EN 50290-1-2:2004
Current
Current
The latest, up-to-date edition.
Communication cables - Part 1-2: Definitions
Published date
30-11-2004
Sorry this product is not available in your region.
1 Scope
2 Normative references
3 Definitions
This Part 1-2 of the European Standard EN 50290 gives the terms and definitions for the design, the construction, the tests and the installation of symmetrical, coaxial and optical fibre cables used for the infrastructure of communication and control networks.These definitions apply for the European Standard series EN 50290 and EN 50289 and all the relevant cable specifications.
| Committee |
CLC/TC 46X
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| PN EN 50290-1-2 : 2005 | Identical |
| SN EN 50290-1-2 : 2004 | Identical |
| BS EN 50290-1-2:2004 | Identical |
| CEI EN 50290-1-2 : 2005 | Identical |
| I.S. EN 50290-1-2:2004 | Identical |
| UNE-EN 50290-1-2:2010 | Identical |
| NF EN 50290-1-2 : 2005 | Identical |
| NBN EN 50290 1-2 : 2006 | Identical |
| NEN EN 50290-1-2 : 2004 | Identical |
| DIN EN 50290-1-2:2005-10 | Identical |
| UNE-EN 50290-1-2:2004 | Identical |
| BS EN 50289-4-2:2001 | Communication cables. Specifications for test methods. Environmental test methods Water penetration |
| UNE-EN 50289-1-8:2017 | Communication cables - Specifications for test methods - Part 1-8: Electrical test methods - Attenuation |
| BS EN 50289-1-5:2001 | Communication cables. Specifications for test methods. Electrical test methods Capacitance - SEC5 : Capacitance |
| BS EN 50288-8:2012 | Multi-element metallic cables used in analogue and digital communication and control Specification for type 1 cables characterised up to 2 MHz |
| 15/30332390 DC : 0 | BS EN 50117-10-1 - COAXIAL CABLES - PART 10-1: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR ANALOQUE AND DIGITAL SIGNAL TRANSMISSION - OUTDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
| BS EN 50289-1-4:2001 | Communication cables. Specifications for test methods. Electrical test methods Insulation resistance |
| 15/30332399 DC : 0 | BS EN 50117-11-2 - COAXIAL CABLES - PART 11-2: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR ANALOGUE AND DIGITAL SIGNAL TRANSMISSION - DISTRIBUTION AND TRUNK CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 2000 MHZ |
| CEI EN 50289-3-10 : 2005 | COMMUNICATION CABLES - SPECIFICATIONS FOR TESTS METHODS - PART 3-10: MECHANICAL TEST METHODS - TORSION AND TWISTING |
| 16/30342122 DC : 0 | BS EN 50289-1-8 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-8: ELECTRICAL TEST METHODS - ATTENUATION |
| BS EN 50289-1-7:2001 | Communication cables. Specifications for test methods. Electrical test methods Velocity of propagation - sec7 : Velocity of propagation |
| CEI EN 50117-3-1 : 2002 | COAXIAL CABLES - PART 3-1: SECTIONAL SPECIFICATIONS FOR CABLES USED IN TELECOM APPLICATIONS - MINIATURIZED CABLES USED IN DIGITAL COMMUNICATION SYSTEMS |
| BS EN 50289-1-15:2004 | Communication cables. Specifications for test methods Electromagnetic performance - Coupling attenuation of links and channels (laboratory conditions) |
| BS EN 50289-1-16:2007 | Communication cables. Specifications for test methods Electromagnetic performance. Coupling attenuation of cable assemblies (field conditions) |
| BS EN 50289-1-8:2017 | Communication cables. Specifications for test methods Electrical test methods. Attenuation |
| 04/30117153 DC : DRAFT JUL 2004 | EN 50117-2-1 - COAXIAL CABLES - PART 2-1: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1 000 MHZ |
| 06/30157655 DC : 0 | BS EN 50289-4-4 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-4: ENVIRONMENTAL TEST METHODS - RESISTANCE TO SOLVENTS AND CONTAMINATING FLUIDS |
| UNE-EN 50290-2-1:2010 | Communication cables -- Part 2-1: Common design rules and construction |
| 07/30169496 DC : 0 | EN 50117-4-1 - COAXIAL CABLES - PART 4-1: SECTIONAL SPECIFICATION FOR CABLES FOR BCT CABLING IN ACCORDANCE WITH EN 50173 - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MHZ |
| 03/306557 DC : DRAFT MAY 2003 | EN 50289-1-15 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-15: ELECTROMAGNETIC PERFORMANCE - COUPLING ATTENUATION OF CABLE ASSEMBLIES (LABORATORY CONDITIONS) |
| BS EN 50289-3-7:2001 | Communication cables. Specifications for test methods. Mechanical test methods Abrasion resistance of the cable sheath |
| BS EN 50289-3-16:2001 | Communication cables. Specifications for test methods. Mechanical test methods Cable tensile performance |
