EN 60079-1:2014

Current

Current The latest, up-to-date edition.

Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

Available format(s):

Language(s):

Published date: 10-10-2014

Publisher: European Committee for Standards - Electrical

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Level of protection (equipment
   protection level, EPL)
5 Flameproof joints
6 Sealed joints
7 Operating rods
8 Supplementary requirements for shafts and bearings
9 Light-transmitting parts
10 Breathing and draining devices which form part
   of a flameproof enclosure
11 Fasteners and openings
12 Materials
13 Entries for flameproof enclosures
14 Verification and tests
15 Type tests
16 Routine tests
17 Switchgear for Group I
18 Lampholders and Iamp caps
19 Non-metallic enclosures and non-metallic
   parts of enclosures
20 Marking
21 Instructions
Annex A (normative) - Additional requirements for crimped
        ribbon elements and multiple screen elements of breathing
        and draining devices
Annex B (normative) - Additional requirements for elements,
        with non-measurable paths of breathing and draining devices
Annex C (normative) - Additional requirements for flameproof entry
        devices
Annex D (normative) - Empty flameproof enclosures as Ex components
Annex E (normative) - Cells and batteries used in flameproof 'd'
        enclosures
Annex F (informative) - Mechanical properties for screws and nuts
Annex G (normative) - Additional requirements for flameproof
        enclosures
        with an internal source of release (containment system)
Annex H (normative) - Requirements for machines with flameproof 'd'
        enclosures fed from converters
Bibliography
Annex ZA (normative) - Normative references to international
         publications with their corresponding European
         publications
Annex ZY (informative) - Significant changes between this European
         Standard and EN 60079-1:2007
Annex ZZ (informative) - Coverage of Essential Requirements of
         EC Directives

Abstract - (Show below) - (Hide below)

IEC 60079-1: 2014 contains specific requirements for the construction and testing of electrical equipment with the type of protection flameproof enclosure "d", intended for use in explosive gas atmospheres. This standard supplements and modifies the general requirements of IEC 60079-0. Where a requirement of this standard conflicts with a requirement of IEC 60079-0, the requirement of this standard will take precedence. This seventh edition cancels and replaces the sixth edition, published in 2007, and constitutes a technical revision. The numerous changes are identified in the Foreward of the document.Keywords: flameproof enclosure "d", explosive gas atmospheres

General Product Information - (Show below) - (Hide below)

Committee	CLC/TC 31
Development Note	Supersedes EN 50018. (04/2004)
Document Type	Standard
ISBN
Pages
Published
Publisher	European Committee for Standards - Electrical
Status	Current
Supersedes	EN 50018 : 2000 AMD 1 2002

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DIN EN 60079-17 : 2014	Identical
SS-EN 60079-1:2014	Identical
BS EN 60079-1:2014	Identical
NEN EN IEC 60079-1 : 2014	Identical
NBN EN 60079-1 : 2014	Identical
I.S. EN 60079-1:2014&AC:2018-09	Identical
PN EN 60079-1 : 2014	Identical
I.S. EN 60079-1:2014	Identical
DIN EN 60079-1 : 2015-04	Identical
VDE 0170-5 : 2015-04	Identical
CEI EN 60079-1 : 2016	Identical
SN EN 60079-1:2014	Identical
IEC 60079-1:2014 RLV	Identical
NF EN 60079-1 : 2015	Identical
DS EN 60079-1 : 2014	Identical
BS EN 60811-501:2012+A1:2018	Identical
UNE-EN 60079-1:2015	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

