EN 2032-2 : 1994

Current

Current The latest, up-to-date edition.

AEROSPACE SERIES - METALLIC MATERIALS - CODING OF METALLURGICAL CONDITION IN DELIVERY CONDITION

Available format(s):

Language(s):

Published date: 28-03-1994

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Principle
4 Allocated codes
5 Instructions for use

Abstract - (Show below) - (Hide below)

This standard specifies the code letters to be allocated to define the metallurgical condition of metallic semi-finished products in delivery conditions, for aerospace applications.

General Product Information - (Show below) - (Hide below)

Development Note	Supersedes PREN 2032/2. (11/2003)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current
Supersedes	PREN 2032/2 : 1985

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NF EN 2032-2 : 1994	Identical
DIN EN 2032-2:1994-05	Identical
UNE-EN 2032-2:1996	Identical
BS EN 2032-2:1994	Identical
NS EN 2032-2 : 1ED 1994	Identical
PN EN 2032-2 : 2001	Identical
NEN EN 2032-2 : 1994	Identical
NBN EN 2032-2 : 1994	Identical
I.S. EN 2032-2:1994	Identical
UNI EN 2032-2 : 1994	Identical
SNV DIN EN 2032-2 : 1994	Identical
UNE-EN 2032-2:1994	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

BS EN 3875:2017	Aerospace series. Metallic materials, Filler metal for brazing. Technical specification
BS EN 4700-001:2010	Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip
00/705877 DC : 0	PREN 4400-3 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION
01/716045 DC : 0	PREN 4800-7 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 7: RE-MELTING STOCK
NF EN 2117 : 2009	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P5056A (5056A)-H32 - WIRE FOR SOLID RIVETS - D <= 10 MM
13/30290101 DC : 0	BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
I.S. EN 3354:2013	AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - SHEET FOR SUPERPLASTIC FORMING - A <= 6 MM
BS EN 3813:2013	Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar and wire for forged fasteners. D_e ≤ 50 mm
UNI EN 4685 : 2011	AEROSPACE SERIES - TITANIUM TI10V2FE3AL - BARS - D < 110 MM - R[M] >= 1240 MPA
UNI EN 4700-006 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
05/30129551 DC : 0	PREN 4700-5 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK
01/710777 DC : 0	PREN 3875 - AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION
NF EN 4685 : 2012	AEROSPACE SERIES - TITANIUM TI10V2FE3AL - BARS - D < 110 MM - R[M] > OR = 1240 MPA
BS EN 3310:2011	Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Not heat treated. Forging stock, for annealed forgings. De ≤ 360 mm
BS EN 4700-005:2010	Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock
XP PREN 3359 : 1996 XP	AEROSPACE SERIES - STEEL FE-PM1503 (X3CRNIMOAI13.8.2) - VACUUM INDUCTION MELTED AND REMELTED - AS FORGED - FORGING STOCK - A OR D LESS THAN OR EQUAL TO 300MM
I.S. EN 4685:2011	AEROSPACE SERIES - TITANIUM TI10V2FE3AL - BARS - D < 110 MM - R[M] >= 1240 MPA
BS EN 4372:2009	Aerospace series. Heat resisting nickel alloy with copper NI-PD9001 (NiCu31). Wire for solid rivets. D ≤ 10 mm
PREN 2299 : 200P2	AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96HT - SOLUTION TREATED AND PRECIPITATION TREATED - TUBE
PREN 2770 : 200P1	AEROSPACE SERIES - STEEL FE-PL53S - HARDENED AND TEMPERED - 1050 <= R[M]<= 1220 MPA - SHEET AND PLATE - 0,5 <= A <= 12 MM
NF EN 3115 : 2009	AEROSPACE SERIES - ALUMINIUM ALLOY 7050-T73 - WIRE FOR SOLID RIVETS - D <= 10 MM
UNI EN 4800-006 : 2011	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
PREN 2115 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY 2117-T42 WIRE FOR SOLID RIVETS D <= 10 MM