| 02/210608 DC : DRAFT OCT 2002 | EN 50117-2-5:2002 - COAXIAL CABLES - PART 2-5: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - OUTDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MHZ |
| CEI EN 50288-1 : 2014 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| BS EN 50290-1-1:2001 | Communication cables. General |
| 00/245926 DC : DRAFT NOV 2000 | PREN 50289-4-6 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-6: ENVIRONMENTAL TEST METHODS - TEMPERATURE CYCLING |
| BS EN 50289-1-9:2017 | Communication cables. Specifications for test methods Electrical test methods. Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL) |
| I.S. EN 50289-3-17:2002 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 3-17: MECHANICAL TEST METHODS - ADHESION OF DIELECTRIC AND SHEATH |
| PREN 50289-3-8 : DRAFT 2013 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 3-8: MECHANICAL TEST METHODS - ABRASION RESISTANCE OF CABLE SHEATH MARKINGS |
| I.S. EN 50117-4-2:2015 | COAXIAL CABLES - PART 4-2: SECTIONAL SPECIFICATION FOR CATV CABLES UP TO 6 GHZ USED IN CABLED DISTRIBUTION NETWORKS |
| I.S. EN 50289-1-13:2004 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-13: ELECTRICAL TEST METHODS - COUPLING ATTENUATION OR SCREENING ATTENUATION OF PATCH CORDS/COAXIAL CABLE ASSEMBLIES/PRE-CONNECTORISED CABLES |
| CEI EN 50289-3-11 : 2002 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 3-11: MECHANICAL TEST METHODS - CABLE CUT-THROUGH RESISTANCE |
| I.S. EN 50117-1:2002 | COAXIAL CABLES - PART 1: GENERIC SPECIFICATION |
| I.S. EN 50289-1-11:2016 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-11: ELECTRICAL TEST METHODS - CHARACTERISTIC IMPEDANCE, INPUT IMPEDANCE, RETURN LOSS |
| I.S. EN 50117-2-3:2004 | COAXIAL CABLES - PART 2-3: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - DISTRIBUTION AND TRUNK CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
| I.S. EN 50288-8:2012 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 8: SPECIFICATION FOR TYPE 1 CABLES CHARACTERISED UP TO 2 MHZ |
| UNE-EN 50290-4-1:2016 | Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects |
| UNE-EN 50289-1-11:2017 | Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance, input impedance, return loss |
| EN 50290-1-1:2001 | Communication cables - Part 1-1: General |
| EN 50289-3-1:2001 | Communication cables - Specifications for test methods - Part 3-1: Mechanical test methods - General requirements |
| EN 50289-3-7:2001 | Communication cables - Specifications for test methods - Part 3-7: Mechanical test methods - Abrasion resistance of the cable sheath |
| EN 50289-1-17:2015 | Communication cables - Specifications for test methods - Part 1-17: Electrical test methods - Exogenous Crosstalk ExNEXT and ExFEXT |
| EN 50289-1-16:2007 | Communication cables - Specifications for test methods - Part 1-16: Electromagnetic performance - Coupling attenuation of cable assemblies (Field conditions) |
| EN 50289-3-12:2001 | Communication cables - Specifications for test methods - Part 3-12: Mechanical test methods - Shot gun damage |
| EN 50289-4-4:2008 | Communication cables - Specifications for test methods - Part 4-4: Environmental test methods - Resistance to solvents and contaminating fluids |
| EN 50289-4-14:2003 | Communication cables - Specifications for test methods - Part 4-14: Environmental test methods - Lightning |
| EN 50117-2-2:2004/A2:2013 | COAXIAL CABLES - PART 2-2: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - OUTDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
| EN 50289-1-11:2016 | Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance, input impedance, return loss |
| EN 50289-3-17:2002 | Communication cables - Specifications for test methods - Part 3-17: Mechanical test methods - Adhesion of dielectric and sheath |
| EN 50289-3-15:2003 | Communication cables - Specifications for test methods - Part 3-15: Mechanical test methods - Underwater cable resistance to hydrostatic pressure |
| EN 50117-4-1 : 2008 AMD 1 2013 | COAXIAL CABLES - PART 4-1: SECTIONAL SPECIFICATION FOR CABLES FOR BCT CABLING IN ACCORDANCE WITH EN 50173 - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MHZ |
| EN 50289-4-6:2001 | Communication cables - Specifications for test methods - Part 4-6: Environmental test methods - Temperature cycling |