UNE-EN 60079-17:2014	Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
BS EN 60079-32-2:2015	Explosive atmospheres Electrostatics hazards. Tests
BS EN 60079-7 : 2015	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015)
CEN/TR 16787:2014	Industrial Gas Installation - Guideline
UNI EN 1474-1 : 2009	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
I.S. EN 60079-35-1:2011	EXPLOSIVE ATMOSPHERES - PART 35-1: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
PREN 1127-1 : DRAFT 2017	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
UNE-EN 50194-2:2007	Electrical apparatus for the detection of combustible gases in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requirements
12/30262935 DC : 0	BS EN 15339-4 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 4: GAS AND LIQUID FUEL SUPPLY
09/30198043 DC : 0	BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
UNI EN 13237 : 2012	POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
13/30273033 DC : 0	BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
UNE-EN 60079-26:2015	Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
I.S. EN 60079-0:2012	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD))
I.S. EN 15967:2011	DETERMINATION OF MAXIMUM EXPLOSION PRESSURE AND THE MAXIMUM RATE OF PRESSURE RISE OF GASES AND VAPOURS
10/30227671 DC : 0	BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
CEN/TR 15339-4:2014	Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply
BS EN 62013-1:2006	Caplights for use in mines susceptible to firedamp General requirements. Construction and testing in relation to the risk of explosion
EN 15339-2:2007	Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units
I.S. EN 1012-3:2013	COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
BS EN 60079-19 : 2011	EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION
S.R. CEN/TR 15339-4:2014	THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 4: GAS AND LIQUID FUEL SUPPLY
18/30369304 DC : DRAFT APR 2018	BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 60079-15:2010	EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
I.S. EN 1474-1:2008	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
S.R. CEN/TR 16787:2014	INDUSTRIAL GAS INSTALLATION - GUIDELINE
I.S. EN 15714-2:2009	INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
UNI EN 15967 : 2011	DETERMINATION OF MAXIMUM EXPLOSION PRESSURE AND THE MAXIMUM RATE OF PRESSURE RISE OF GASES AND VAPOURS
17/30365866 DC : 0	BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
EN 60079-19:2011/A1:2015	EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION (IEC 60079-19:2010)
EN IEC 60079-7:2015/A1:2018	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015/A1:2017)
DIN EN 1473:2016-10	Installation and equipment for liquefied natural gas - Design of onshore installations
BS EN 13463-1:2009	Non-electrical equipment for use in potentially explosive atmospheres Basic method and requirements
UNE-EN 1127-1:2012	Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
BS EN 60079-18 : 2015	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
BS EN 13463-3:2005	Non-electrical equipment for use in potentially explosive atmospheres Protection by flameproof enclosure \'d\'
DIN EN 1127-2:2002-07	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
I.S. EN 12921-1:2005	MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
EN 60079-26:2015	Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
EN 12753:2005+A1:2010	Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
EN 62013-1:2006	Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion
DIN EN 13922:2011-11	TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
EN 13463-1:2009	Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
DIN EN 12312-5:2009-08	Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (includes Amendment A1:2009)
EN 1010-1:2004+A1:2010	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
EN 13237:2012	Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
EN 13463-3:2005	Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd'
EN 12621:2006+A1:2010	Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN 60079-28:2015	Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
EN 60079-32-2:2015	Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
EN 12921-1:2005+A1:2010	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
EN 12215:2004+A1:2009	Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
EN 12757-1:2005+A1:2010	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
BS EN 16299:2013	Cathodic protection of external surfaces of above ground storage tankbases in contact with soil or foundations
BS EN 60079-26:2015	Explosive atmospheres Equipment with Equipment Protection Level (EPL) Ga
PREN 12405-1 : DRAFT 2017	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
11/30248021 DC : 0	AEROSPACE SERIES - COPPER ALLOY CUBE 1.9 - SOLUTION TREATED, COLD WORKED TO [1/2] HARD AND PRECIPITATION TREATED - BAR - 5 MM <= A OR D <= 190 MM - R[M] >= 1220 MPA
CEN/TR 15339-6:2014	Thermal spraying - Safety requirements for thermal spraying equipment - Part 6: Spray booth, Handling system, Dust collection, Exhaust system, Filter
BS EN 15714-2:2009	Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements
11/30235009 DC : 0	BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
