• EN 50018 : 2000 AMD 1 2002

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D"

    Available format(s): 

    Superseded date:  01-03-2004

    Language(s): 

    Published date:  13-01-2013

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    GENERAL
    1 Scope
    2 Normative references
    3 Definitions
    4 Apparatus grouping and temperature classification
    SPECIFIC CONSTRUCTIONAL REQUIREMENTS
    5 Flameproof joints
    6 Cemented joints
    7 Operating rods
    8 Supplementary requirements for shaft and bearings
    9 Light-transmitting parts
    10 Breathing and draining devices which form part of a
       flameproof enclosure
    11 Fasteners, associated holes and closing devices
    12 Materials and mechanical strength of enclosures;
       materials inside the enclosures
    13 Entries for flameproof enclosures
    VERIFICATIONS AND TESTS
    14 General
    15 Type tests
    16 Routine tests
    OTHER REQUIREMENTS
    17 Switchgear
    18 Lampholders and lampcaps
    19 Non-metallic enclosures and non-metallic parts of
       enclosures
    20 Pressure transducers using capillaries
    ANNEX A (normative) Additional requirements for crimped
            ribbon elements of breathing and draining devices
    ANNEX B (normative) Additional requirements for elements,
            with non-measurable paths, of breathing and draining
            devices
    ANNEX C (normative) Additional requirements for flameproof
            cable entries
    ANNEX D (normative) Additional requirements for Group I,
            IIA and IIB for empty flameproof enclosures to be
            certified as Ex components and the utilization of
            such Ex Component certificates to obtain certificates
    ANNEX E (normative) Cells and batteries used in flameproof
            'd' enclousers
    Bibliography

    Abstract - (Show below) - (Hide below)

    Defines the specific requirements for the construction and testing of electrical apparatus with type of protection flameproof enclosure 'd' meant for use in potentially explosive atmospheres.

    General Product Information - (Show below) - (Hide below)