| EN 50117-2-4 : 2004 AMD 2 2013 | COAXIAL CABLES - PART 2-4: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MHZ |
| CLC/TR 50117-8:2013 | Coaxial cables used in cabled distribution networks - Part 8: Repair and substitute of damaged buried cables |
| EN 50289-1-7:2001 | Communication cables - Specifications for test methods - Part 1-7: Electrical test methods - Velocity of propagation |
| EN 50289-1-5:2001 | Communication cables - Specifications for test methods - Part 1-5: Electrical test methods - Capacitance |
| EN 50289-3-9:2001 | Communication cables - Specifications for test methods - Part 3-9: Mechanical test methods - Bending tests |
| EN 50117-2-1:2005/A2:2013 | COAXIAL CABLES - PART 2-1: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
| EN 50289-4-1:2001 | Communication cables - Specifications for test methods - Part 4-1: Environmental test methods - General requirements |
| EN 50289-4-9:2001 | Communication cables - Specifications for test methods - Part 4-9: Environmental test methods - Pneumatic resistance |
| EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
| EN 50117-2-5:2004/A2:2013 | COAXIAL CABLES - PART 2-5: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - OUTDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MHZ |
| EN 50117-3-1:2002 | Coaxial cables - Part 3-1: Sectional specifications for cables used in Telecom applications - Miniaturized cables used in digital communication systems |
| EN 50289-1-2:2001 | Communication cables - Specifications for test methods - Part 1-2: Electrical test methods - DC resistance |
| 06/30157669 DC : 0 | BS EN 50289-4-7 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-7: ENVIRONMENTAL TEST METHODS - DAMP HEAT STEADY STATE |
| BS EN 50289-3-10:2004 | Communication cables. Specifications for tests methods Mechanical test methods. Torsion and twisting |
| PREN 50288-1 : DRAFT 2011 | MULTI-ELEMENT METALLIC CABLES USE IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| PREN 50289-1-8 : DRAFT 2016 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-8: ELECTRICAL TEST METHODS - ATTENUATION |
| BS EN 50289-4-7:2008 | Communication cables. Specifications for test methods Environmental test methods. Damp heat, steady state |
| 16/30342125 DC : 0 | BS EN 50289-1-9 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-9: ELECTRICAL TEST METHODS - UNBALANCE ATTENUATION (TRANSVERSE CONVERSION LOSS TCL TRANSVERSE CONVERSION TRANSFER LOSS TCTL) |
| BS EN 50289-1-12:2005 | Communication cables. Specifications for test methods Electrical test methods - Inductance |
| CEI EN 50289-1-7 : 2001 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-7: ELECTRICAL TEST METHODS - VELOCITY OF PROPAGATION |
| UNE-EN 50117-4-1:2010 | Coaxial cables - Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz |
| 04/30127050 DC : DRAFT DEC 2004 | EN 50289-1-16 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-16: ELECTROMAGNETIC PERFORMANCE - COUPLING ATTENUATION OF CABLE ASSEMBLIES (FIELD CONDITIONS) |
| BS EN 50289-3-15:2003 | Communication cables. Specifications for test methods. Mechanical test methods Underwater cable resistance to hydrostatic pressure |
| I.S. EN 50289-4-4:2008 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-4: ENVIRONMENTAL TEST METHODS - RESISTANCE TO SOLVENTS AND CONTAMINATING FLUIDS |
| BS EN 50289-3-12:2001 | Communication cables. Specifications for test methods. Mechanical test methods Shot gun damage |
| BS EN 50117-3-1:2002 | Miniaturized cables used in digital communication systemsCoaxial cables. Sectional specifications for cables used in telecom applications |
| BS EN 50289-3-8:2013 | Communication cables. Specifications for test methods Mechanical test methods. Abrasion resistance of cable sheath markings |
| 15/30332369 DC : 0 | BS EN 50117-9-1 - COAXIAL CABLES - PART 9-1: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR ANALOGUE AND DIGITAL SIGNAL TRANSMISSION - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
| I.S. EN 50117-2-1:2005 | COAXIAL CABLES - PART 2-1: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
| 03/306555 DC : DRAFT MAY 2003 | EN 50289-1-13 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-13: ELECTRICAL TEST METHODS - COUPLING ATTENUATION OR SCREENING ATTENUATION OF PATCH CORDS/COAXIAL CABLE ASSEMBLIES/PRE-CONNECTORISED CABLES |
| BS EN 50289-4-1:2001 | Communication cables. Specifications for test methods. Environmental test methods General requirements |
