EN 485-3:2003
Current
Current
The latest, up-to-date edition.
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products
Published date
19-03-2003
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Tolerances on dimension
3.1 Thickness
3.2 Width
3.3 Length
4 Tolerances on form
4.1 Lateral curvature
4.2 Flatness
4.3 Squareness
Bibliography
This part of EN 485 specifies the tolerances on shape and dimensions for wrought aluminium and aluminium alloy sheet, strip and plate obtained by hot-rolling, for general engineering applications. It applies to products with a thickness from 2,5 mm up to and including 400 mm. It does not apply to semi-finished rolled produits in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, ect., sheet and strip or to special applications such as aerospace which are dealt with in separate European Standards.
| Committee |
CEN/TC 132
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| PN EN 485-3 : 2005 | Identical |
| I.S. EN 485-3:2003 | Identical |
| SN EN 485-3 : 2003 | Identical |
| NBN EN 485-3 : 2003 | Identical |
| UNE-EN 485-3:2003 | Identical |
| NEN EN 485-3 : 2003 | Identical |
| BS EN 485-3:2003 | Identical |
| NS EN 485-3 : 2ED 2003 | Identical |
| UNI EN 485-3 : 2005 | Identical |
| NF EN 485-3 : 2003 | Identical |
| DIN EN 485-3:2003-06 | Identical |
| ONORM EN ISO 4126-2 : 2006 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES |
| UNE-EN 13195:2014 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| 17/30348213 DC : 0 | BS ISO 19426-4 - STRUCTURES FOR MINE SHAFTS - PART 4: CONVEYANCES |
| UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN EN 13195:2013-12 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| PREN 12392 : DRAFT 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| 06/30143946 DC : 0 | EN 485-1 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DD ENV 1999-1.1 : DRAFT DEC 2000 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 101: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| 98/105109 DC : DRAFT JUNE 1998 | PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: DURABILITY AND EVALUATION OF CONFORMITY |
| BS EN ISO 4126-2:2003 | Safety devices for protection against excessive pressure Bursting disc safety devices |
| ONORM EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| BS EN 13480-8:2017+A1:2019 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| BS EN 13480-8:2017 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| BS EN 14286:2008 | Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods |
| BS EN 851:2014 | Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils. Specifications |
| BS EN 13658-2:2005 | Metal lath and beads. Definitions, requirements and test methods External rendering |
| BS EN 1252-1:1998 | Cryogenic vessels. Materials Toughness requirements for temperatures below -80°C |
| EN 13195:2013 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| EN 13195-1 : 2002 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS |
| EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| UNI EN 13195 : 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| I.S. EN 1252-1:1998 | CRYOGENIC VESSELS - MATERIALS - PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BELOW -80 DEGREE C |
| ISO 19426-3:2018 | Structures for mine shafts — Part 3: Sinking stages |
| UNE-EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| ISO 4126-2:2003 | Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
| I.S. EN 16914:2017 | ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS |
| BS EN 1999-1-1 : 2007 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| I.S. EN 1999-1-1:2007 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES (INCLUDING IRISH NATIONAL ANNEX) |
| DIN EN 13981-2:2004-10 | Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 2: Plates and sheets |
| DIN EN 12487:2007-07 | Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| DIN EN 851:2014-07 | Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications |
| DIN EN 941:2014-07 | Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications |
| BS EN 941:2014 | Aluminium and aluminium alloys. Circle and circle stock for the production of general applications. Specifications |
| BS EN 1462:2004 | Brackets for eaves gutters. Requirements and testing |
| I.S. EN 851:2014 | ALUMINIUM AND ALUMINIUM ALLOYS - CIRCLE AND CIRCLE STOCK FOR THE PRODUCTION OF CULINARY UTENSILS - SPECIFICATIONS |
| I.S. EN 485-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 1462:2004 | BRACKETS FOR EAVES GUTTERS - REQUIREMENTS AND TESTING |
| I.S. EN 941:2014 | ALUMINIUM AND ALUMINIUM ALLOYS - CIRCLE AND CIRCLE STOCK FOR THE PRODUCTION OF GENERAL APPLICATIONS - SPECIFICATIONS |
| I.S. EN 14286:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
| I.S. EN 12392:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| I.S. EN 12487:2007 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN 13195-1:2002 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODU- PART 1: SPECIFICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| I.S. EN 13480-8:2017&LC:2019 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| UNI EN 14286 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
| DIN EN 1999-1-1:2014-03 | Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules |
| 12/30260023 DC : 0 | BS EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| 05/30133060 DC : 0 | EN 1090-3 - EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| 17/30348210 DC : 0 | BS ISO 19426-3 - STRUCTURES FOR MINE SHAFTS - PART 3: SINKING STAGES |
