EN 4800-004:2010
Current
The latest, up-to-date edition.
Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire
03-11-2010
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Wording of order
5 Health and safety
6 Technical requirements
This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy wire. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
Committee |
ASD-STAN
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
NF EN 4800-004 : 2012 | Identical |
UNI EN 4800-004 : 2011 | Identical |
NEN EN 4800-004 : 2010 | Identical |
SN EN 4800-004:2011 | Identical |
NS EN 4800-004 : 2010 | Identical |
I.S. EN 4800-004:2010 | Identical |
DIN EN 4800-004:2011-06 | Identical |
NBN EN 4800-004 : 2010 | Identical |
PN EN 4800-004 : 2011 | Identical |
UNE-EN 4800-004:2010 | Identical |
BS EN 4800-004:2010 | Identical |
BS EN 3813:2013 | Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar and wire for forged fasteners. D<sub>e</sub> ≤ 50 mm |
UNI EN 4500-004 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
UNI EN 3813 : 2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - BAR AND WIRE FOR FORGED FASTENERS - DE <= 50 MM |
I.S. EN 4500-004:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
BS EN 4500-004:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards Specific rules for titanium and titanium alloys |
EN 4500-004:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 004: Specific rules for titanium and titanium alloys |
EN 3813:2013 | Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar and wire for forged fasteners - De ≤ 50 mm |
I.S. EN 3813:2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - BAR AND WIRE FOR FORGED FASTENERS - D[E] <= 50 MM |
ASD-STAN prEN 4500-004 P3:2023 | Aerospace series Metallic materials — Rules for drafting and presentation of material standards — Part 004: Specific rules for titanium and titanium alloys |
EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
PREN 2002-16 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 16: NON-DESTRUCTIVE TESTING - PENETRANT TESTING |
EN 2003-009:2007 | Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination |
TR 2410 : 2 | AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS |
EN 2032-2:1994 | Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
EN 3114-002:2007 | Aerospace series - Test method - Microstructure of (α + β) titanium alloy wrought products - Part 002: Microstructure of bars, sections, forging stock and forgings |
EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
ISO 9649:2016 | Metallic materials — Wire — Reverse torsion test |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN 3683:2007 | Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary α content - Point count method and line intercept method |
SAE AMS 2750 : 2012 | PYROMETRY |
EN 3684:2007 | Aerospace series - Test methods - Titanium alloy wrought products - Determination of β transus temperature - Metallographic method |
EN 2032-1:2001 | Aerospace series - Metallic materials - Part 1: Conventional designation |
ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
PREN 4259 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS |
EN 2002-002:2005 | Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature |
ISO 7802:2013 | Metallic materials — Wire — Wrapping test |
EN 3976:2006 | Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content |
ISO 7801:1984 | Metallic materials — Wire — Reverse bend test |
EN 2002-005:2007 | Aerospace series - Test methods for metallic materials - Part 005: Uninterrupted creep and stress-rupture testing |
EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
EN 2002-001:2005 | Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature |
ISO 7800:2012 | Metallic materials — Wire — Simple torsion test |
EN 3114-001:2006 | Aerospace series - Test method - Microstructure of (α + β) titanium alloy wrought products - Part 001: General requirements |
EN 3238:2010 | Aerospace series - Metallic materials - Test method - Shear test for wires and rivets |
EN 2078:2001 | Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.