13/30286132 DC : 0	BS EN 13616-2 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT CLOSURE DEVICE
12/30270980 DC : 0	BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
05/30127970 DC : DRAFT JAN 2005	EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
I.S. EN 60079-28:2015	EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
UNE-EN 12405-1:2006	Gas meters - Conversion devices - Part 1: Volume conversion
PREN 14986 : DRAFT 2014	DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
I.S. EN 50194-2:2006	ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS
UNE-EN 60079-29-1:2017	Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
I.S. EN 62013-1:2006	CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
UNI EN 12405-1 : 2010	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
I.S. EN 50050:2006	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT
BS EN 50194-2 : 2006	ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS
I.S. EN 13616-1:2016	OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
16/30341165 DC : 0	BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
BS EN 1127-1:2011	Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
CEI EN 60079-15 : 2012	EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
NF EN 1127-1 : 2011	EXPLOSIVES ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
IEC TR 61831:2011	On-line analyser systems - Guide to design and installation
I.S. EN 14492-2:2006	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN 1010-1:2011-06	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010)
DIN EN 12215:2010-06	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 12621:2011-07	Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
DIN EN 12581:2011-02	Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010)
DIN EN 12981:2010-06	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 13617-1:2012-08	Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
BS EN 12215 : 2004	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
BS EN 12981 : 2005	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 12757-1 : 2005	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
BS EN 1473:2016	Installation and equipment for liquefied natural gas. Design of onshore installations
I.S. EN 12215:2004	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
I.S. EN 14678-1:2013	LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
DIN EN 1473:1997-11	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 13237:2012	POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
I.S. EN 12757-1:2005	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
I.S. EN 14492-1:2006	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
DIN EN 1127-1:2011-10	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
DIN EN 14492-1:2010-06	Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009)
DIN EN 13673-2:2005-12	DETERMINATION OF MAXIMUM EXPLOSION PRESSURE AND THE MAXIMUM RATE OF PRESSURE RISE OF GASES AND VAPOURS - PART 2: DETERMINATION OF THE MAXIMUM RATE OF EXPLOSION PRESSURE RISE
I.S. EN 1127-2:2014	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
I.S. EN 13852-1:2013	CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES
I.S. EN 12921-3:2005	MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
I.S. EN 12621:2006	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
DIN EN 13463-1:2009-07	NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
DIN EN 13852-2:2005-03	Cranes - Offshore cranes - Part 2: Floating cranes
I.S. EN 12981:2005	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 12312-5:2005	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
EN 12312-5:2005+A1:2009	Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment
I.S. EN 1473:2016	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 13617-1:2012	PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
EN 60079-14:2014/AC:2016	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
EN 60079-15:2010	Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
I.S. EN 1010-1:2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 15339-2:2007-06	Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units
I.S. EN 12753:2005	THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 14986:2017	DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
I.S. EN 12581:2006	COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
VDI/VDE 3518 Blatt 1:2011-05	Multigas sensors - Terms, configuration, function and classification
UNE-EN 13616-1:2016	Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
BS EN 15967:2011	Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
12/30262932 DC : 0	BS EN 15339-3 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 3: TORCHES FOR THERMAL SPRAYING AND THEIR CONNECTION AND SUPPLY UNITS
DIN EN 1474-1:2009-03	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
I.S. EN 13463-1:2009	NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
13/30257895 DC : 0	BS EN 1755 - SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST
PREN 1473 : DRAFT 2018	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
PREN 13617-1 : DRAFT 2010	PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
I.S. EN 13673-2:2005	DETERMINATION OF MAXIMUM EXPLOSION PRESSURE AND THE MAXIMUM RATE OF PRESSURE RISE OF GASES AND VAPOURS - PART 2: DETERMINATION OF THE MAXIMUM RATE OF EXPLOSION PRESSURE RISE
PD IEC/TR 61831:2011	On-line analyser systems. Guide to design and installation
