EN 50064 : 1989 COR 2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
28-01-2022
12-01-2013
Foreword
1 Introduction
2 Scope and field of application
3 Definitions
4 Materials
5 Design
6 Manufacture and workmanship
7 Inspection and testing
8 Pressure relief devices
9 Certification and marking
Annex A (normative) - Elastic analysis of the
stress distribution in dished
ends due to internal pressure
Annex B (normative) - Welding procedure and welder
performance tests
Annex C (normative) - Sample of record form
Annex D (informative) - National deviations
Applies to fusion welded wrought aluminium and aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor or outdoor installations of high-voltage switchgear and controlgear, where the gas is used principally for its dielectric and/or arc quenching properties, with rated voltages.
| Committee |
TC 17 C
|
| DevelopmentNote |
Also numbered as BS 7315(1990) (09/2005)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PN EN 50064 : 2002 | Identical |
| CEI EN 50064 : 1998 | Identical |
| I.S. EN 50064:1991 | Identical |
| UNE-EN 50064:1993 | Identical |
| NEN EN 50064 : 1991 AMD 1 1994 | Identical |
| NF EN 50064 : 90 AMD 1 93 | Identical |
| DIN VDE 0670-803 : 1991 | Identical |
| SN EN 50064 : 1989 AMD 1/CORR 07 | Identical |
| AS EN 50064-2008 | Identical |
| VDE 0670-803 : 1991 AMD 1 COR 1 | Identical |
| CSA C50064 : 1999 : INC : UPD 1 : 1999 : R2012 | Similar to |
| DIN EN 50064 : AMD 1 COR 1 2008 | Identical |
| CSA C50064 : 1999 : R2007 | Similar to |
| CAN/CSA-C50064-99 (R2016) | Similar to |
| BS EN 62271-203:2012 | High-voltage switchgear and controlgear Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
| IEEE C37.122.1-2014 | IEEE Guide for Gas-Insulated Substations Rated Above 52 kV |
| BS EN 50069 : 1991 | SPECIFICATION FOR WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| UNE-EN 62271-203:2013 | High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
| EN 50052:2016 | High-voltage switchgear and controlgear - Gas-filled cast aluminium alloy enclosures |
| BS EN 50052:2016 | High-voltage switchgear and controlgear. Gas-filled cast aluminium alloy enclosures |
| I.S. EN 50052:2016 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED CAST ALUMINIUM ALLOY ENCLOSURES |
| CEI EN 50052 : 1998 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED CAST ALUMINIUM ALLOY ENCLOSURES |
| 08/30179468 DC : DRAFT MAR 2008 | BS EN 62271-203 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV |
| IEEE C57.13.5-2009 | IEEE Standard of Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above |
| EN 50069:1991/corrigendum Aug. 2007 | WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| UNE-EN 50052:2017 | High-voltage switchgear and controlgear - Gas-filled cast aluminium alloy enclosures |
| IEC 62271-203:2011 | High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
| BS EN 50089:1992 | Specification for cast resin partitions for metal-enclosed gas-filled high-voltage switchgear and controlgear |
| CEI EN 62271-203 : 2013 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV |
| CEI EN 50187 : 1998 | GAS-FILLED COMPARTMENTS FOR A.C. SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV |
| I.S. EN 62271-203:2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV (IEC 62271-203:2011 (EQV)) |
| EN 50187 : 96 AC 96 | GAS-FILLED COMPARTMENTS FOR A.C. SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV |
| EN 62271-203:2012 | High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
| ISO 3134-1:1985 | Light metals and their alloys — Terms and definitions — Part 1: Materials |
| ISO 6213:1989 | Welding Factors to be considered to ensure quality in welded structures |
| ISO/R 373:1964 | General principles for fatigue testing of metals |
| ISO 3134-3:1985 | Light metals and their alloys — Terms and definitions — Part 3: Wrought products |
| IEC 60517:1990 | Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above |
| BS 5750-0.1(1987) : 1987 | QUALITY SYSTEMS - PRINCIPAL CONCEPTS AND APPLICATIONS - GUIDE TO SELECTION AND USE |
| HD 358 : 200S3 | GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES OF 72.5 kV AND ABOVE |
| BS 7501:1989 | General criteria for the operation of testing laboratories |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO/IEC Guide 2:2004 | Standardization and related activities — General vocabulary |
| ISO 3134-5:1981 | Light metals and their alloys — Terms and definitions — Part 5: Methods of processing and treatment |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.