PREN 4400-6 : 200P1	AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOYS - TECHNICAL SPECIFICATION - PART 6: ALUMINIUM ALLOY FORGING STOCK
PREN 3312 : 200P3	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AI-4V) - ANNEALED - FORGINGS - D[E] <= 150 MM
PREN 2769 : 200P2	AEROSPACE SERIES - STEEL FE-PL53S - HARDENED AND TEMPERED -1030 <= R[M] <= 1180 MPA - FORGINGS - D[E] <= 70 MM
PREN 3337 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY (7010) - SOLUTION TREATED AND ARTIFICIALLY AGED (T74511) - EXTRUDED BARS AND SECTIONS - (A OR D) <= 130 MM WITH PERIPHERAL COARSE GRAIN CONTROL
PREN 3353 : 200P1	AEROSPACE SERIES - TITANIUM ALLOY TI-P63 - SOLUTION TREATED AND AGED - R[M] >= 1100 MPA - BAR AND WIRE FOR FASTENERS MACHINED - D[E] <= 25 MM
PREN 3481 : 200P1	AEROSPACE SERIES - STEEL FE-PA13 - ANNEALED - REFERENCE HEAT TREATMENT: SOFTENED - HOLLOW BARS - 5 <= A <= 12 MM
PREN 3489 : 200P1	AEROSPACE SERIES - STEEL FE-PA13 - SOFTENED - 500 <= R[M] <= 750 MPA - TUBES FOR STRUCTURES - 0,5 <= A <= 5 MM
PREN 3513 : 200P1	AEROSPACE SERIES - STEEL FE-PL711 - HARDENED AND TEMPERED - 900 <= R[M] <= 1100 MPA - BAR AND WIRE - D[E] <= 45 MM
PREN 2296 : 200P2	AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED IN AIR - SOLUTION TREATED AND PRECIPITATION TREATED - R[M] >= 1080 MPA - FORGINGS
PREN 3456 : 200P3	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - SHEET AND STRIP, HOT ROLLED - A <= 6 MM
PREN 3471 : 200P1	AEROSPACE SERIES - STEEL FE-PA18 - QUENCHED AND COLD DRAWN - STRIP FOR SPRING A <= 4.0 MM
PREN 3482 : 200P1	AEROSPACE SERIES - STEEL FE-PA13 - ANNEALED REFERENCE HEAT TREATMENT: SOFTENED - FORGING STOCK - D[E] <= 100 MM
PREN 2600 : 200P1	AEROSPACE SERIES - DESIGNATION OF METALLIC SEMI-FINISHED PRODUCTS - RULES
PREN 3514 : 200P1	AEROSPACE SERIES - STEEL FE-PL711 - HARDENED AND TEMPERED - 1100 <= R[M] <= 1300 MPA - BAR AND WIRE FOR BOLTS - D[E] <= 25 MM
PREN 3551 : 200P2	AEROSPACE SERIES - ALUMINIUM ALLOY (7150) - SOLUTION TREATED, STRETCHED AND ARTIFICIALLY AGED (T6511) - EXTRUDED BARS AND SECTIONS - (A OR D) <= 90 MM
PREN 2669 : 200P2	AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED UNDER VACUUM - NOT HEAT TREATED - REFERENCE HEAT TREATMENT: SOLUTION TREATED AND PRECIPITATION TREATED - FORGING STOCK
PREN 4700-004 : 200P2	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 4: WIRE
PREN 4700-005 : 200P2	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
PREN 4400-4 : DRAFT 2003	AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE
PREN 4800-006 : 200P2	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS
PREN 4372 : 200P2	AEROSPACE SERIES - HEAT RESISTING NICKEL ALLOY WITH COPPER NI-PD9001 (NICU31) - WIRE FOR SOLID RIVETS - D <= 10 MM
PREN 4800-005 : 200P2	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK
PREN 3813 : 200P2	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AI-4V) - ANNEALED - BAR AND WIRE FOR FORGED FASTENERS - D[E] <= 50 MM
PREN 6000 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024-T351 - PLATE 6,0 MM < A <= 55 MM - CLOSE-TOLERANCE FLATNESS
PREN 3554 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY (7010) - SOLUTION TREATED, COLD COMPRESSED AND ARTIFICIALLY AGED (T7652) - HAND FORGINGS A <= 200 MM
PREN 4700-006 : 200P2	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
PREN 4800-003 : 200P2	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 3: TUBE
PREN 3879 : 200P2	AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR WELDING - TECHNICAL SPECIFICATION
PREN 4685 : 200P1	AEROSPACE SERIES - TITANIUM TI10V2FE3AL - BARS - D < 110 MM - R[M] >= 1240 MPA
