EN 50311:2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps
01-04-2016
04-06-2003
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
3.1 General terms
3.2 Lamps and characteristics
4 Classification
5 Characteristics
5.1 Rated voltages
5.2 Overvoltages
5.3 Type of fluorescent lamps
6 Product information
6.1 Nature of information
6.2 Marking
6.3 Instructions for storage, installation operation and
maintenance
7 Normal service conditions
7.1 Temperature
7.2 Other conditions
8 Constructional and performance requirements
8.1 Constructional requirements
8.2 Performance requirements
8.3 Safety requirements
9 Tests
9.1 Test conditions
9.2 Kinds of tests
9.3 Verification of constructional and performance requirements
Annex A (informative) Types of lamps
Annex B (informative) Electronic ballast for lamps up to 40 W
Annex C (informative) Electronic ballast for lamps up to 40 W
Annex D (informative) Electronic ballast for lamps up to 15 W
Annex E (informative) Electronic ballast for lamps up to 10 W
Annex F (informative) Electronic ballast for lamps up to 10 W
Annex G (informative) Basic schematic diagrams
Annex H (informative) Correspondence with EN 60924 requirements
This standard specifies the performance and constructional requirements, and associated tests, for d.c. supplied electronic ballasts used to supply fluorescent lamps for lighting on railway rolling stock. Its requirements replace those of EN 60925 for all railway rolling stock applications and precise and complete those of EN 60924 for the specific needs of railway rolling stock applications.This standard applies to electronic ballasts-supplying pre-heated cathode fluorescent lamps without integrated starters, tubular or single capped, according to EN 60081 and EN 60901 respectively,-having a single and non adjustable luminous flux level.It does not apply to electronic ballasts supplying non pre-heated cathode lamps and/or lamps with integrated starters.
Committee |
CLC/TC 9X
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
BS EN 50311:2003 | Identical |
CEI EN 50311 : 2004 | Identical |
SN EN 50311 : 2003 | Identical |
NBN EN 50311 : 2003 | Identical |
NEN EN 50311 : 2003 | Identical |
UNE-EN 50311:2004 | Identical |
DIN EN 50311 : 2004 | Identical |
VDE 0115-450 : 2004 | Identical |
I.S. EN 50311:2003 | Identical |
NF EN 50311 : 2003 | Identical |
PN EN 50311 : 2003 | Identical |
17/30353444 DC : DRAFT SEP 2017 | BS EN 13272-2 - RAILWAY APPLICATIONS - ELECTRICAL LIGHTING FOR ROLLING STOCK IN PUBLIC TRANSPORT SYSTEMS - PART 2: URBAN RAIL SYSTEMS |
EN 60924:1991/A1:1994 | SPECIFICATION FOR GENERAL AND SAFETY REQUIREMENTS FOR D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
IEC 61373:2010 | Railway applications - Rolling stock equipment - Shock and vibration tests |
IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
IEC 60417-1:2002 | Graphical symbols for use on equipment - Part 1: Overview and application |
IEC 60050-811:1991 | International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction |
EN 50121-3-2:2016 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
EN 61373:2010/AC:2017-09 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010) |
EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
EN 50153 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
EN 60417-1:2002 | GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 1: OVERVIEW AND APPLICATION |
EN 60927:2007/A1:2013 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS (IEC 60927:2007/A1:2013 (34C/951/CDV)) |
IEC 60925:1989+AMD1:1996+AMD2:2001 CSV | DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements |
EN 50124-1:2017 | Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
IEC 60901:1996+AMD1:1997+AMD2:2000 CSV | Single-capped fluorescent lamps - Performance specifications |
EN 50155:2017 | Railway applications - Rolling stock - Electronic equipment |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60927:2007+AMD1:2013 CSV | Auxiliaries for lamps - Starting devices (other than glow starters)- Performance requirements |
EN 60901:1996/A6:2017 | SINGLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60901:1996/A6:2014, MODIFIED) |
IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
IEC 60077-1:2017 | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
EN 45545-5:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
EN 60925:1991/A2:2001 | SPECIFICATION FOR PERFORMANCE REQUIREMENTS FOR D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.