    Committee SC 31-2
    Development Note To be read in conjunction with EN 50014 (04/2001)
    Document Type Standard
    Publisher European Committee for Standards - Electrical
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    IEEE 303-2004 IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
    BS EN 50019:2000 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY 'E'
    02/710618 DC : DRAFT SEP 2002 BS EN 13852-2 - CRANES - OFFSHORE CRANES - PART 2: FLOATING CRANES
    BS EN 50381:2004 Transportable ventilated rooms with or without an internal source of release
    BS EN 50054:1999 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES - GENERAL REQUIREMENTS AND TEST METHODS
    04/30115503 DC : DRAFT JUN 2004 EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    07/30166909 DC : DRAFT AUG 2007 BS EN 15714-2 - INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
    I.S. EN 50019:2001 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E"
    DIN EN 12012-3:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
    EN 12405 : 2002 GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES
    HD 637 S1:1999/corrigendum:2005 POWER INSTALLATIONS EXCEEDING 1 KV A.C.
    EN 50381 : 2004 COR 2005 TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE
    EN 50073 : 1999 GUIDE FOR SELECTION, INSTALLATION, USE AND MAINTENANCE OF APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES OR OXYGEN
    EN 12012-3:2001+A1:2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
    EN 12012-2:2001+A2:2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    EN 50014:1997/A2:1999 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
    I.S. EN 45510-2-5:2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
    02/564413 DC : DRAFT OCT 2002 PREN 14583 - WORKPLACE ATMOSPHERES - VOLUMETRIC BIOAEROSOL SAMPLING DEVICES - REQUIREMENTS AND TEST METHODS
    UNI EN ISO 8230-3 : 2009 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
    I.S. EN 12405:2002 GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES
    94/713480 DC : DRAFT NOV 1994 PREN 1710 - MACHINES FOR UNDERGROUND MINES - REQUIREMENTS FOR APPLICATIONS IN AREAS OF MINES WITH FIREDAMP HAZARD - SAFETY REQUIREMENTS
    CLC/TR 50404 : 2003 ELECTROSTATICS - CODE OF PRACTICE FOR THE AVOIDANCE OF HAZARDS DUE TO STATIC ELECTRICITY
    02/540765 DC : DRAFT SEP 2002 BS EN 13463-3 - NON-ELECTRICAL EQUIPMENT FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 3: PROTECTION BY FLAMEPROOF ENCLOSURE 'D'
    UNI CEI EN 45510-2-5 : 2011 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
    BS EN 50016:2002 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PRESSURIZED APPARATUS "P"
    ISA 12.13.01 : 2003 PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS
    BS EN 45510-2-5:2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
    CEI 216-5/1 : 2002 ELECTRICAL EQUIPMENT FOR THE DETECTION AND THE MEASUREMENT OF BURNING VAPOURS OR GASES OR TOXIC AND OF OXYGEN FOR CONTINUOUS OPERATION IN FIXED INSTALLATIONS IN NON-HAZARDOUS AREAS - PART 1:GENERAL REQUIREMENTS AND TEST METHODS FOR CONTROL BOARDS AND CONTROL AND SIGNALLING BOARDS
    NF EN 50303 : 2000 GROUP I, CATEGORY M1 EQUIPMENT INTENDED TO REMAIN FUNCTIONAL IN ATMOSPHERES ENDANGERED BY FIREDAMP AND/OR COAL DUST
    I.S. EN 61779-1:2003 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    I.S. HD 637:1999 POWER INSTALLATIONS EXCEEDING 1 KV A.C.
    DIN EN 12012-2:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    DIN EN 13636:2004-10 Cathodic protection of buried metallic tanks and related piping; German version EN 13636:2004
    I.S. EN 12012-3:2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
    DIN EN 12405:2003-10 GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES
    I.S. EN 12012-2:2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    DIN EN 12012-2:2004-03 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    UNI EN 764-7 : 2004 PRESSURE EQUIPMENT - SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT
    VDE 0165-10 : 1999 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
    DIN EN 50303 : 2001-05 GROUP 1, CATEGORY M1 EQUIPMENT INTENDED TO REMAIN FUNCTIONAL IN ATMOSPHERES ENDANGERED BY FIREDAMP AND/OR COAL DUST
    VDE 0400-40-1 : 2000 AMD 1 2004 SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    VDE 0170-12-2 : 2001-05 GROUP 1, CATEGORY M1 EQUIPMENT INTENDED TO REMAIN FUNCTIONAL IN ATMOSPHERES ENDANGERED BY FIREDAMP AND/OR COAL DUST
    VDI/VDE 2184 : 2008 RELIABLE OPERATION AND MAINTENANCE OF FIELD BUS SYSTEMS
    06/30150265 DC : 0 EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
    I.S. EN 12874:2001 FLAME ARRESTERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND LIMITS FOR USE
    04/30124466 DC : DRAFT OCT 2004 EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    BS EN 50241-1:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours General requirements and test methods