I.S. EN 3355:2012	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - EXTRUDED SECTION - D[E] <= 150 MM - 900 MPA <= R[M] <= 1160 MPA
I.S. EN 3312:2012	AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - FORGINGS - D[E] <= 150 MM
UNI EN 3355 : 2013	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - EXTRUDED SECTION - D[E] <= 150 MM - 900 MPA <= R[M] <= 1160 MPA
I.S. EN 3351:2012	AEROSPACE SERIES - TITANIUM ALLOY TI-4AL-4MO-2SN - SOLUTION TREATED AND AGED - FORGINGS - D[E] <= 150 MM
I.S. EN 4700-007:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
NF EN 4700-007 : 2012	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
BS EN 3351:2012	Aerospace series. Titanium alloy Ti-4Al-4Mo-2Sn. Solution treated and aged. Forgings. De ≤ 150 mm
01/710778 DC : 0	PREN 3879 - AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR WELDING - TECHNICAL SPECIFICATION
BS EN 4700-006:2010	Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings
10/30228108 DC : 0	BS EN 4400-9 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOYS - TECHNICAL SPECIFICATION - PART 9: PRE-PRODUCTION AND PRODUCTION CASTINGS
BS EN 4500-001:2012	Aerospace series. Metallic materials. Rules for drafting and presentation of material standards General rules
BS EN 3464:2012	Aerospace series. Titanium alloy (Ti-6Al-4V). Annealed. Plate. 6 mm < a ≤ 100 mm
11/30247408 DC : 0	BS EN 2402 - AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-PH1201 (NI-P91-HT) - ANNEALED - WIRE D <= 10 MM
EN 4700-002:2016	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section
NF EN 2115 : 2009	AEROSPACE SERIES - ALUMINIUM ALLOY 2117-T42 - WIRE FOR SOLID RIVETS - D <= 10 MM
BS EN 4685:2011	Aerospace series. Titanium Ti10V2Fe3Al. Bars. D < 110 mm. Rm ≥ 1240 MPa
NF EN 2116 : 2009	AEROSPACE SERIES - ALUMINIUM ALLOY 2017A-T42 - WIRE FOR SOLID RIVETS - D <= 10 MM
UNI EN 4800-004 : 2011	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE
UNI EN 4500-001 : 2014	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES
NF EN 4700-005 : 2012	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
09/30201382 DC : 0	BS EN 4685 - AEROSPACE SERIES - TITANIUM TI10V2FE3AL - BARS - D < 110 MM - R[M] >= 1240 MPA
UNI EN 4800-005 : 2011	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
PREN 2298 : 200P2	AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96HT - SOLUTION TREATED AND PRECIPITATION TREATED - R[M] >= 1080 MPA - SHEET AND STRIP - 0,25 < A <= 3 MM
I.S. EN 4800-006:2010	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
PREN 3123 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-C27 - SOLUTION TREATED AND ARTIFICIALLY AGED (T6) - STRUCTURAL PRECISION CASTINGS
01/716043 DC : 0	PREN 4800-5 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK
NF EN 4800-003 : 2012	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE
PREN 3367 : 200P1	AEROSPACE SERIES - STEEL FE-PL10 - HARDENED, TEMPERED AND COLD DRAWN - 1260 <= R[M] <= 2790 MPA - WIRE FOR SPRING - 0,20 <= D <= 10,50 MM
PREN 3348 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY (2024) - SOLUTION TREATED AND ARTIFICIALLY AGED (T62) - PLATE - 6 <= A <= 50 MM
PREN 3351 : 200P3	AEROSPACE SERIES - TITANIUM ALLOY TI-4AL-4MO-2SN - SOLUTION TREATED AND AGED - FORGINGS - D[E] <= 150MM
PREN 3115 : 200P2	AEROSPACE SERIES - ALUMINIUM ALLOY 7050- T73 WIRE FOR SOLID RIVETS D <= 10 MM
PREN 2541 : 200P2	AEROSPACE SERIES - STEEL FE-PA 18 QUENCHED AND COLD DRAWN - WIRE FOR SPRING - D <= 4,0 MM
PREN 2919 : 200P2	AEROSPACE SERIES - STEEL FE-PL72 - CARBURIZED, HARDENED AND TEMPERED - BAR - D[E] <= 160 MM
