EN 562 : 2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
01-03-2010
12-01-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Pressure
4.1 Unit of pressure
4.2 Maximum scale reading
4.3 Maximum pressure mark
5 Manufacturing requirements
5.1 Materials
5.2 Design and dimensions
6 Safety
7 Marking
8 Tests
8.1 General
8.2 Design and manufacturing standard
8.3 Accuracy
8.4 Torsion test
8.5 Bend test
8.6 Case vent test
8.7 Strength
8.8 Flammability test
Bibliography
Specifies requirements for Bourdon tube pressure gauges normally used with compressed gases at pressures up to 300 bar in welding, cutting and allied processes. Also covers use for dissolved acetylene and for liquefied gases under pressure. Coverage includes: safety, marking and pressure. Also gives detailed definitions and diagrams.
| Committee |
TC 121
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NF EN 562 : 2003 | Identical |
| NEN EN 562 : 2003 | Identical |
| BS EN 562:2003 | Identical |
| I.S. EN 562:2003 | Identical |
| NS EN 562 : 2003 | Identical |
| PN EN 562 : 2006 | Identical |
| UNI EN 562 : 2004 | Identical |
| SN EN 562 : 2003 | Identical |
| UNE-EN 562:2004 | Identical |
| NBN EN 562 : 2003 | Identical |
| DIN EN 562:2003-09 | Identical |
| 04/30122625 DC : DRAFT SEP 2004 | CEN/BT/TF 158 N06 - DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - PART 3: SAFETY REQUIREMENTS FOR SYSTEM COMPONENTS |
| 01/713049 DC : DRAFT SEP 2001 | PREN ISO 17662 - WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES |
| EN 1326:1996 | Gas welding equipment - Small kits for gas brazing and welding |
| 04/30122629 DC : DRAFT SEP 2004 | CEN/BT/TF 158 N10 - DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - PART 7: CYLINDRICAL BEVERAGE CONTAINERS WITH A CAPACITY OF UP TO 50 LITRES AND RATED FOR AN OPERATING PRESSURE UP TO 3 BAR |
| BS EN 13705:2004 | Welding of thermoplastics. Machines and equipment for hot gas welding (including extrusion welding) |
| DIN EN 13705:2004-09 | Welding of thermoplastics - Machines and equipment for hot gas welding (including extrusion welding) |
| 04/30124314 DC : 0 | EN 15068 - GAS WELDING EQUIPMENT - LABORATORY MEASUREMENT OF NOISE EMITTED BY BLOWPIPES FOR WELDING, CUTTING, HEATING, BRAZING AND SOLDERING - MEASUREMENT METHOD |
| BS EN 585:1995 | Gas welding equipment. Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 200 bar |
| BS EN 837-1:1998 | Pressure gauges Bourdon tube pressure gauges. Dimensions, metrology, requirements and testing |
| I.S. EN 837-1:1997 | PRESSURE GAUGES - PART 1: BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING |
| 04/30122630 DC : DRAFT SEP 2004 | CEN/BT/TF 158 N11 - DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - PART 8: CYLINDRICAL BEVERAGE CONTAINERS WITH A CAPACITY OF UP TO 50 LITRES AND RATED FOR AN OPERATING PRESSURE UP TO 7 BAR |
| 10/30234293 DC : 0 | BS EN 12110 - TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| BS EN 13918:2003 | Gas welding equipment. Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes. Classification, specification and tests |
| BS EN 961:1996 | Gas welding equipment. Manifold regulators used in welding, cutting and allied processes up to 200 bar |
| EN 13918 : 2003 | GAS WELDING EQUIPMENT - INTEGRATED FLOWMETER REGULATORS USED ON CYLINDERS FOR WELDING, CUTTING AND ALLIED PROCESSES - CLASSIFICATION, SPECIFICATION AND TESTS |
| EN 13705:2004 | Welding of thermoplastics - Machines and equipment for hot gas welding (including extrusion welding) |
| EN 585 : 1994 | GAS WELDING EQUIPMENT - PRESSURE REGULATORS FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 200 BAR |
| EN 961 : 1995 | GAS WELDING EQUIPMENT - MANIFOLD REGULATORS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 200 BAR |
| I.S. EN 13918:2003 | GAS WELDING EQUIPMENT - INTEGRATED FLOWMETER REGULATORS USED ON CYLINDERS FOR WELDING, CUTTING AND ALLIED PROCESSES - CLASSIFICATION, SPECIFICATION AND TESTS |
| DIN EN 13918:2003-08 | GAS WELDING EQUIPMENT - INTEGRATED FLOWMETER REGULATORS USED ON CYLINDERS FOR WELDING, CUTTING AND ALLIED PROCESSES - CLASSIFICATION, SPECIFICATION AND TESTS |
| ISO 9539:2010 | Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes |
| ISO 10102:2001 | Assembly tools for screws and nuts Double-headed open-ended engineers' wrenches Length of wrenches and thickness of the heads |
| EN ISO 1302:2002 | Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002) |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| ISO 2503:2009 | Gas welding equipment Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) |
| EN 472:1994 | Pressure gauges - Vocabulary |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| EN ISO 4589-2:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017) |
| ISO 497:1973 | Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
| ISO 4589-2:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 29539 : 1992 | SPECIFICATION FOR MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.