    04/30112677 DC : 0 IEC 61779-1 ED.2 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    CSA PLUS 2203 : 2001 HAZARDOUS LOCATIONS - GUIDE FOR THE DESIGN, TESTING, CONSTRUCTION, AND INSTALLATION OF EQUIPMENT IN EXPLOSIVE ATMOSPHERES
    BS EN 50014:1998 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
    CEI EN 50381 : 2006 TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE
    EEMUA 186 : 2016 A PRACTITIONER'S HANDBOOK FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
    EN 50016:2002 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PRESSURIZED APPARATUS "P"
    UNI EN 12012-3 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
    EN 50241-1 : 99 AMD 1 2004 SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    UNI EN 12012-2 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    DIN EN 50241-1 : 2000 AMD 1 2004 SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    03/300200 DC : DRAFT JAN 2003 CENELEC TR 50404 - ELECTROSTATICS - CODE OF PRACTICE FOR THE AVOIDANCE OF HAZARDS DUE TO STATIC ELECTRICITY
    00/707659 DC : DRAFT APR 2000 PREN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
    BS EN 50303:2000 Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust
    95/704659 DC : DRAFT MAR 1995 PREN 1872 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR MINING VENTILATION MACHINERY - ELECTRICALLY DRIVEN FANS FOR UNDERGROUND USE
    DIN EN ISO 8230-3:2009-05 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
    CEI 216-5/3 : 2002 ELECTRICAL EQUIPMENT FOR THE DETECTION AND THE MEASUREMENT OF FLAMMABLE VAPOURS OR GASES OR TOXIC AND OF OXYGEN FOR CONTINUOUS OPERATION IN FIXED INSTALLATIONS IN NON-HAZARDOUS AREAS - PART 3:GENERAL REQUIREMENTS AND TEST METHODS FOR DETECTORS OF GASES AND FLAMMABLE VAPOURS WITH PROPORTIONAL OUTPUTS
    DIN EN 50284 : 2000 SPECIAL REQUIREMENTS FOR CONSTRUCTION, TEST AND MARKING OF ELECTRICAL APPARATUS OF EQUIPMENT GROUP II, CATEGORY 1 G
    CEI UNI EN 45510-2-5 : 2006 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
    04/19986707 DC : 0 BS EN 1804-4 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 4: ELECTRO-HYDRAULIC CONTROL SYSTEMS
    SAE AS 6479 : 2014 SPLICER, FUSION, FIBER OPTIC, AEROSPACE
    I.S. EN 50381:2004 TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE
    I.S. EN 50016:2002 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PRESSURIZED APPARATUS "P"
    DIN EN 764-7:2002-09 PRESSURE EQUIPMENT - PART 7: SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT
    BS EN 764-7:2002 PRESSURE EQUIPMENT - PART 7: SAFETY SYSTEMS FOR UNFIRED PRESSURE VESSELS
    ISO 8230-3:2008 Safety requirements for dry-cleaning machines Part 3: Machines using combustible solvents
    BS EN 1474:1997 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF LOADING/UNLOADING ARMS
    BS EN 1834-1:2000 RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF ENGINES FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1 - GROUP 2 ENGINES FOR USE IN FLAMMABLE GAS AND VAPOUR ATMOSPHERES
    BS EN 12012-3 : 2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
    BS EN 12405:2002 GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES
    BS EN 1834-2:2000 RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF ENGINES FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 2 - GROUP I ENGINES FOR USE IN UNDERGROUND WORKINGS SUSCEPTIBLE TO FIREDAMP AND/OR COMBUSTIBLE DUST
    BS EN 13636:2004 CATHODIC PROTECTION OF BURIED METALLIC TANKS AND RELATED PIPING
    EN 50284 : 1999 SPECIAL REQUIREMENTS FOR CONSTRUCTION, TEST AND MARKING OF ELECTRICAL APPARATUS OF EQUIPMENT GROUP 2, CATEGORY 1 G
    EN 1474 : 1997 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF LOADING/UNLOADING ARMS
    EN 1834-1 : 2000 RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF ENGINES FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: GROUP 2 ENGINES FOR USE IN FLAMMABLE GAS AND VAPOUR ATMOSPHERES
    EN 764-7:2002/AC:2006 PRESSURE EQUIPMENT - PART 7: SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT
    EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008)
    EN 45510-2-5 : 2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
    EN 13636 : 2004 CATHODIC PROTECTION OF BURIED METALLIC TANKS AND RELATED PIPING
    EN 1834-2 : 2000 RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF ENGINES FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 2: GROUP 1 ENGINES FOR USE IN UNDERGROUND WORKINGS SUSCEPTIBLE TO FIREDAMP AND/OR COMBUSTIBLE DUST
    EN 1532 : 1997 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP TO SHORE INTERFACE
    BS EN ISO 8230-3:2008 (published 2009-07) Safety requirements for dry-cleaning machines Machines using combustible solvents
    DIN EN 50014 : 2000 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
    03/119040 DC : DRAFT NOV 2003 PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
    I.S. EN 1474:1998 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF LOADING/UNLOADING ARMS
    I.S. EN 1532:1997 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP TO SHORE INTERFACE
    03/301332 DC : DRAFT JAN 2003 ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
    BS EN 50073:1999 Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
    BS EN 50284:1999 SPECIAL REQUIREMENTS FOR CONSTRUCTION, TEST AND MARKING OF ELECTRICAL APPARATUS OF EQUIPMENT GROUP 2, CATEGORY 1 G
    PD CLC/TR 50404:2003 ELECTROSTATICS - CODE OF PRACTICE FOR THE AVOIDANCE OF HAZARDS DUE TO STATIC ELECTRICITY
    I.S. 231:1979 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
    I.S. EN ISO 8230-3:2008 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
    CEI 216-5/2 : 2002 ELECTRICAL EQUIPMENT FOR THE DETECTION AND THE MEASUREMENT OF BURNING VAPOURS OR GASES OR TOXIC AND OF OXYGEN FOR CONTINUOUS OPERATION IN FIXED INSTALLATIONS IN NON-HAZARDOUS AREAS PART 2:GENERAL REQUIREMENTS AND TEST METHODS FOR DETECTORS OF GASES AND FLAMMABLE VAPOURS WITH ONE OR MORE FIXED ALARM LEVELS
    I.S. CLC/TR 50404:2006 ELECTROSTATICS - CODE OF PRACTICE FOR THE AVOIDANCE OF HAZARDS DUE TO STATIC ELECTRICITY
    PREN 13852 : DRAFT 2000 CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
    I.S. EN 50241-1:1999 SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - GENERAL REQUIREMENTS AND TEST METHODS
    BS EN 12012-2 : 2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    BS EN 12874:2001 FLAME ARRESTERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND LIMITS FOR USE
    EN 12874 : 2001 FLAME ARRESTERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND LIMITS FOR USE
    EN 50019:2000/corrigendum Apr. 2003 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E"
    EN 50303:2000 Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
    IEC 60079-1:2014 RLV Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
    ISO 2738:1999 Sintered metal materials, excluding hardmetals — Permeable sintered metal materials — Determination of density, oil content and open porosity
    IEC 60127:1974 Cartridge fuse-links for miniature fuses
    EN 50039 : 1980 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INTRINSICALLY SAFE ELECTRICAL SYSTEMS 'I'
    HD 214 : 200S2 RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS
    IEC 60662:2011 High-pressure sodium vapour lamps - Performance specifications
    EN 60623:2017 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - VENTED NICKEL-CADMIUM PRISMATIC RECHARGEABLE SINGLE CELLS
    EN 50020:2002 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INTRINSIC SAFETY 'I'
    ISO 4003:1977 Permeable sintered metal materials — Determination of bubble test pore size
    IEC 60061-2:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
    EN 60285:1994/A2:1999 ALKALINE SECONDARY CELLS AND BATTERIES - SEALED NICKEL-CADMIUM CYLINDRICAL RECHARGEABLE SINGLE CELLS
    EN 50019:2000/corrigendum Apr. 2003 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E"
    ISO 31-0:1992 Quantities and units Part 0: General principles
    ISO 4022:1987 Permeable sintered metal materials — Determination of fluid permeability
    ISO 1210:1992 Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    ISO 468:1982 Surface roughness — Parameters, their values and general rules for specifying requirements
    EN 60086-1:2015 PRIMARY BATTERIES - PART 1: GENERAL (IEC 60086-1:2015)
    IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
    IEC 60061-1:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
    IEC 60086-1:2015 Primary batteries - Part 1: General
    EN 954-1 : 1996 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
    ISO 185:2005 Grey cast irons Classification
    ISO 965-1:2013 ISO general purpose metric screw threads Tolerances Part 1: Principles and basic data
    EN 60662:2012 HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60662:2011, MODIFIED)
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    ISO 965-3:1998 ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads
    IEC 60623:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells
    IEC 61150:1992 Alkaline secondary cells and batteries - Sealed nickel-cadmium rechargeable monobloc batteries in button cell design
    EN 50014:1997/A2:1999 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
    IEC 60285:1993+AMD1:1995+AMD2:1998 CSV Alkaline secondary cells and batteries - Sealed nickel-cadmium cylindrical rechargeable single cells
    EN 61150 : 1993 ALKALINE SECONDARY CELLS AND BATTERIES - SEALED NICKEL CADMIUM RECHARGEABLE MONOBLOC BATTERIES IN BUTTON CELL DESIGN
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective