EN 421:2010
Current
The latest, up-to-date edition.
Protective gloves against ionizing radiation and radioactive contamination
26-05-2010
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Marking
7 Information supplied by the manufacturer
Annex A (informative) Determination of water vapour
permeability
Annex B (informative) Warning
Annex C (informative) Uncertainty of measurement and
results interpretation
Annex D (informative) Significant technical changes
between this European Standard and the previous
edition
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 89/686/EEC
Bibliography
This European Standard specifies requirements and test methods for gloves to protect against ionizing radiation and radioactive contamination. The standard is applicable to gloves offering protection to the hand and various parts of the arm and shoulder. It applies also to gloves to be mounted in permanent containment enclosures.This European Standard also applies to intermediary sleeves used between a glove and a permanent containment enclosure (report to 4.7.2.3).The requirements of this European Standard do not apply to protective gloves against X-ray radiation.
Committee |
CEN/TC 162
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
NS EN 421 : 2010 | Identical |
SN EN 421:2010 | Identical |
NF EN 421 : 2010 | Identical |
NEN EN 421 : 2010 | Identical |
AS/NZS 2161.8:2002 | Identical |
DIN EN 421:2010-10 | Identical |
PN EN 421 : 2010 | Identical |
UNI EN 421 : 2010 | Identical |
UNE-EN 421:2010 | Identical |
I.S. EN 421:2010 | Identical |
NBN EN 421 : 2010 | Identical |
BS EN 421:2010 | Identical |
AS/NZS 2161.8:2024 | Identical |
BS EN 420 : 2003 | PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS |
S.R. CWA 16106:2010 | PPE FOR CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR, (CBRN) HAZARDS |
ISO 11933-2:1997 | Components for containment enclosures — Part 2: Gloves, welded bags, gaiters for remote - handling tongs and for manipulators |
I.S. EN 420:2003 | PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS |
EN 420:2003+A1:2009 | Protective gloves - General requirements and test methods |
UNI EN 420 : 2010 | PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS |
DIN EN 420:2010-03 | PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS |
EN 374-1:2003 | Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements |
ISO 11933-1:1997 | Components for containment enclosures — Part 1: Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units |
89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
EN 61331-1:2014 | Protective devices against diagnostic medical X-radiation - Part 1: Determination of attenuation properties of materials |
IEC 61331-1:2014 | Protective devices against diagnostic medical X-radiation - Part 1: Determination of attenuation properties of materials |
EN 388 : 1994 | PROTECTIVE GLOVES AGAINST MECHANICAL RISKS |
ISO/TR 11610:2004 | Protective clothing — Vocabulary |
ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
EN 420:2003+A1:2009 | Protective gloves - General requirements and test methods |
EN ISO/TR 11610 : 2004 | PROTECTIVE CLOTHING - VOCABULARY |
EN 374-2:2014 | Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration |
ISO 4648:1991 | Rubber, vulcanized or thermoplastic Determination of dimensions of test pieces and products for test purposes |
ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
ISO 11933-2:1997 | Components for containment enclosures — Part 2: Gloves, welded bags, gaiters for remote - handling tongs and for manipulators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.