| BS EN 50289-3-13:2003 | Communication cables. Specifications for test methods. Mechanical test methods Aeolian vibration |
| UNE-EN 50117-4-2:2015 | Coaxial cables - Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cabled distribution networks |
| I.S. EN 50289-1-10:2002 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-10: ELECTRICAL TEST METHODS - CROSSTALK |
| CEI CLC/TR 50117-8 : 2014 | COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS - PART 8: REPAIR AND SUBSTITUTE OF DAMAGED BURIED CABLES |
| I.S. EN 50289-3-15:2003 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 3-15: MECHANICAL TEST METHODS - UNDERWATER CABLE RESISTANCE TO HYDROSTATIC PRESSURE |
| DIN EN 50289-1-9 : 2002 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-9: ELECTRICAL TEST METHODS - UNBALANCE ATTENUATION (TRANSVERSE CONVERSION LOSS TCL TRANSVERSE CONVERSION TRANSFER LOSS TCTL) |
| UNE-EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
| VDI 2441:2016-05 | Process gas and waste gas cleaning by cold plasma - Barrier discharge, corona discharge, UV radiation |
| VDE 0819-289-1-9 : 2018 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-9: ELECTRICAL TEST METHODS - UNBALANCE ATTENUATION (TRANSVERSE CONVERSION LOSS TCL TRANSVERSE CONVERSION TRANSFER LOSS TCTL) |
| 02/210606 DC : DRAFT OCT 2002 | PREN 50117-2-3 - COAXIAL CABLES - PART 2-3: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - DISTRIBUTION AND TRUNK CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
| 15/30332393 DC : 0 | BS EN 50117-10-2 - COAXIAL CABLES - PART 10-2: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR ANALOQUE AND DIGITAL SIGNAL TRANSMISSION - OUTDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MHZ |
| PREN 50290-4-1 : DRAFT 2013 | COMMUNICATION CABLES - PART 4-1: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - ENVIRONMENTAL CONDITIONS AND SAFETY ASPECTS |
| BS EN 50289-1-2:2001 | Communication cables. Specifications for test methods. Electrical test methods DC resistance - d.c.resistance |
| 15/30332396 DC : 0 | BS EN 50117-11-1 - COAXIAL CABLES - PART 11-1: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR ANALOQUE AND DIGITAL SIGNAL TRANSMISSION - DISTRIBUTION AND TRUNK CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
| PD CLC/TR 50117-8:2013 | Coaxial cables used in cabled distribution networks Repair and substitute of damaged buried cables |
| BS EN 50289-1-6:2002 | Communication cables. Specifications for test methods. Electrical test methods Electromagnetic performance |
| I.S. EN 50117-2-4:2004/A2:2013 | COAXIAL CABLES - PART 2-4: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MHZ |
| BS EN 50289-3-9:2001 | Communication cables. Specifications for test methods. Mechanical test methods Bending tests |
| BS EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control Generic specification |
| 02/209111 DC : DRAFT SEP 2002 | PREN 50288-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| BS EN 50117-2-1 : 2005 | COAXIAL CABLES - PART 2-1: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MZ |
| BS EN 50289-1-13:2004 | Communication cables. Specifications for test methods Electrical test methods - Coupling attenuation or screening attenuation of patch cords/coaxial cable assemblies/pre-connectorised cables |
| BS EN 50289-3-17:2002 | Communication cables. Specifications for test methods. Mechanical test methods Adhesion of dielectric and sheath |
| BS EN 50289-4-5:2008 | Communication cables. Specifications for test methods Environmental test methods. Climatic sequence |
| BS EN 50289-4-14:2003 | Communication cables. Specifications for test methods. Environmental test methods Lightning |
| 04/30112181 DC : DRAFT APR 2004 | EN 50289-1-12 - COMMUNICATION CABLES - SPECIFICATIONS FOR TESTS METHODS - PART 1-12: ELECTRICAL TEST METHODS - INDUCTANCE |
| BS EN 50117-1 : 2002 | COAXIAL CABLES - PART 1: GENERIC SPECIFICATION |
| 15/30332386 DC : 0 | BS EN 50117-9-3 - COAXIAL CABLES - PART 9-3: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR ANALOGUE AND DIGITAL SIGNAL TRANSMISSION - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 6000 MHZ |
| UNE-EN 50289-1-17:2016 | Communication cables - Specifications for test methods - Part 1-17: Electrical test methods - Exogenous Crosstalk ExNEXT and ExFEXT |
| 04/30112177 DC : DRAFT APR 2004 | EN 50289-3-10 - COMMUNICATION CABLES - SPECIFICATIONS FOR TESTS METHODS - PART 3-10: MECHANICAL TEST METHODS - TORSION AND TWISTING |
| BS EN 50289-3-11:2001 | Communication cables. Specifications for test methods. Mechanical test methods Cable cut-through resistance |
| BS EN 50289-1-1:2017 | Communication cables. Specifications for test methods Electrical test methods. General requirements |
| BS EN 50289-3-1:2001 | Communication cables. Specifications for test methods. Mechanical test methods General requirements - General requirements |
| UNE-EN 50289-3-10:2010 | Communication cables - Specifications for tests methods -- Part 3-10: Mechanical test methods - Torsion and twisting |
| BS EN 50290-4-1:2014 | Communication cables General considerations for the use of cables. Environmental conditions and safety aspects |
| PREN 50117-11-2 : DRAFT 2015 | COAXIAL CABLES - PART 11-2: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR ANALOQUE AND DIGITAL SIGNAL TRANSMISSION - DISTRIBUTION AND TRUNK CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 2000 MHZ |
| BS EN 50117-4-1 : 2008 | COAXIAL CABLES - PART 4-1: SECTIONAL SPECIFICATION FOR CABLES FOR BCT CABLING IN ACCORDANCE WITH EN 50173 - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MHZ |
| I.S. EN 50289-1-9:2017 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-9: ELECTRICAL TEST METHODS - UNBALANCE ATTENUATION (TRANSVERSE CONVERSION LOSS TCL TRANSVERSE CONVERSION TRANSFER LOSS TCTL) |
| BS EN 50117-2-3 : 2004 | COAXIAL CABLES - PART 2-3: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - DISTRIBUTION AND TRUNK CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
| UNE-EN 50288-8:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 8: Specification for type 1 cables characterised up to 2 MHz |
| CEI EN 50289-1-12 : 2005 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-12: ELECTRICAL TEST METHODS - INDUCTANCE |
| CEI EN 50289-1-9 : 2002 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-9: ELECTRICAL TEST METHODS - UNBALANCE ATTENUATION (TRANSVERSE CONVERSION LOSS TCL TRANSVERSE CONVERSION TRANSFER LOSS TCTL) |
| PREN 50289-1-1 : DRAFT 2016 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-1: ELECTRICAL TEST METHODS - GENERAL REQUIREMENTS |
| I.S. EN 50289-4-7:2008 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-7: ENVIRONMENTAL TEST METHODS - DAMP HEAT, STEADY STATE |
| I.S. EN 50290-4-1:2014 | COMMUNICATION CABLES - PART 4-1: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - ENVIRONMENTAL CONDITIONS AND SAFETY ASPECTS |
| EN 50117-1 : 2002 AMD 2 2013 | COAXIAL CABLES - PART 1: GENERIC SPECIFICATION |
| CEI EN 50289-1-10 : 2002 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-10: ELECTRICAL TEST METHODS - CROSSTALK |
| CEI EN 50289-1-8 : 2001 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-8: ELECTRICAL TEST METHODS - ATTENUATION |
| 16/30337064 DC : 0 | BS EN 50289-1-11 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-11: ELECTRICAL TEST METHODS - CHARACTERISTIC IMPEDANCE, INPUT IMPEDANCE, RETURN LOSS |
| BS EN 50289-3-2:2001 | Communication cables. Specifications for test methods. Mechanical test methods Tensile strength and elongation for conductor |
| 11/30255235 DC : 0 | BS EN 50288-1 - MULTI-ELEMENT METALIC CABLES USED IN ANALOUGE AND DIGITAL COMUNICATION AND CONTROL - PART 1: GENEIC SPECIFICATION |
| 14/30296669 DC : 0 | BS EN 50117-4-2 - COAXIAL CABLES - PART 4-2: SECTIONAL SPECIFICATION FOR CATV CABLES UP TO 6 GHZ USED IN CABLES DISTRIBUTION NETWORKS |
| 14/30297732 DC : 0 | BS EN 50289-1-17 - COMMUNICATIONS CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-17: ELECTRICAL TEST METHODS - EXOGENOUS CROSSTALK EXNEXT AND EXFEXT |
| PREN 50117-10-1 : DRAFT 2015 | COAXIAL CABLES - PART 10-1: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR ANALOQUE AND DIGITAL SIGNAL TRANSMISSION - OUTDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
| EN 50289-1-8:2017 | Communication cables - Specifications for test methods - Part 1-8: Electrical test methods - Attenuation |
| PREN 50117-10-2 : DRAFT 2015 | COAXIAL CABLES - PART 10-2: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR ANALOQUE AND DIGITAL SIGNAL TRANSMISSION - OUTDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MHZ |
| BS EN 50117-2-5 : 2004 | COAXIAL CABLES - PART 2-5: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - OUTDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MZ |
| BS EN 50289-1-14:2004 | Communication cables. Specifications for test methods Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware |
| 13/30281387 DC : 0 | BS EN 50289-3-8 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 3-8: MECHANICAL TEST METHODS - ABRASION RESISTANCE OF CABLE SHEATH MARKINGS |
| PREN 50117-9-3 : DRAFT 2015 | COAXIAL CABLES - PART 9-3: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR ANALOGUE AND DIGITAL SIGNAL TRANSMISSION - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 6000 MHZ |
| 02/209118 DC : DRAFT SEP 2002 | PREN 50289-4-14 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-14: ENVIRONMENTAL TEST METHODS - LIGHTNING |
| EN 50289-1-9:2017 | Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL) |
| BS EN 50289-1-17:2015 | Communication cables. Specifications for test methods Electrical test methods. Exogenous Crosstalk ExNEXT and ExFEXT |
| BS EN 50289-3-5:2001 | Communication cables. Specifications for test methods. Mechanical test methods Crush resistance of the cable |
| 06/30157662 DC : 0 | BS EN 50289-4-5 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS: PART 4-5: ENVIRONMENTAL TEST METHODS - CLIMATIC SEQUENCE |
| PREN 50289-1-11 : DRAFT 2016 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-11: ELECTRICAL TEST METHODS - CHARACTERISTIC IMPEDANCE, INPUT IMPEDANCE, RETURN LOSS |
| I.S. EN 50289-3-8:2013 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 3-8: MECHANICAL TEST METHODS - ABRASION RESISTANCE OF CABLE SHEATH MARKINGS |
| BS EN 50289-4-4:2008 | Communication cables. Specifications for test methods Environmental test methods. Resistance to solvents and contaminating fluids |
| BS EN 50290-2-1:2005 | Communication cables Common design rules and construction |
| 02/210607 DC : DRAFT OCT 2002 | PREN 50117-2-4 - COAXIAL CABLES - PART 2-4: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MHZ |
| BS EN 50289-4-9:2001 | Communication cables. Specifications for test methods. Environmental test methods Pneumatic resistance |
| BS EN 50289-1-10:2002 | Communication cables. Specifications for test methods. Electrical test methods Crosstalk |
| I.S. EN 50289-3-13:2003 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 3-13: MECHANICAL TEST METHODS - AEOLIAN VIBRATION |
| 00/245927 DC : DRAFT NOV 2000 | PREN 50289-4-9 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-9 - ENVIRONMENTAL TEST METHODS - PNEUMATIC RESISTANCE |
| UNE-EN 50289-1-12:2010 | Communication cables - Specifications for test methods -- Part 1-12: Electrical test methods - Inductance |
| BS EN 50289-1-3:2001 | Communication cables. Specifications for test methods. Electrical test methods Dielectric strength - Dielectric strength |
| BS EN 50289-1-11:2016 | Communication cables. Specifications for test methods Electrical test methods. Characteristic impedance, input impedance, return loss |
| BS EN 50289-3-4:2001 | Communication cables. Specifications for test methods. Mechanical test methods Tensile strength, elongation and shrinkage of insulation and sheath |
| I.S. EN 50289-4-5:2008 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-5: ENVIRONMENTAL TEST METHODS - CLIMATIC SEQUENCE |
| BS EN 50117-2-2 : 2004 | COAXIAL CABLES - PART 2-2: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - OUTDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
| I.S. EN 50117-3-1:2002 | COAXIAL CABLES - PART 3-1: SECTIONAL SPECIFICATIONS FOR CABLES USED IN TELECOM APPLICATIONS - MINIATURIZED CABLES USED IN DIGITAL COMMUNICATION SYSTEMS |
| CEI EN 50289-1-1 : 2001 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-1: ELECTRICAL TEST METHODS - GENERAL REQUIREMENTS |
| CEI EN 50289-3-8 : 2014 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 3-8: MECHANICAL TEST METHODS - ABRASION RESISTANCE OF CABLE SHEATH MARKINGS |
| CEI EN 50289-1-16 : 2008 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-16: ELECTROMAGNETIC PERFORMANCE - COUPLING ATTENUATION OF CABLE ASSEMBLIES (FIELD CONDITIONS) |
| EN 50289-3-11:2001 | Communication cables - Specifications for test methods - Part 3-11: Mechanical test methods - Cable cut-through resistance |
| EN 50289-1-4:2001 | Communication cables - Specifications for test methods - Part 1-4: Electrical test methods - Insulation resistance |
| PREN 50289-1-9 : DRAFT 2016 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-9: ELECTRICAL TEST METHODS - UNBALANCE ATTENUATION (TRANSVERSE CONVERSION LOSS TCL TRANSVERSE CONVERSION TRANSFER LOSS TCTL) |
