080 MPa ≤ Rm ≤ 1280 MPa
12/30263296 DC : 0 BS EN 2278 - AEROSPACE SERIES - STEEL FE-PM1502 (Z12CNDV12) - 900 MPA <= R[M] <= 1100 MPA - BARS - D[E] <= 150 MM
BS EN 2206:2008 Aerospace series. Steel FE-PL1502 (25CrMo4). 650 MPa ≤ Rm ≤ 850 MPa. Bars. De ≤ 150 mm
BS EN 3161:2007 Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa
BS EN 2478:2008 Aerospace series. Steel FE-PL2107 (30NiCrMo16). 1220 MPa ≤ Rm ≤ 1370 MPa. Bars. De ≤ 40 mm
BS EN 2542:2008 Aerospace series. Steel FE-PL1502 (25CrMo4). Annealed. Bar and wire. De ≤ 40 mm. For prevailing torque nuts
06/30146677 DC : 0 EN 3487 - AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) AIR MELTED SOFTENED BAR FOR MACHINING A OR D - 250 MM 500 - RM - 700 MPA
09/30204515 DC : DRAFT MAY 2009 BS EN 3528 - AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - D[E] <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA
BS EN 4463:2007 Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa
BS EN 2438:2008 Aerospace series. Steel FE-PL2102 (35NiCr6). 900 MPa ≤ Rm ≤ 1100 MPa. Bars. De ≤ 40 mm
BS EN 2205:2009 Aerospace series. Steel FE-PL1502 (25CrMo4). 900 MPa ≤ Rm ≤ 1100 MPa. Bars. De ≤ 40 mm
BS EN 3330:2009 Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed. Bar and wire. De ≤ 40 mm. For prevailing torque nuts
BS EN 2460:2009 Aerospace series. Steel FE-PM1901 (X12CrNi13). 600 MPa ≤ Rm ≤ 800 MPa. Bars. De ≤ 70 mm
BS EN 3160:2007 Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1310 MPa
BS EN 2821:2007 Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 1310 MPa
06/30146391 DC : 0 EN 2467 - AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18.9) - AIR MELTED SOFTENED PLATE SHEET AND STRIP 0,4 = A = 20 MM 520 = RM = 670 MPA
EN 3487:2007 Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Bar for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa
EN 2446:2008 Aerospace series - Steel FE-PL1503 (35CrMo4) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 25 mm
EN 2438:2008 Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm
EN 2821:2007 Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 1 310 MPa
EN 4315:2007 Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section a or D ≤ 100 mm, Rm ≥ 900 MPa
EN 2480:2008 Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Bars - De ≤ 75 mm
EN 2448:2008 Aerospace series - Steel FE-PL1503 (35CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm
EN 2460:2009 Aerospace series - Steel FE-PM1901 (X12CrNi13) - 600 MPa ≤ Rm ≤ 800 MPa - Bars - De ≤ 70 mm
EN 2399:2008 Aerospace series - Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) - Rm ≥ 900 MPa - Bars for forged bolts - D ≤ 25 mm
EN 4642:2009 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Sheet and plate - 0,6 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
EN 4469:2007 Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 400 MPa
EN 2478:2008 Aerospace series - Steel FE-PL2107 (30NiCrMo16) - 1 220 MPa ≤ Rm ≤ 1 370 MPa - Bars - De ≤ 40 mm
EN 4462:2007 Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa
EN 4463:2007 Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 400 MPa
EN 3490:2007 Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Bar for machining - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
EN 2206:2008 Aerospace series - Steel FE-PL1502 (25CrMo4) - 650 MPa ≤ Rm ≤ 850 MPa - Bars - De ≤ 150 mm
EN 3160:2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1 310 MPa
EN 4467:2007 Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 200 MPa
EN 3330:2009 Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealead - Bar and wire - De ≤ 40 mm - For prevailing torque nuts
EN 2398:2008 Aerospace series - Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) - Rm ≥ 900 MPa - Bars for machined bolts - D ≤ 25 mm
EN 2465:2007 Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Softened - 450 MPa ≤ Rm ≤ 680 MPa - Bar for machining - 4 mm ≤ De ≤ 100 mm
EN 3161:2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa
EN 2542:2008 Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Bar and wire - De ≤ 40 mm - For prevailing torque nuts
EN 3523:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa
EN 4461:2007 Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 200 MPa
EN 4468:2007 Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa
EN 2815:2009 Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 965 MPa
EN 3972:2006 Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa
EN 4318:2007 Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section De ≤ 100 mm, Rm ≥ 960 MPa
EN 2205:2009 Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm
EN 2817:2009 Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 1 070 MPa
PREN 4628 : 200P2 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA
PREN 2213 : 200P1 AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - BARS - D[E] <= 16 MM - 980 MPA <= R[M] <= 1180 MPA
PREN 4500-005 : 200P2 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS
PREN 4655 : 200P1 AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1400 MPA
PREN 2030 : 200P1 AEROSPACE SERIES - STEEL FE-PM3501 (X105CRMO17) - HARDENED AND TEMPERED - BARS D[E] <= 150 MM
PREN 4500-003 : 200P2 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING SLLOYS
I.S. EN 2542:2008 AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - ANNEALED - BAR AND WIRE - D[E] <= 40 MM - FOR PREVAILING TORQUE NUTS
I.S. EN 4462:2007
I.S. EN 2480:2008 AEROSPACE SERIES - STEEL FE-PL2108 (36NICRMO16) - 1250 MPA <= R[M] <= 1400 MPA - BARS - D[E] <= 75 MM
I.S. EN 4468:2007
I.S. EN 2815:2009 AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR FOR MACHINING - A OR D <= 200 MM - R[M] >= 965 MPA
I.S. EN 4469:2007
I.S. EN 2478:2008 AEROSPACE SERIES - STEEL FE-PL2107 (30NICRMO16) - 1220 MPA <= R[M] <= 1370 MPA - BARS - D[E] <= 40 MM
BS EN 2480:2008 Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1250 MPa ≤ Rm ≤ 1400 MPa. Bars. De ≤ 75 mm
09/30211096 DC : 0 BS EN 2213 - AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - 980 MPA <= R[M] <= 1180 MPA - BARS - D[E] <= 16 MM
06/30146146 DC : 0 EN 4628 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED HARDENED AND TEMPERED BAR - DE = 150 MM 1 100 MPA = RM = 1 300 MPA
06/30146674 DC : 0 EN 3480 - AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18.10) AIR MELTED SOFTENED PLATE 6
BS EN 4462:2007 Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1300 MPa
BS EN 2815:2009 Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 965 MPa
BS EN 4315:2007 Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated, bar and section a or D ? 100 mm, Rm ? 900 MPa
BS EN 3972:2006 Aerospace series. Steel FE-PL1507 (40CrMoV12). Consumable electrode remelted. Hardened and tempered. Bar for machining. De ≤ 50 mm. 1250 MPa ≤ Rm ≤ 1400 MPa
08/30181037 DC : DRAFT APR 2008
10/30239355 DC : 0 BS EN 4721 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED AND ELECTROSLAG REMELTED (ESR)-HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA

EN 9100:2009 Quality Management Systems - Requirements for Aviation, Space and Defense Organizations
ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
PREN 2002-16 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 16: NON-DESTRUCTIVE TESTING - PENETRANT TESTING
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
ISO 4967:2013 Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams
EN 10079:2007 Definition of steel products
EN 2950:2008 Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects
TR 2410 : 2 AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS
EN 2032-2:1994 Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition
ISO 642:1999 Steel — Hardenability test by end quenching (Jominy test)
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
EN 4050-4:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria
EN 4050-1:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements
EN 3987:2009 Aerospace series - Test methods for metallic materials - Constant amplitude force-controlled high cycle fatigue testing
SAE AMS 2750 : 2012 PYROMETRY
ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
ISO 3887:2003 Steels Determination of depth of decarburization
PREN 3874 : 200P1 AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED LOW CYCLE FATIGUE TESTING
ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
EN ISO 642:1999 Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999)
EN 2032-1:2001 Aerospace series - Metallic materials - Part 1: Conventional designation
ASTM E 1444 : 2005 Standard Practice for Magnetic Particle Testing
EN ISO 3651-1 : 1998 DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - PART 1: AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN NITRIC ACID MEDIUM BY MEASUREMENT OF LOSS IN MASS (HUEY TEST)
ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
EN ISO 3651-2 : 1998 DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
ISO 15549:2008 Non-destructive testing Eddy current testing General principles
ISO 643:2012 Steels Micrographic determination of the apparent grain size
PREN 4259 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 2002-002:2005 Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature
EN ISO 15549:2010 Non-destructive testing - Eddy current testing - General principles (ISO 15549:2008)
SAE AMS 2315 : 2013 DETERMINATION OF DELTA FERRITE CONTENT
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
EN 2002-005:2007 Aerospace series - Test methods for metallic materials - Part 005: Uninterrupted creep and stress-rupture testing
EN 4258:1998 Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use
EN 2002-001:2005 Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature
PREN 3988 : 200P1 AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE STRAIN-CONTROLLED LOW CYCLE FATIGUE TESTING
PREN 2951 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - MICROGRAPHIC DETERMINATION OF CONTENT OF NON-METALLIC INCLUSIONS
EN 2078:2001 Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.