PREN 3486 : 200P1	AEROSPACE SERIES - STEEL FE-PM67 - SOLUTION ANNEALED AND PRECIPITATION HARDENED - 1400 <= R[M] <= 1550 MPA - FORGINGS - D[E] <= 100 MM
PREN 3366 : 200P1	AEROSPACE SERIES - STEEL FE-CM68 - AS MANUFACTURED - REFERENCE HEAT TREATMENT: SOLUTION TREATED - REMELTING STOCK
PREN 3329 : 200P1	AEROSPACE SERIES - STEEL FE-PL45 - ANNEALED - SHEET AND STRIP - 0,3 <= A <= 2 MM FOR PREVAILING TORQUE NUTS
PREN 3340 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY (7050) - SOLUTION TREATED AND ARTIFICIALLY AGED (T76) - DIE FORGINGS - A <= 200 MM
PREN 4800-001 : 200P2	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 1: PLATE, SHEET AND STRIP
I.S. EN 3464:2012	AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - PLATE - 6 MM < A <= 100 MM
I.S. EN 4800-002:2010	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
NF EN 4800-006 : 2012	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
NF EN 4800-002 : 2012	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
UNI EN 4700-007 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
I.S. EN 4700-006:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
NF EN 4700-002 : 2012	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
EN 3875:2017	Aerospace series - Metallic materials, Filler metal for brazing - Technical specification
BS EN 3312:2012	Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Forgings De ≤ 150 mm
BS EN 4700-004:2010	Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire
95/705079 DC : 0	TR 2410 - AEROSPACE SERIES - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND METALLIC MATERIAL STANDARDS
NF EN 4800-005 : 2012	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
UNI EN 4700-005 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
95/712874 DC : 0	PREN 4500-1 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 1: GENERAL RULES
UNI EN 3456 : 2013	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - SHEET AND STRIP, HOT ROLLED - A <= 6 MM
BS EN 2117:2009	Aerospace series. Aluminium alloy AL-P5056A (5056A)-H32. Wire for solid rivets. D ≤ 10 mm
BS EN 4700-002:2016	Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section
03/306584 DC : 0	EN 4400-5 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 5: ALUMINIUM AND ALUMINIUM ALLOY RIVET WIRE
BS EN 3456:2012	Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Sheet and strip, hot rolled. a ≤ 6 mm
UNI EN 4700-004 : 2011	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire
BS EN 4800-006:2010	Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production forgings
UNI EN 3813 : 2013	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - BAR AND WIRE FOR FORGED FASTENERS - DE <= 50 MM
BS EN 4800-005:2010	Aerospace series. Titanium and titanium alloys. Technical specification Forging stock
02/708860 DC : 0	PREN 4800-1 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 1: PLATE, SHEET AND STRIP
XP PREN 3364 : 1996 XP	AEROSPACE SERIES - STEEL FE-PM64 - SOFTENED - REFERENCE HEAT TREATMENT: SOLUTION ANNEALED AND PRECIPITATION HARDENED - FORGING STOCK - DE =< 300 MM
BS EN 4800-004:2010	Aerospace series. Titanium and titanium alloys. Technical specification Wire
UNI EN 4800-008 : 2011	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS
BS EN 3115:2009	Aerospace series. Aluminium alloy 7050-T73. Wire for solid rivets. D ≤ 10 mm
NF EN 4700-006 : 2012	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
BS EN 2116:2009	Aerospace series. Aluminium alloy 2017A-T42. Wire for solid rivets. D ≤ 10 mm
PREN 2920 : 200P2	AEROSPACE SERIES - STEEL FE-PL72 - CARBURIZED, HARDENED AND TEMPERED - FORGINGS - D[E] <= 160 MM