PREN 14492-1 : DRAFT 2015	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
10/30219405 DC : 0	BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
BS EN 60079-17:2014	Explosive atmospheres Electrical installations inspection and maintenance
EN 1473:2016	Installation and equipment for liquefied natural gas - Design of onshore installations
09/30202029 DC : 0	BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
CEI EN 60079-17 : 2015	EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
09/30209043 DC : 0	BS EN 13922 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
PD CEN/TR 16787:2014	Industrial Gas Installation. Guideline
I.S. EN 60079-14:2014	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
BS EN 1012-3:2013	Compressors and vacuum pumps. Safety requirements Process compressors
14/30294092 DC : 0	BS EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 15967:2011-10	Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
I.S. EN 16299:2013	CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
I.S. EN 60079-7:2015	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
I.S. EN 15339-2:2007	THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS
I.S. EN 60079-17:2014	EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
BS EN 60079-29-1:2007	Explosive atmospheres Gas detectors. Performance requirements of detectors for flammable gases
I.S. EN 12405-1:2005	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
BS EN 60079-15:2010	Explosive atmospheres Equipment protection by type of protection \'n\'
UNI EN 16299 : 2013	CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
EN 12405-1:2005+A2:2010	Gas meters - Conversion devices - Part 1: Volume conversion
DIN EN 12921-1:2011-02	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010)
I.S. EN 1127-1:2011	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
DIN EN 1710:2008-08	EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
DIN EN 13463-3:2005-07	NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 3: PROTECTION BY FLAMEPROOF ENCLOSURE 'D'
DIN EN 1127-2:2014-09	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
DIN EN 12312-5 E : 2009	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
UNE-EN 60079-14:2016	Explosive atmospheres - Part 14: Electrical installations design, selection and erection
BS EN 12921-3 : 2005	MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
BS EN 12312-5 : 2005	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
UNE-EN 14678-1:2013	LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
I.S. EN 13922:2011	TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
BS EN 12753 : 2005	THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
BS EN 60079-14:2014	Explosive atmospheres Electrical installations design, selection and erection
I.S. EN 13463-3:2005	NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 3: PROTECTION BY FLAMEPROOF ENCLOSURE 'D'
EN 1474-1:2008	Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
EN 16299:2013	Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
EN 14678-1:2013	LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
UNI EN 13617-1 : 2012	PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
UNI EN 12921-1 : 2010	MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN 12581 : 2010	COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 1010-1 : 2011	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
UNI EN 13463-1 : 2009	NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
UNI EN 12981 : 2009	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 1012-3 : 2014	COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
UNI EN 12757-1 : 2010	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
UNI EN 1127-2 : 2014	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
UNI EN 12753 : 2010	THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 13852-1 : 2013	CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
UNI EN 1710 : 2008	EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
UNI EN 14678-1 : 2013	LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
UNI EN 12921-3 : 2009	MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
UNI EN 12621 : 2010	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNI EN 12215 : 2010	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
UNI EN 14492-1 : 2009	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
UNI EN 14492-2 : 2009	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN 15714-2:2009	Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
PREN 14678-1 : DRAFT 2010	LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
UNI EN 15714-2 : 2009	INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
13/30286135 DC : 0	BS EN 13616-1 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
PREN 1755 : DRAFT 2013	SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST
BS EN 1474-1:2008	Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms
BS EN 13616-1:2016	Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices with closure device
BS EN 60079-2:2014	Explosive atmospheres Equipment protection by pressurized enclosure \'p\'
BS EN 61010-2-042:1997	Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes
UNE-EN 16299:2013	Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
I.S. EN 14460:2018	EXPLOSION RESISTANT EQUIPMENT
EN 14460:2018	Explosion resistant equipment