| PREN 50289-1-17 : DRAFT 2014 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART-17: ELECTRICAL TEST METHODS - EXOGENOUS CROSSTALK EXNEXT AND XFEXT |
| I.S. EN 50117-2-2:2004 | COAXIAL CABLES - PART 2-2: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - OUTDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
| I.S. EN 50288-1:2013 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| 16/30342119 DC : 0 | BS EN 50289-1-1 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-1: ELECTRICAL TEST METHODS - GENERAL REQUIREMENTS |
| CEI EN 50289-3-7 : 2002 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 3-7: MECHANICAL TEST METHODS - ABRASION RESISTANCE OF THE CABLE SHEATH |
| UNE-EN 50289-1-1:2017 | Communication cables - Specifications for test methods - Part 1-1: Electrical test methods - General requirements |
| UNE-EN 50289-1-9:2017 | Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL) |
| CEI EN 50289-1-6 : 2002 | COMMUNICATION CABLES SPECIFICATIONS FOR TEST METHODS - PART 1-6: ELECTRICAL TEST METHODS - ELECTROMAGNETIC PERFORMANCE |
| I.S. EN 50289-3-10:2004 | COMMUNICATION CABLES - SPECIFICATIONS FOR TESTS METHODS - PART 3-10: MECHANICAL TEST METHODS - TORSION AND TWISTING |
| PREN 50117-11-1 : DRAFT 2015 | COAXIAL CABLES - PART 11-1: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR ANALOQUE AND DIGITAL SIGNAL TRANSMISSION - DISTRIBUTION AND TRUNK CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
| PREN 50117-9-1 : DRAFT 2015 | COAXIAL CABLES - PART 9-1: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR ANALOGUE AND DIGITAL SIGNAL TRANSMISSION - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
| CEI EN 50289-1-11 : 2002 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-11: ELECTRICAL TEST METHODS - CHARACTERISTIC IMPEDANCE, INPUT IMPEDANCE, RETURN LOSS |
| I.S. EN 50289-1-15:2004 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-15: ELECTROMAGNETIC PERFORMANCE - COUPLING ATTENUATION OF LINKS AND CHANNELS (LABORATORY CONDITIONS) |
| BS EN 50289-4-6:2001 | Communication cables. Specifications for test methods. Environmental test methods Temperature cycling |
| BS EN 50117-4-2:2015 | Coaxial cables Sectional specification for CATV cables up to 6 GHz used in cabled distribution networks |
| BS EN 50117-2-4 : 2004 | COAXIAL CABLES - PART 2-4: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MZ |
| CEI EN 50289-1-5 : 2001 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-5: ELECTRICAL TEST METHODS - CAPACITANCE |
| 13/30268917 DC : 0 | BS EN 50290-4-1 ED.2 PREN 50290-4-1 ED.2 - COMMUNICATION CABLES - PART 4-1: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - ENVIRONMENTAL CONDITIONS AND SAFETY ASPECTS |
| BS EN 50289-3-6:2001 | Communication cables. Specifications for test methods. Mechanical test methods Impact resistance of the cable |
| 15/30332377 DC : 0 | BS EN 50117-9-2 - COAXIAL CABLES - PART 9-2: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR ANALOGUE AND DIGITAL SIGNAL TRANSMISSION - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MHZ |
| 02/207659 DC : DRAFT JULY 2002 | PREN 50290-2-1 - COMMUNICATION CABLES - PART 2-1: COMMON DESIGN RULES AND CONSTRUCTION |
| 06/30149817 DC : 0 | EN 50289-1-17 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-17:ELECTRICAL TEST METHODS - EXOGENOUS CROSSTALK EXNEXT |
| I.S. EN 50289-1-17:2015 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-17: ELECTRICAL TEST METHODS - EXOGENOUS CROSSTALK EXNEXT AND EXFEXT |
| PREN 50117-4-2 : DRAFT 2014 | COAXIAL CABLES - PART 4-2: SECTIONAL SPECIFICATION FOR CATV CABLES UP TO 6 GHZ USED IN CABLES DISTRIBUTION NETWORKS |
| I.S. EN 50117-4-1:2008 | COAXIAL CABLES - PART 4-1: SECTIONAL SPECIFICATION FOR CABLES FOR BCT CABLING IN ACCORDANCE WITH EN 50173 - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MHZ |
| I.S. EN 50289-1-1:2017 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-1: ELECTRICAL TEST METHODS - GENERAL REQUIREMENTS |
| PREN 50117-9-2 : DRAFT 2015 | COAXIAL CABLES - PART 9-2: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR ANALOGUE AND DIGITAL SIGNAL TRANSMISSION - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MHZ |
| I.S. EN 50289-4-14:2003 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-14: ENVIRONMENTAL TEST METHODS - LIGHTNING |
| UNE-EN 50289-3-8:2014 | Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods - Abrasion resistance of cable sheath markings |