| I.S. EN 13195:2013 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| 02/710460 DC : DRAFT AUG 2002 | ISO/DIS 21028-1 - CRYOGENIC VESSELS - TOUGHNESS REQUIREMENTS FOR MATERIALS AT CRYOGENIC TEMPERATURE - PART 1: TEMPERATURES BELOW -80 DEGREES C |
| 08/30187526 DC : 0 | BS EN 14121 - ALUMINIUM AND ALUMINIUM ALLOYS - ALUMINIUM SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
| PREN 13480-8 : DRAFT 2012 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| DIN EN 12392:2016-08 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| DIN EN 573-5:2007-11 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
| DIN EN 1462:2004-12 | Brackets for eaves gutters - Requirements and testing; German version EN 1462:2004 |
| BS EN 13195-1:2002 | Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore) Specifications |
| BS EN 40-6:2002 | Lighting columns Requirements for aluminium lighting columns |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| UNI EN 12487 : 2007 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
| UNI EN 14121 : 2009 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
| 15/30327154 DC : 0 | BS EN 16914 - ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 1999-1-1 : 2014 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| 04/30125694 DC : DRAFT NOV 2004 | EN 15088 - ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| PREN 14121 : DRAFT 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - ALUMINIUM SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
| 15/30286859 DC : DRAFT JAN 2015 | BS EN ISO 21028-1 - CRYOGENIC VESSELS - TOUGHNESS REQUIREMENTS FOR MATERIALS AT CRYOGENIC TEMPERATURE - PART 1: TEMPERATURES BELOW -80 DEGREES C |
| I.S. EN ISO 4126-2:2003 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES |
| ISO 19426-4:2018 | Structures for mine shafts — Part 4: Conveyances |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN EN 16914:2015-12 (Draft) | ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS |
| I.S. ENV 1999-1-1:1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| DIN EN 485-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN 12392:2016 | Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment |
| BS EN 13658-1:2005 | Metal lath and beads. Definitions, requirements and test methods Internal plastering |
| BS EN 12487:2007 | Corrosion protection of metals. Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN 13981-2:2004 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Plates and sheets |
| UNE-EN 16914:2017 | Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions |
| DIN EN 15088:2016-09 (Draft) | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German and English version prEN 15088:2016 |
| BS EN 15088:2005 | Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery |
| UNE-EN 12392:2017 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| UNE-EN 485-1:2017 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| EN 13981-2:2004 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets |
| EN 1462:2004 | Brackets for eaves gutters - Requirements and testing |
| EN 13658-2:2005 | Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering |
| EN 15088:2005 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
| UNI EN 941 : 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - CIRCLE AND CIRCLE STOCK FOR THE PRODUCTION OF GENERAL APPLICATIONS - SPECIFICATIONS |
| EN 16914:2017 | Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions |
| EN 40-6:2002 | Lighting columns - Part 6: Requirements for aluminium lighting columns |
| EN 14121:2009 | Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications |
| EN 941:2014 | Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications |
| UNI EN 851 : 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - CIRCLE AND CIRCLE STOCK FOR THE PRODUCTION OF CULINARY UTENSILS - SPECIFICATIONS |
| EN 573-5:2007 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
| EN 13658-1:2005 | Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering |
| ENV 1999-1-1 : 1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| EN 851:2014 | Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications |
| EN 14286:2008 | Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
| EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| BS EN 13195:2013 | Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| 15/30317351 DC : 0 | BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| 14/30301152 DC : 0 | BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| BS EN 16914:2017 | Aluminium and aluminium alloys. Hot-rolled armour plates in weldable aluminium alloy. Technical delivery conditions |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| UNI EN ISO 4126-2 : 2003 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - BURSTING DISC SAFETY DEVICES |
| DIN EN 13658-1:2005-09 | Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering |
| DIN EN 13658-2:2005-09 | Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering |
| BS EN 573-5:2007 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Codification of standardized wrought products |
| BS EN 14121:2009 | Aluminium and aluminium alloys. Sheet, strip and plate for electrotechnical applications |
| DIN EN 13195-1:2002-11 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS |
| DIN EN 14121:2009-09 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
| DIN EN 15088:2006-03 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German version EN 15088:2005 |
| DIN EN 14286:2008-11 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.