EN 4632-004:2012
Current
The latest, up-to-date edition.
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
26-09-2012
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 Use of this standard
6 Updating
7 List of highly alloyed steels
8 Highly alloyed steels
Bibliography
This European Standard specifies the weldability and brazeability of materials or material families used in theaerospace industry.It comprises a series of sheets, by materials or material family, which:- indicate the main titles, the typical chemical composition and the main characteristics,- contain recommendations for welding and brazing,- indicate a degree of weldability or brazeability for a given process under defined conditions,- indicate a value for the welded joint mechanical resistance coefficient for each welding process whenextracted from relevant bibliographical references. Joint coefficient is the ratio of stress resistancetransversally to welded joint over tensile strength of parent alloy.It recommends ISO/TR 17671-3 and EN 1011-3 for pre-heating conditions specially for the welding ofmartensitic steels. These conditions depend on the line energy of welding, thickness, arc welding process andof hydrogen rate in filler metal.It applies unreservedly to the manufacturing of new parts or for repair.
Committee |
ASD-STAN
|
DevelopmentNote |
Supersedes PREN 4632-004. (10/2012)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
BS EN 4632-004:2012 | Identical |
PN EN 4632-004 : 2013 | Identical |
UNE-EN 4632-004:2012 | Identical |
UNI EN 4632-004 : 2014 | Identical |
SN EN 4632-004 : 2013 | Identical |
NEN EN 4632-004 : 2012 | Identical |
I.S. EN 4632-004:2012 | Identical |
DIN EN 4632-004:2013-11 | Identical |
NS EN 4632-004 : 2012 | Identical |
NF EN 4632-004 : 2013 | Identical |
NBN EN 4632-004 : 2012 | Identical |
UNI EN 4677-001 : 2013 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTION - JOINTS OF METALLIC MATERIALS BY ELECTRON BEAM WELDING - PART 001: QUALITY OF WELDED ASSEMBLIES |
14/30301120 DC : 0 | BS EN 4677-001 - AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - JOINTS OF METALLIC MATERIALS BY ELECTRON BEAM WELDING - PART 001: QUALITY OF WELDED ASSEMBLIES |
17/30361562 DC : 0 | BS EN 4677-001 - AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - JOINTS OF METALLIC MATERIALS BY ELECTRON BEAM WELDING - PART 001: QUALITY OF WELDED ASSEMBLIES |
PREN 2816 : 200P3 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED FORGINGS - A OR D <= 200 MM - R[M] >= 965 MPA |
AWS A5.14/A5.14M : 2011 | SPECIFICATION FOR NICKEL AND NICKEL-ALLOY BARE WELDING ELECTRODES AND RODS |
EN 2467:2007 | Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate, sheet and strip - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa |
EN 3161:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa |
EN 1045:1997 | Brazing - Fluxes for brazing - Classification and technical delivery conditions |
EN 4629:2013 | Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Softened - Forging stock - De ≤ 300 mm |
ISO 14343:2017 | Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification |
EN 3529 : 2010 | AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA |
EN 3890:2001 | Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding |
EN 3491:2006 | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - De ≤ 100 mm - 900 MPa ≤ Rm ≤ 1 100 MPa |
PREN 4575 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - SOLUTION TREATED AND DESCALED - SHEET AND PLATE - 3 MM < A <= 50 MM |
EN 2465:2007 | AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18-9) - SOFTENED - 450 MPA <= R[M] <= 680 MPA - BAR FOR MACHINING - 4 MM <= D[E] <= 100 MM |
EN 2469 : 2007 | AEROSPACE SERIES - STEEL FE-PA3901 (X1CRNI18-10) - AIR MELTED - SOFTENED - WIRES - 0,4 MM <= D <= 12,5 MM - 450 MPA <= R[M] <= 650 MPA |
PREN 3486 : 200P1 | AEROSPACE SERIES - STEEL FE-PM67 - SOLUTION ANNEALED AND PRECIPITATION HARDENED - 1400 <= R[M] <= 1550 MPA - FORGINGS - D[E] <= 100 MM |
EN 4632-001:2008 | Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements |
PREN 4570 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - SOLUTION TREATED - FORGINGS - D[E] <= 100 MM |
EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
EN 3359:2007 | Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
ISO/TR 17671-3:2002 | Welding Recommendations for welding of metallic materials Part 3: Arc welding of stainless steels |
EN 4642:2009 | Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Sheet and plate - 0,6 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa |
PREN 3357 : 200P2 | AEROSPACE SERIES - STEEL FE-PM1503 (X3CRNIMOAL 13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR FOR MACHINING - A OR D <= 150 MM - 1 200 MPA <= R[M] <= 1 400 MPA |
EN 3889:2001 | Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding |
PREN 3358 : 200P3 | |
EN 3162:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, sheet and strip a ≤ 6 mm, Rm ≥ 930 MPa |
EN 2821:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 1 310 MPa |
EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
SAE AMS 5825 : 2006 | STEEL, CORROSION-RESISTANT, WELDING WIRE 16.4CR - 4.8NI - 0.22CB(NB) - 3.6CU |
EN 4631:2013 | Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bar - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa |
PREN 2468 : 1 | AEROSPACE SERIES - STEEL FE-PA11 - SOFTENED - TUBES 0,5 MM <= A <= 5 MM |
EN 4470:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 200 MPa |
EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
PREN 4571 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - SOLUTION TREATED - BAR AND SECTION - D[E] <= 100 MM |
EN 3361:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a ≤ 6mm, 1 070 MPa ≤ Rm ≤ 1 220 MPa |
EN 4346:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted, softended, forging stock a or D ≤ 300 mm |
EN 4471:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 300 MPa |
PREN 3481 : 200P1 | AEROSPACE SERIES - STEEL FE-PA13 - ANNEALED - REFERENCE HEAT TREATMENT: SOFTENED - HOLLOW BARS - 5 <= A <= 12 MM |
PREN 2178 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2501 (X4NICRMOTI43-13) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 200 MM |
PREN 2278 : 1 | AEROSPACE SERIES - STEEL X12CRNIMOV12-3 (1.4933) - 900 MPA <= R[M] <= 1100 MPA - BARS - D[E] <= 150 MM |
PREN 3510 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2602 (X4NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM |
EN 4627:2014 | Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa |
PREN 4264 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2501 (X4NICRMOTI43-13) - AS FORGED - FORGING STOCK - A OR D <= 200 MM |
PREN 4573 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM |
EN 4314:2007 | Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Non heat treated, forging stock a or D ≤ 250 mm |
PREN 2279 : 1 | AEROSPACE SERIES - STEEL FE-PM37 - 900 MPA <= R[M] <= 1100 MPA - FORGINGS D[E] <= 150 MM |
EN 3531:2007 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a ≤ 6 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa |
EN 3480:2007 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - PLATE - 6 MM < A <= 50 MM - 500 MPA <= R[M] <= 700 MPA |
EN 3677:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 310 MPa |
EN 3678 : 2007 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - RM >= 930 MPA |
EN 3488:2007 | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Sheet and strip - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa |
EN 2466 : 2009 | AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI19-11) - SOFTENED - FORGINGS - D[E] <= 100 MM |
EN 4472:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 400 MPa |
EN 3469 : 2009 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1310 MPA |
EN 3479:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Plate - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm ≤ 1 220 MPa |
EN 2818:2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 070 MPa |
SAE AMS 6501 : 2007 | STEEL, MARAGING, WELDING WIRE, 18NI - 8.0CO - 4.9MO - 0.40TI - 0.10AL, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
EN ISO 14343:2017 | Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2017) |
EN 4467:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 200 MPa |
PREN 2177 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2501 (X4NICRMOTI43-13) - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - D[E] <= 100 MM |
PREN 4574 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - D[E] <= 100 MM |
PREN 2174 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2602 (X4NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - D[E] <= 100 MM - R[M] >= 850 MPA |
EN 4630:2014 | Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa |
EN 2815:2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 965 MPa |
PREN 3470 : 200P2 | |
EN 3532:2007 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa |
EN 4469:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 400 MPa |
PREN 4572 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - SOLUTION TREATED - SHEET AND STRIP - A <= 3 MM |
EN 4468:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa |
EN 3160:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1 310 MPa |
EN 3487:2007 | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Bar for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa |
EN 4628:2013 | Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bar - De ≤ 200 mm — 1 150 MPa ≤ Rm ≤ 1 300 MPa |
ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
PREN 3468 : 200P1 | AEROSPACE SERIES - STEEL FE-PA13 - SOFTENED - 500 < R[M] <= 700 MPA - FORGINGS - D[E] <= 100 MM |
EN ISO 18265:2013 | Metallic materials - Conversion of hardness values (ISO 18265:2013) |
PREN 3489 : 200P1 | AEROSPACE SERIES - STEEL FE-PA13 - SOFTENED - 500 <= R[M] <= 750 MPA - TUBES FOR STRUCTURES - 0,5 <= A <= 5 MM |
EN 3490:2007 | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Bar for machining - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa |
ISO 18265:2013 | Metallic materials — Conversion of hardness values |
PREN 2280 : 1 | AEROSPACE SERIES - STEEL FE-PM37 - 900 MPA <= R[M] <= 1100 MPA - SHEET A <= 6 MM |
EN 3365:2007 | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted, softened, forging stock a or D ≤ 300 mm |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
EN 2817:2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 1 070 MPa |
EN 4335:2002 | Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod |
PREN 2175 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2602 (X4NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET, STRIP AND PLATE - 0,5 MM <= A <= 10 MM - R[M] >= 850 MPA |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.