PREN 3363 : 200P1	AEROSPACE SERIES - STEEL FE-CM68 - SOLUTION TREATED - R[M] >= 485 MPA - SAND OR INVESTMENT CASTING
UNI EN 3351 : 2013	AEROSPACE SERIES - TITANIUM ALLOY TI-4AL-4MO-2SN - SOLUTION TREATED AND AGED - FORGINGS - D[E] <= 150 MM
PREN 2295 : 200P2	AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED IN AIR - NON TREATED - FORGING STOCK
PREN 2297 : 200P1	AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96HT - SOLUTION TREATED AND PRECIPITATION TREATED - R[M] >= 1080 MPA - BAR AND SECTIONS FOR WELDED RINGS
PREN 3550 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY (2024) - SOLUTION TREATED, STRETCHED AND ARTIFICIALLY AGED (T8511) - EXTRUDED BARS AND SECTIONS - (A OR D) <= 150 MM
PREN 3355 : 200P3	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AI-4V) - ANNEALED - EXTRUDED SECTION - D[E] <= 150 MM - 900 MPA <= R[M] <= 1160 MM MPA
PREN 3343 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY (7010) - SOLUTION TREATED AND ARTIFICIALLY AGED (T76511) - EXTRUDED BARS AND SECTIONS - 1 < (A OR D) <= 130 MM WITH PERIPHERAL COARSE GRAIN CONTROL
PREN 3485 : 200P1	AEROSPACE SERIES - STEEL FE-CM61 - HOMOGENISED, SOLUTION TREATED, PRECIPITATION HARDENED AND SUB ZERO - R[M] >= 830 MPA - MEDIUM STRENGTH - SAND OR INVESTMENT CASTING
PREN 3484 : 200P1	AEROSPACE SERIES - STEEL FE-CM61 - AS CAST - REFERENCE HEAT TREATMENT: HOMOGENISED, SOLUTION TREATED, PRECIPITATION HARDENED AND SUB ZERO - REMELTING STOCK
PREN 3530 : 200P1	AEROSPACE SERIES - STEEL FE-PA95 - SOFTENED - REFERENCE HEAT TREATMENT: SOLUTION TREATED AND PRECIPITATION TREATED - FORGING STOCK - D[E] <= 200 MM
PREN 3492 : 200P1	AEROSPACE SERIES - STEEL FE-PM44 - HARDENED AND TEMPERED - BAR FOR MACHINING - D[E] <= 150 MM
PREN 3349 : 200P2	AEROSPACE SERIES - MAGNESIUM ALLOY MG-C92 - SOLUTION TREATED AND ARTIFICIALLY AGED (T6) - CASTING
PREN 3310 : 200P3	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - NOT HEAT TREATED - FORGING STOCK, FOR ANNEALED FORGINGS - D[E] <= 360 MM
PREN 3464 : 200P3	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - PLATE - 6 MM < A <= 100 MM
BS EN 3355:2012	Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Extruded section. De ≤ 150 mm. 900 MPa ≤ Rm ≤ 1 160 MPa
UNI EN 4700-003 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
NF EN 4700-003 : 2012	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
I.S. EN 4800-004:2010	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE
UNI EN 4800-007 : 2011	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
I.S. EN 2115:2009	AEROSPACE SERIES - ALUMINIUM ALLOY 2117-T42 - WIRE FOR SOLID RIVETS - D <= 10 MM
EN 3310 : 2011	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - NOT HEAT TREATED - FORGING STOCK, FOR ANNEALED FORGINGS - D[E] <= 360 MM
UNI EN 4800-001 : 2011	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
NF EN 4800-008 : 2012	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS
NF EN 4800-007 : 2012	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
UNI EN 3464 : 2013	AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - PLATE - 6 MM < A <= 100 MM
BS EN 4800-008:2010	Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production castings
UNI EN 4800-003 : 2011	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE
10/30239356 DC : 0	BS EN 4500-1 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 1: GENERAL RULES
UNI EN 3310 : 2012	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - NOT HEAT TREATED - FORGING STOCK, FOR ANNEALED FORGINGS - D[E] <= 360 MM
I.S. EN 4700-002:2016	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
01/716046 DC : 0	PREN 4800-8 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 8: PRE-PRODUCTION AND PRODUCTION CASTINGS