PREN 13852-1 : DRAFT 2011	CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
BS EN 1127-1:2019	Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
S.R. CEN/TR 15339-6:2014	THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 6: SPRAY BOOTH, HANDLING SYSTEM, DUST COLLECTION, EXHAUST SYSTEM, FILTER
DIN EN 12753:2011-02	Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010)
DIN EN 12757-1:2011-02	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
EN 13922:2011	Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels
DIN EN 14583 E : 2004	WORKPLACE ATMOSPHERES - VOLUMETRIC BIOAEROSOL SAMPLING DEVICES - REQUIREMENTS AND TEST METHODS
DIN EN 13852-1:2014-01	Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
BS EN 50628:2016	Erection of electrical installations in underground mines
UNE-EN 12621:2006	Machinery for the supply and circulation of coating materials under pressure - Safety requirements
BS EN 1010-1 : 2004	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
BS EN 14986:2007	Design of fans working in potentially explosive atmospheres
BS EN 13617-1:2012	Petrol filling stations Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
BS EN 13673-2:2005	Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours Determination of the maximum rate of explosion pressure rise
BS EN 12621 : 2006	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
BS EN 15339-2:2007	Thermal spraying. Safety requirements for thermal spraying equipment Gas control units
UNE-EN 60079-0:2013	Explosive atmospheres - Part 0: Equipment - General requirements
BS EN 60079-35-1:2011	Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
UNE-EN 14986:2017	Design of fans working in potentially explosive atmospheres
BS EN 13237:2012	Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
BS EN 1127-2:2014	Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology for mining
BS EN 14492-1 : 2006	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
UNE-EN 13617-1:2012	Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
BS EN 1710 : 2005	EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
BS EN 13922:2011	Tanks for transport of dangerous goods. Service equipment for tanks. Overfill prevention systems for liquid fuels
UNE-EN 13463-1:2011	Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
UNE-EN 60079-2:2015	Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
UNE-EN 13922:2012	Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels
UNE-EN 60079-35-1:2012	Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion
UNE-EN 13852-1:2014	Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
EN 14986:2017	Design of fans working in potentially explosive atmospheres
EN 1710:2005+A1:2008/AC:2010	EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
EI MODEL CODE SAFE PRACTICE PT1 : 2010	THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS
EN 13673-2:2005	Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise
EN 12581:2005+A1:2010	Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements
EN 13616-1:2016	Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
EN 14492-1:2006+A1:2009/AC:2010	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
EN 13852-1:2013	Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
EN 14492-2:2006+A1:2009/AC:2010	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN 13852-2:2004	Cranes - Offshore cranes - Part 2: Floating cranes
UNE-EN 60079-15:2013	Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
UNE-EN 60079-28:2016	Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
10/30214970 DC : 0	BS EN 13616 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
PD CEN/TR 15339-4:2014	Thermal spraying. Safety requirements for thermal spraying equipment Gas and liquid fuel supply
PD CEN/TR 15339-6:2014	Thermal spraying. Safety requirements for thermal spraying equipment Spray booth, Handling system, Dust collection, Exhaust system, Filter
07/30160767 DC : 0	BS EN 13463-1 - NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
NF EN 12405-1 : 2005 + A2 2010	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
08/30186475 DC : 0	BS EN 13617-1 AMD1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
05/30135286 DC : 0	EN 15268 - PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND PERFORMANCE OF SUBMERSIBLE PUMP ASSEMBLIES
14/30297213 DC : 0	BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
BS EN 60079-28:2015	Explosive atmospheres Protection of equipment and transmission systems using optical radiation
I.S. EN 50628:2016	ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
UNE-EN 15714-2:2010	Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
DIN EN 15714-2:2010-02	Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
UNI EN 1127-1 : 2011	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
I.S. EN 60079-26:2015	EXPLOSIVE ATMOSPHERES - PART 26: EQUIPMENT WITH EQUIPMENT PROTECTION LEVEL (EPL) GA
BS EN 12405-1 : 2005	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
EN 60079-18:2015/A1:2017	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' (IEC 60079-18:2014/A1:2017)
PREN 1127-2 : DRAFT 2012	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
BS EN 60079-0 : 2012	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
UNE-EN 60079-19:2011	Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