| CEI EN 50289-3-9 : 2002 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 3-9: MECHANICAL TEST METHODS - BENDING TESTS |
| UNE-EN 50289-1-16:2010 | Communication cables - Specifications for test methods - Part 1-16: Electromagnetic performance - Coupling attenuation of cable assemblies (Field conditions) |
| S.R. CLC/TR 50117-8:2013 | COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS - PART 8: REPAIR AND SUBSTITUTE OF DAMAGED BURIED CABLES |
| EN 50289-1-1:2017 | Communication cables - Specifications for test methods - Part 1-1: Electrical test methods - General requirements |
| I.S. EN 50117-2-5:2004 | COAXIAL CABLES - PART 2-5: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - OUTDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MHZ |
| I.S. EN 50289-1-8:2017 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-8: ELECTRICAL TEST METHODS - ATTENUATION |
| I.S. EN 50290-2-1:2005 | COMMUNICATION CABLES - PART 2-1: COMMON DESIGN RULES AND CONSTRUCTION |
| EN 50290-4-1:2014 | Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects |
| EN 50289-1-10:2001 | Communication cables - Specifications for test methods - Part 1-10: Electrical test methods - Crosstalk |
| EN 50289-3-5:2001 | Communication cables - Specifications for test methods - Part 3-5: Mechanical test methods - Crush resistance of the cable |
| EN 50289-1-14:2004 | Communication cables - Specifications for test methods - Part 1-14: Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware |
| EN 50289-3-10:2004 | Communication cables - Specifications for tests methods - Part 3-10: Mechanical test methods - Torsion and twisting |
| EN 50117-2-3:2004/A2:2013 | COAXIAL CABLES - PART 2-3: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - DISTRIBUTION AND TRUNK CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
| EN 50289-3-2:2001 | Communication cables - Specifications for test methods - Part 3-2: Mechanical test methods - Tensile strength and elongation for conductor |
| EN 50289-1-12:2005 | Communication cables - Specifications for test methods - Part 1-12: Electrical test methods - Inductance |
| EN 50289-4-2:2001 | Communication cables - Specifications for test methods - Part 4-2: Environmental test methods - Water penetration |
| EN 50289-3-16:2001 | Communication cables - Specifications for test methods - Part 3-16: Mechanical test methods - Cable tensile performance |
| EN 50117-4-2:2015 | Coaxial cables - Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cabled distribution networks |
| EN 50289-4-7:2008 | Communication cables - Specifications for test methods - Part 4-7: Environmental test methods - Damp heat, steady state |
| EN 50289-4-5:2008 | Communication cables - Specifications for test methods - Part 4-5: Environmental test methods - Climatic sequence |
| EN 50289-1-13:2004 | Communication cables - Specifications for test methods - Part 1-13: Electrical test methods - Coupling attenuation or screening attenuation of patch cords / coaxial cable assemblies / pre-connectorised cables |
| EN 50289-3-8:2013 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 3-8: MECHANICAL TEST METHODS - ABRASION RESISTANCE OF CABLE SHEATH MARKINGS |
| EN 50289-3-6:2001 | Communication cables - Specifications for test methods - Part 3-6: Mechanical test methods - Impact resistance of the cable |
| EN 50289-1-15:2004 | Communication cables - Specifications for test methods - Part 1-15: Electromagnetic performance - Coupling attenuation of links and channels (Laboratory conditions) |
| EN 50289-3-4:2001 | Communication cables - Specifications for test methods - Part 3-4: Mechanical test methods - Tensile strength, elongation and shrinkage of insulation and sheath |
| EN 50289-1-6:2002 | Communication cables - Specifications for test methods - Part 1-6: Electrical test methods - Electromagnetic performance |
| EN 50288-8:2012 | Multi-element metallic cables used in analogue and digital communication and control - Part 8: Specification for type 1 cables characterised up to 2 MHz |
| EN 50289-1-3:2001 | Communication cables - Specifications for test methods - Part 1-3: Electrical test methods - Dielectric strength |
| EN 50290-2-1:2005 | Communication cables - Part 2-1: Common design rules and construction |
| EN 50289-3-13:2003 | Communication cables - Specifications for test methods - Part 3-13: Mechanical test methods - Aeolian vibration |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.