BS EN 4700-003:2010	Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube
BS EN 4800-001:2010	Aerospace series. Titanium and titanium alloys. Technical specification Plate, sheet and strip
BS EN 4800-002:2010	Aerospace series. Titanium and titanium alloys. Technical specification Bar and section
03/306585 DC : 0	EN 4400-7 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 7: ALUMINIUM ALLOY FORGINGS
BS EN 4800-003:2010	Aerospace series. Titanium and titanium alloys. Technical specification Tube
PREN 2633 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - T3511 - EXTRUDED BARS AND SECTIONS 1,2 MM <= D[E] <= 160 MM WITH PERIPHERAL COARSE GRAIN CONTROL
PREN 3330 : 200P1	AEROSPACE SERIES - STEEL FE-PL45 - ANNEALED - BAR AND WIRE - D[E] <= 40 MM FOR PREVAILING TORQUE NUTS
PREN 3122 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-C27 - SOLUTION TREATED AND ARTIFICIALLY AGED (T6) - HIGH STRENGTH - STRUCTURAL PRECISION CASTINGS
01/716044 DC : 0	EN 4800-6 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS
NF EN 4700-001 : 2012	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
PREN 2670 : 200P2	AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED UNDER VACUUM - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS
NF EN 4700-004 : 2012	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE
PREN 2767 : 200P2	AEROSPACE SERIES - STEEL FE-PL79 - CARBURIZED, HARDENED AND TEMPERED - 1180 <= R[M] <= 1550 MPA - BAR FOR MACHINING - D[E] <= 150 MM
PREN 4700-003 : 200P2	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
NF EN 4800-004 : 2012	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE
PREN 3458 : 200P1	AEROSPACE SERIES - TITANIUM ALLOY TI-P63 - ANNEALED - 900 <= R[M] <= 1160 MPA - BAR AND WIRE FOR FASTENERS MACHINED - D[E] <= 25 MM
05/30129555 DC : 0	PREN 4700-6 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS
PREN 3493 : 200P1	AEROSPACE SERIES - STEEL FE-PL48 - HARDENED AND TEMPERED - 1050 <= R[M] <= 1250 MPA - FORGINGS - D[E] <= 40 MM
PREN 3345 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY (7150) - SOLUTION TREATED, WATER QUENCHED CONTROLLED STRETCHED AND ARTIFICIALLY AGED (T6511) - EXTRUDED BAR AND SECTION - (A OR D) <= 90 MM WITH PERIPHERAL COARSE GRAIN CONTROL
PREN 3354 : 200P4	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AI-4V) - ANNEALED - SHEET FOR SUPERPLASTIC FORMING - A <= 6 MM
PREN 4800-002 : 200P2	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 2: BAR AND SECTION
PREN 4800-008 : 200P2	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 8: PRE-PRODUCTION AND PRODUCTION CASTINGS
I.S. EN 2117:2009	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P5056A (5056A)-H32 - WIRE FOR SOLID RIVETS - D <= 10 MM
I.S. EN 4800-005:2010	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
I.S. EN 4700-001:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
NF EN 4800-001 : 2012	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
UNI EN 4700-001 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
I.S. EN 2116:2009	AEROSPACE SERIES - ALUMINIUM ALLOY 2017A-T42 - WIRE FOR SOLID RIVETS - D <= 10 MM
I.S. EN 4700-005:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
I.S. EN 3115:2009	AEROSPACE SERIES - ALUMINIUM ALLOY 7050-T73 - WIRE FOR SOLID RIVETS - D <= 10 MM
I.S. EN 3875:2017	AEROSPACE SERIES - METALLIC MATERIALS, FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION
BS EN 4258:1998	Metallic materials. General organization of standardization. Links between types of EN standards and their use
EN 4800-003:2010	Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube
EN 3456:2012	Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled — a ≤ 6 mm
EN 4800-002:2010	Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section
EN 3355 : 2012	Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Extruded section - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 160 MPa
EN 3464:2012	Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Plate - 6 mm < a ≤ 100 mm
EN 4800-001:2010	Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip
EN 4372:2009	Aerospace series - Heat resisting nickel alloy with copper NI-PD9001 (NiCu31) - Wire for solid rivets - D ≤ 10 mm
EN 4700-005:2010	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock
EN 4258:1998	Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use
EN 4700-003:2010	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube
EN 2117 : 2009	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P5056A (5056A)-H32 - WIRE FOR SOLID RIVETS - D <= 10 MM
EN 2115:2009	Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D ≤ 10 mm
EN 3351 : 2012	AEROSPACE SERIES - TITANIUM ALLOY TI-4AL-4MO-2SN - SOLUTION TREATED AND AGED - FORGINGS - D[E] <= 150 MM
EN 4500-001:2012	Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules
EN 4700-007:2010	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock
EN 3813:2013	Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar and wire for forged fasteners - De ≤ 50 mm
EN 4800-004:2010	Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire
EN 2116 : 2009	AEROSPACE SERIES - ALUMINIUM ALLOY 2017A-T42 - WIRE FOR SOLID RIVETS - D <= 10 MM
EN 3115:2009	Aerospace series - Aluminium alloy 7050-T73 - Wire for solid rivets — D ≤ 10 mm
EN 3354 : 2013	AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - SHEET FOR SUPERPLASTIC FORMING - A <= 6 MM
EN 4800-008:2010	Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-production and production castings
EN 4800-007:2010	Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock
EN 4700-004:2010	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire
EN 4800-005:2010	Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock
EN 4700-001:2010	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip
EN 4800-006:2010	Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings
EN 4685:2011	Aerospace series - Titanium Ti10V2Fe3Al - Bars - D < 110 mm - Rm ≥ 1 240 MPa
EN 4700-006:2010	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings
07/30157997 DC : 0	EN 2116 - AEROSPACE SERIES - ALUMINIUM ALLOY 2017A-T42 - WIRE FOR SOLID RIVETS - D <= 10 MM
05/30129558 DC : 0	PREN 4700-7 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK
BS EN 2115:2009	Aerospace series. Aluminium alloy 2117-T42. Wire for solid rivets. D ≤ 10 mm
I.S. EN 3310:2011	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - NOT HEAT TREATED - FORGING STOCK, FOR ANNEALED FORGINGS - D[E] <= 360 MM
I.S. EN 4700-003:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
I.S. EN 4372:2009	AEROSPACE SERIES - HEAT RESISTING NICKEL ALLOY WITH COPPER NI-PD9001 (NICU31) - WIRE FOR SOLID RIVETS - D <= 10 MM
BS EN 3354:2013	Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Sheet for superplastic forming. a ≤ 6 mm
BS EN 4700-007:2010	Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock
I.S. EN 4800-003:2010	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE
NF EN 4372 : 2009	AEROSPACE SERIES - HEAT RESISTING NICKEL ALLOY WITH COPPER NI-PD9001 (NICU31) - WIRE FOR SOLID RIVETS - D <= 10 MM
XP PREN 4258 : 1996 XP	AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE
BS EN 4800-007:2010	Aerospace series. Titanium and titanium alloys Remelting stock