17/30356731 DC : 0	BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
CEI EN 60079-28 : 2016	EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
UNE-EN 60079-7:2016	Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
EN 13617-1:2012	Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
NF EN 12312-5 : 2005 + A1 2010	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
DIN EN 14678-1:2013-06	LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
DIN EN 12405-1:2011-04	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
DIN EN 13237:2013-01	POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 14492-2:2016-08 (Draft)	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN 12921-3:2010-02	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids (includes Amendment A1:2008)
DIN EN 14492-1:2015-05 (Draft)	Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015
BS EN 13852-2:2004	Cranes. Offshore cranes Floating cranes
BS EN 12581 : 2005	COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 14583:2004	Workplace atmospheres. Volumetric bioaerosol sampling devices. Requirements and test methods
BS EN 14678-1:2013	LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers
BS EN 13852-1:2013	Cranes. Offshore cranes General-purpose offshore cranes
BS EN 14492-2 : 2006	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
BS EN 12921-1 : 2005	MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
EN 60079-2:2014/AC:2015	EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014)
EN 1012-3:2013	Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
EN 60079-0:2012/A11:2013	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
DIN EN 14492-2:2010-05	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN 1127-2:2014	Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
EN 12921-3:2005+A1:2008	Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids
EN 12981:2005+A1:2009	Coating plants - Spray booths for application of organic powder coating material - Safety requirements
EN 60079-17:2014	Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
DIN EN 14583:2004-12	Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods
EN 1127-1:2011	Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
I.S. EN 14583:2004	WORKPLACE ATMOSPHERES - VOLUMETRIC BIOAEROSOL SAMPLING DEVICES - REQUIREMENTS AND TEST METHODS
EN 50628:2016	Erection of electrical installations in underground mines
DIN EN 16299:2013-06	CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
EN 50194-2 : 2006 AMD 1 2016	ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS
EN 60079-35-1:2011/AC:2011	EXPLOSIVE ATMOSPHERES - PART 35-1: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
EN 14583:2004	Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods
UNE-EN 12757-1:2006+A1:2010	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
UNE-EN 12757-1:2006	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60112:2003+AMD1:2009 CSV	Method for the determination of the proof and the comparative tracking indices of solid insulating materials
ISO 2738:1999	Sintered metal materials, excluding hardmetals — Permeable sintered metal materials — Determination of density, oil content and open porosity
IEC 61960:2011	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications
EN 60079-0:2012/A11:2013	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
EN 60079-15:2010	Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
ISO 4003:1977	Permeable sintered metal materials — Determination of bubble test pore size
IEC 60079-20-1:2010	Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
EN ISO 4022:2006	Permeable sintered metal materials - Determination of fluid permeability (ISO 4022:1987)
IEC 60050-426:2008	International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
EN 60079-11:2012	Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-11:2011	Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
ASME B1.20.1 : 2013(R2018)	PIPE THREADS, GENERAL PURPOSE (INCH)
IEC 61951-2:2017	Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride
ISO 4022:1987	Permeable sintered metal materials — Determination of fluid permeability
IEC 61951-1:2017	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-Cadmium
ISO 468:1982	Surface roughness — Parameters, their values and general rules for specifying requirements
UL 1203:5ED 2013-11	ExplosionProof and Dust-IgnitionProof Electrical Equipment for Use in Hazardous (Classified) Locations
IEC 60079-0:2011	Explosive atmospheres - Part 0: Equipment - General requirements
ISO 80000-1:2009	Quantities and units — Part 1: General
IEC 60034-1:2017	Rotating electrical machines - Part 1: Rating and performance
IEC 60086-1:2015	Primary batteries - Part 1: General
IEC 60079-14:2013	Explosive atmospheres - Part 14: Electrical installations design, selection and erection
ISO 185:2005	Grey cast irons Classification
ISO 965-1:2013	ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
EN 24003:1993	Permeable sintered metal materials - Determination of bubble test pore size (ISO 4003:1977)
ISO 965-3:1998	ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads
IEC 60623:2017	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells
IEC 60079-15:2010	Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN ISO 2738:1999	Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999)
IEC 60622:2002	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart