EN 4800-005:2010
Current
Current
The latest, up-to-date edition.
Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock
Published date
03-11-2010
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Wording of order
5 Health and safety
6 Technical requirements
This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy forging stock. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 4800-005. (02/2013)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 4800-005 : 2012 | Identical |
| UNI EN 4800-005 : 2011 | Identical |
| SN EN 4800-005:2011 | Identical |
| NS EN 4800-005 : 2010 | Identical |
| I.S. EN 4800-005:2010 | Identical |
| NEN EN 4800-005 : 2010 | Identical |
| DIN EN 4800-005:2011-06 | Identical |
| NBN EN 4800-005 : 2010 | Identical |
| PN EN 4800-005 : 2011 | Identical |
| BS EN 4800-005:2010 | Identical |
| UNE-EN 4800-005:2010 | Identical |
| UNI EN 4800-006 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| I.S. EN 3312:2012 | AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - FORGINGS - D[E] <= 150 MM |
| I.S. EN 3351:2012 | AEROSPACE SERIES - TITANIUM ALLOY TI-4AL-4MO-2SN - SOLUTION TREATED AND AGED - FORGINGS - D[E] <= 150 MM |
| BS EN 3351:2012 | Aerospace series. Titanium alloy Ti-4Al-4Mo-2Sn. Solution treated and aged. Forgings. De ≤ 150 mm |
| I.S. EN 4800-006:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 3351 : 200P3 | AEROSPACE SERIES - TITANIUM ALLOY TI-4AL-4MO-2SN - SOLUTION TREATED AND AGED - FORGINGS - D[E] <= 150MM |
| NF EN 4800-006 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| BS EN 3312:2012 | Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Forgings De ≤ 150 mm |
| BS EN 4800-006:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production forgings |
| UNI EN 4500-004 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
| I.S. EN 4500-004:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
| BS EN 4500-004:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards Specific rules for titanium and titanium alloys |
| UNI EN 3351 : 2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-4AL-4MO-2SN - SOLUTION TREATED AND AGED - FORGINGS - D[E] <= 150 MM |
| 11/30242532 DC : DRAFT JAN 2011 | BS EN 3351 - AEROSPACE SERIES - TITANIUM ALLOY TI-P63001 (TI-4AL-4MO-2SN) - SOLUTION TREATED AND AGED - FORGINGS - D[E] <= 150 MM |
| EN 3351:2012 | Aerospace series - Titanium alloy Ti-4Al-4Mo-2Sn - Solution treated and aged - Forgings - De ≤ 150 mm |
| EN 4500-004:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 004: Specific rules for titanium and titanium alloys |
| EN 4800-006:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings |
| NF EN 3310 : 2012 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AI-4V) - NOT HEAT TREATED - FORGING STOCK, FOR ANNEALED FORGINGS - D[E] < OR = 360 MM |
| UNI EN 3312 : 2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - FORGINGS D[E] <= 150 MM |
| ASD-STAN prEN 4500-004 P3:2023 | Aerospace series Metallic materials — Rules for drafting and presentation of material standards — Part 004: Specific rules for titanium and titanium alloys |
| EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| EN ISO 12737:2010 | Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2010) |
| EN 2003-009:2007 | Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination |
| PREN 2957 : 200P1 | AEROSPACE SERIES - METHOD OF PREPARATION OF FORGED SAMPLES |
| PREN 4050-1 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION BARS, PLATES, FORGING STOCK AND FORGINGS - GENERAL INFORMATION |
| TR 2410 : 2 | AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS |
| EN 2032-2:1994 | Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 3114-002:2007 | Aerospace series - Test method - Microstructure of (α + β) titanium alloy wrought products - Part 002: Microstructure of bars, sections, forging stock and forgings |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 3873:2010 | Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces |
| EN 3987:2009 | Aerospace series - Test methods for metallic materials - Constant amplitude force-controlled high cycle fatigue testing |
| ISO 12737:2010 | Metallic materials Determination of plane-strain fracture toughness |
| EN 3683:2007 | Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary α content - Point count method and line intercept method |
| SAE AMS2750E | Pyrometry |
| EN 3684:2007 | Aerospace series - Test methods - Titanium alloy wrought products - Determination of β transus temperature - Metallographic method |
| PREN 3874 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED LOW CYCLE FATIGUE TESTING |
| EN 2032-1:2001 | Aerospace series - Metallic materials - Part 1: Conventional designation |
| EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| PREN 4259 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS |
| EN 2002-002:2005 | Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature |
| ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
| EN 3976:2006 | Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content |
| EN 2954-002:2010 | Aerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 002: Macrostructure of bar, section, forging stock and forgings |
| EN 2002-005:2007 | Aerospace series - Test methods for metallic materials - Part 005: Uninterrupted creep and stress-rupture testing |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| EN 2002-001:2005 | Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature |
| PREN 3988 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE STRAIN-CONTROLLED LOW CYCLE FATIGUE TESTING |
| EN 3114-001:2006 | Aerospace series - Test method - Microstructure of (α + β) titanium alloy wrought products - Part 001: General requirements |
| PREN 4050-4 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - ACCEPTANCE CRITERIA |
| EN 2078:2001 | Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.