I.S. EN 4800-007:2010	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
03/310514 DC : 0	BS EN 4400-4 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE
PREN 3875 : 200P2	AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION
PREN 2542 : 200P2	AEROSPACE SERIES - STEEL FE-PL43S - ANNEALED - BAR AND WIRE - D[E] <= 40 MM FOR PREVAILING TORQUE NUTS
PREN 2768 : 200P2	AEROSPACE SERIES - STEEL FE-PL79 - CARBURIZED, HARDENED AND TEMPERED -1180 <= R[M] <= 1550 MPA - FORGINGS - D[E] <= 150 MM
PREN 2771 : 200P2	AEROSPACE SERIES - STEEL FE-PL53S - HARDENED AND TEMPERED - 1100 <= R[M] <= 1250 MPA - BAR - D[E] <= 110 MM
PREN 2780 : 200P1	AEROSPACE SERIES - STEEL FE-PL56 - HARDENED AND TEMPERED - 1250 <= R[M] <= 1400 MPA - FORGINGS - D[E] <= 70 MM
NF EN 3310 : 2012	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AI-4V) - NOT HEAT TREATED - FORGING STOCK, FOR ANNEALED FORGINGS - D[E] < OR = 360 MM
PREN 2779 : 200P1	AEROSPACE SERIES - STEEL FE-PL56 - HARDENED AND TEMPERED - 1250 <= R[M] <= 1400 MPA - BAR - D[E] <= 70 MM
PREN 2543 : 200P2	AEROSPACE SERIES - STEEL FE-PL43S - ANNEALED - SHEET AND STRIP - 0,3 <= A <= 2 MM FOR PREVAILING TORQUE NUTS
PREN 3478 : 200P1	AEROSPACE SERIES - STEEL FE-PM63 - SOLUTION ANNEALED, TRANSFORMATION TREATED AND PRECIPITATION HARDENED - 1310 <= R[M] <= 1550 MPA - SHEET AND STRIP - A <= 6 MM
PREN 3555 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY (7075) - SOLUTION TREATED, CONTROLLED STRETCHED AND ARTIFICIALLY AGED (T79510) - EXTRUDED BARS AND SECTION 1.2 < (A OR D) <= 100 MM - WITH PERIPHERAL COARSE GRAIN CONTROL
PREN 4800-007 : 200P2	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK
PREN 2117 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY AL-P5056A (5056A)-H32 WIRE FOR SOLID RIVETS D <= 10 MM
PREN 2116 : 200P1	AEROSPACE SERIES - ALUMINIUM ALLOY 2017A T42 WIRE FOR SOLID RIVETS D <= 10 MM
PREN 4700-007 : 200P2	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
I.S. EN 3456:2012	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - SHEET AND STRIP, HOT ROLLED - A <= 6 MM
PREN 4800-004 : 200P2	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 4: WIRE
PREN 4700-001 : 200P2	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
PREN 3468 : 200P1	AEROSPACE SERIES - STEEL FE-PA13 - SOFTENED - 500 < R[M] <= 700 MPA - FORGINGS - D[E] <= 100 MM
PREN 3522 : 200P1	AEROSPACE SERIES - STEEL FE-PL79 - SOFTENED - REFERENCE HEAT TREATMENT: CARBURIZED, HARDENED AND TEMPERED - FORGING STOCK - D[E] <= 200 MM
PREN 4700-002 : 200P3	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
PREN 4500-001 : 200P2	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES
UNI EN 4800-002 : 2011	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
I.S. EN 4800-001:2010	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
I.S. EN 4800-008:2010	AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS
I.S. EN 4700-004:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE
I.S. EN 3813:2013	AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - BAR AND WIRE FOR FORGED FASTENERS - D[E] <= 50 MM
I.S. EN 4500-001:2012	AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES
UNI EN 3312 : 2013	AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - FORGINGS D[E] <= 150 MM

Standards Referencing This Book - (Show below) - (Hide below)

PREN 3350 : 200P2	AEROSPACE SERIES - ALUMINIUM, ALUMINIUM ALLOYS - TEMPER DESIGNATIONS
PREN 2500/1 : 200P4	AEROSPACE SERIES - INSTRUCTIONS FOR THE DRAFTING AND USE OF METALLIC MATERIAL STANDARDS - PART 1: GENERAL REQUIREMENTS

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart