• EN ISO 1302 : 2002

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION (ISO 1302:2002)

    Available format(s): 

    Superseded date:  31-01-2022

    Language(s): 

    Published date:  13-01-2013

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Graphical symbols for the indication of
       surface texture
    5 Composition of complete graphical symbol
       for surface texture
    6 Indication of surface texture parameters
    7 Indication of manufacturing method or related
       information
    8 Indication of the surface lay
    9 Indication of machining allowance
    10 Summarizing of indications of surface texture
       requirements and their values
    11 Position on drawings and other technical
       product documentation
    Annex A (normative) - Proportions and dimensions
            of graphical symbols
    Annex B (informative) - Synoptive tables
    Annex C (informative) - Examples of indication of
            surface texture requirements
    Annex D (informative) - Minimum indications for
            unambiguous control of surface functions
    Annex E (informative) - Surface texture parameter
            designations
    Annex F (informative) - Evaluation length, ln
    Annex G (informative) - Transmission band and
            sampling length
    Annex H (informative) - Consequences of new ISO
            surface texture standards
    Annex I (informative) - Former practice
    Annex J (informative) - Relation to the GPS matrix
            model
    Bibliography
    Annex ZA (normative) - Normative references to
             international publications with
             their relevant European publications

    Abstract - (Show below) - (Hide below)

    Describes the rules for the indication of surface texture in technical product documentation (e.g. drawings, specifications, contracts, reports) by means of graphical symbols and textual indications.

    General Product Information - (Show below) - (Hide below)

    Committee TC 290
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. EN 61515:2016 MINERAL INSULATED METAL-SHEATHED THERMOCOUPLE CABLES AND THERMOCOUPLES
    DIN EN 16701:2015-04 ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY
    UNE-EN 50180-2:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components
    BS EN 60512-16-9 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE
    CEI EN 62282-6-300 : 2013 FUEL CELL TECHNOLOGIES - PART 6-300: MICRO FUEL CELL POWER SYSTEMS - FUEL CARTRIDGE INTERCHANGEABILITY
    CEI EN 60603-7-1 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS
    I.S. EN 1400-2:2002 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - PART 2: MECHANICAL REQUIREMENTS AND TESTS
    BS EN 61076-4-115:2003 (published 2003-10) Connectors for electronic equipment. Printed board connectors with assessed quality Backplane connector for InfiniBand equipment
    10/30196826 DC : 0 BS ISO 12671 - THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS
    BS EN 1400 : 2013 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS
    BS EN 61515:1996 MINERAL INSULATED METAL-SHEATHED THERMOCOUPLE CABLES AND THERMOCOUPLES
    BS EN 62282-6-300 : 2013 FUEL CELL TECHNOLOGIES - PART 6-300: MICRO FUEL CELL POWER SYSTEMS - FUEL CARTRIDGE INTERCHANGEABILITY
    13/30255310 DC : 0 BS EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
    I.S. EN 60512-16-5:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS)
    07/30164079 DC : 0 BS ISO 679 - METHODS OF TESTING CEMENTS - DETERMINATION OF STRENGTH
    BS EN 60130-9 : 2011 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT
    PREN 4560 : 200P2 AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES, SPHERICAL, UP TO 21000 KPA - INCH SERIES - TECHNICAL SPECIFICATION
    PREN 3155-001 : 200P5 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION
    I.S. EN 61076-2-107:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING
    I.S. EN 60130-9:2011 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT
    CEI EN 61515 : 1997 MINERAL INSULATED METAL-SHEATHED THERMOCOUPLE CABLES AND THERMOCOUPLES
    EN 1400:2013+A1:2014 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS
    BS EN 61076-1:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
    CEI EN 60512-16-9 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE
    UNE-EN 856:2015 Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
    DIN EN 13081:2012-05 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler (includes Amendment A1:2012)
    DIN EN 14879-1 E : 2005 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
    BS EN 14665 : 2004 THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS
    BS EN 196-1:2016 Methods of testing cement Determination of strength
    DIN EN 14879-1:2005-12 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
    BS EN 14350-1 : 2004 CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 1: GENERAL AND MECHANICAL REQUIREMENTS AND TESTS
    UNE-EN 854:2015 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
    BS EN 857:2015 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    BS EN 4560 : 2015 AEROSPACE SERIES - PIPE COUPLING 37 DEGREES, SPHERICAL, UP TO 21000 KPA - INCH SERIES - TECHNICAL SPECIFICATION
    UNE-EN 16313:2014 Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G A and inside cone
    I.S. EN 854:2015 RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    EN 175301-801:2006 Detail Specification: High density rectangular connectors, round removable crimp contacts
    EN 60603-7-5:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ
    EN 13083:2008+A1:2013 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
    DIN EN 562:2003-09 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
    EN 61076-4-114 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-114: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION HAVING A GRID OF 1 MM X 1,5 MM
    DIN EN 14665:2005-02 THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS
    EN 61076-2-106 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67
    DIN EN 14882:2005-11 Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of friction
    EN 61076-2-104:2014 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS WITH M8 SCREW-LOCKING OR SNAP-LOCKING (IEC 61076-2-104:2014)
    EN 61076-1:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
    EN 13081:2008+A1:2012 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
    EN 50180-2:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components
    EN 61076-4-113 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS
    DIN EN 853:2016-09 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
    BS EN 3155-001:2009 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION
    I.S. EN 61076-2-106:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67
    BS EN 61076-2-106:2011 (published 2011-09) Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67
    BS EN 61076-2-107 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING
    I.S. EN 14665:2004 THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS
    BS EN 50180-2:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers Requirement for bushing components
    DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
    I.S. EN 14350-1:2004 CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 1: GENERAL AND MECHANICAL REQUIREMENTS AND TESTS
    I.S. EN 50180-2:2015 BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS
    BS EN 16701 : 2014 ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY
    BS EN 61076-3-118 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
    PREN 1426 : DRAFT 2013 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
    CEI EN 61076-2-106 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67
    04/101741 DC : DRAFT JAN 2004 EN 14882 - RUBBER OR PLASTIC COATED FABRICS - DETERMINATION OF THE STATIC AND DYNAMIC COEFFICIENT OF FRICTION
    BS EN 61076-4-113:2003 (published 2003-03) Connectors for electronic equipment Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
    EN 61076-2-113 : 2017 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ (IEC 61076-2-113:2017)
    CEI EN 50299-2 : 2016 OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS
    BS EN 61076-3-103:2004 (published 2004-02) Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)
    I.S. EN 61076-4-115:2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-115: PRINTED BOARD CONNECTORS - BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT
    CEI EN 60512-16-5 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS)
    CEI EN 61076-4-115 : 2004 CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-115: PRINTED BOARD CONNECTORS BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT
    BS 2000-49(2015) : 2015 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
    PREN 3275 : 200P1 AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES UP TO 28000 KPA DYNAMIC BEAM SEAL - METRIC SERIES - TECHNICAL SPECIFICATION
    BS EN 61076-2-101:2012 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for M12 connectors with screw-locking
    BS EN 1999-1-1 : 2007 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
    CEI EN 50343 : 2015 RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING
    BS EN 60603-7 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS
    UNE-EN 50299-2:2015 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 2: Dry-type cable terminations
    EN 1426:2015 (edition 2) Bitumen and bituminous binders - Determination of needle penetration
    I.S. EN 856:2015 RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    DIN EN 14350-1:2004-11 CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 1: GENERAL AND MECHANICAL REQUIREMENTS AND TESTS
    DIN EN 15272-2:2007-06 Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead; German version EN 15272-2:2007
    DIN EN 14372:2004-11 CHILD USE AND CARE ARTICLES - CUTLERY AND FEEDING UTENSILS - SAFETY REQUIREMENTS AND TESTS
    DIN EN 15049:2007-12 Railway applications - Suspension components - Torsion bar, steel
    I.S. EN 1426:2015 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
    I.S. EN 13083:2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
    DIN EN 1400-2:2002-12 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - PART 2: MECHANICAL REQUIREMENTS AND TESTS
    I.S. EN 4560:2015 AEROSPACE SERIES - PIPE COUPLING 37 DEGREES, SPHERICAL, UP TO 21000 KPA - INCH SERIES - TECHNICAL SPECIFICATION
    I.S. EN 13081:2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
    I.S. EN 853:2015 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION
    I.S. EN 857:2015 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    EN 60603-7:2009/A1:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008/A1:2011)
    I.S. EN 1375:2002 IDENTIFICATION CARD SYSTEM - INTERSECTOR INTEGRATED CIRCUIT(S) CARD ADDITIONAL FORMATS - ID-000 CARD SIZE AND PHYSICAL CHARACTERISTICS
    I.S. EN 196-1:2016 METHODS OF TESTING CEMENT - PART 1: DETERMINATION OF STRENGTH
    DIN EN 1999-1-1:2014-03 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
    I.S. EN 61076-3-118:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
    I.S. EN 60603-7-1:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS
    BS EN 16313 : 2013 CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G 3/4 A AND INSIDE CONE
    17/30358538 DC : 0 BS EN 3275 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES UP TO 28000 KPA - DYNAMIC BEAM SEAL - METRIC SERIES - TECHNICAL SPECIFICATION
    CEI EN 61076-2-107 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING
    CEI EN 61076-3-118 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
    BS EN 60603-7-1:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS
    I.S. EN 62282-6-300:2013 FUEL CELL TECHNOLOGIES - PART 6-300: MICRO FUEL CELL POWER SYSTEMS - FUEL CARTRIDGE INTERCHANGEABILITY (IEC 62282-6-300:2012 (EQV))
    BS EN 50299-2 : 2014 OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS
    I.S. EN 61076-3-103:2004 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-103: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SINGLE ROW CONNECTORS WITH NON-REMOVABLE RIBBON CABLE CONTACTS ON 1,25 MM PITCH USED FOR HIGH SPEED SERIAL DATA (HSSDC)
    CEI EN 61076-4-114 : 2004 CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-114: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION HAVING A GRID OF 1 MM X 1,5 MM
    DIN EN 16313:2013-08 Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G 3/4 A and inside cone
    I.S. EN 61076-4-113:2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS
    BS EN 175301-801:2006 Detail specification. High density rectangular connectors, round removable crimp contacts
    BS EN 50343 : 2014 RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING
    BS EN 61076-2-109 : 2014 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M 12 X 1 SCREW-LOCKING, FOR DATA TRANSMISSION FREQUENCIES UP TO 500 MHZ
    I.S. EN 16313:2013 CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G 3/4 A AND INSIDE CONE
    EN IEC 61076-2-111 : 2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING (IEC 61076-2-111:2017)
    I.S. EN 61076-2-109:2014 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M 12 X 1 SCREW-LOCKING, FOR DATA TRANSMISSION FREQUENCIES UP TO 500 MHZ
    I.S. EN 175301-801:2006 DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS
    CEI EN 50299-1 : 2016 OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 1: FLUID-FILLED CABLE TERMINATIONS
    I.S. EN 61076-3-104:2017 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ
    DIN EN 1426:2015-09 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
    DIN EN 13083:2013-08 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
    DIN EN 14882 E : 2005 RUBBER OR PLASTIC COATED FABRICS - DETERMINATION OF THE STATIC AND DYNAMIC COEFFICIENT OF FRICTION
    UNE-EN 1426:2015 Bitumen and bituminous binders - Determination of needle penetration
    BS EN 853:2015 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION
    UNE-EN 853:2015 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
    DIN EN 856:2016-09 RUBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    EN 1999-1-1:2007/A2:2013 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
    UNI EN 13083 : 2013 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
    UNI EN 16313 : 2013 CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G 3/4 A AND INSIDE CONE
    UNI EN 13081 : 2012 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
    DIN 28120:2004-06 Circular sight glasses with case in main power connection
    CEI EN 61076-2-113 : 1ED 2017 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ
    I.S. EN 562:2003 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
    12/30235292 DC : 0 BS EN 50343 - RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING
    BS EN 50299-1 : 2014 OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 1: FLUID-FILLED CABLE TERMINATIONS
    UNE-EN 50299-1:2015 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 1: Fluid-filled cable terminations
    I.S. EN 61076-2-101:2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING (IEC 61076-2-101:2012 (EQV))
    I.S. EN 1400:2013 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS
    EN IEC 61076-3-119 : 2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ (IEC 61076-3-119:2017)
    BS EN 60512-16-5 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS)
    BS EN 60603-7-5 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ
    CEI EN 61076-1 : 2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
    I.S. EN 16701:2014 ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY
    I.S. EN 50299-2:2014 OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS
    I.S. EN 3155-001:2016 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION
    I.S. EN 60603-7:2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008)
    I.S. EN 61076-2-104:2014 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS WITH M8 SCREW-LOCKING OR SNAP-LOCKING
    DIN EN 1400:2014-07 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS
    I.S. EN 50343:2014 RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING
    I.S. EN 15016-1:2004 TECHNICAL DRAWINGS - RAILWAY APPLICATIONS - PART 1: GENERAL PRINCIPLES
    DIN EN 15049 E : 2007 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL
    BS EN 1375 : 2002 IDENTIFICATION CARD SYSTEM - INTERSECTOR INTEGRATED CIRCUIT(S) CARD ADDITIONAL FORMATS - ID-000 CARD SIZE AND PHYSICAL CHARACTERISTICS
    BS EN 1400-2 : 2002 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - MECHANICAL REQUIREMENTS AND TESTS
    BS EN 14879-1 : 2005 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
    BS EN 13081 : 2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
    BS EN 13083 : 2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
    UNE-EN 857:2015 Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
    BS EN 15272-2:2007 Inland navigation vessels. Rope leading Fairlead
    BS EN 14882:2005 Rubber or plastic coated fabrics. Determination of the static and dynamic coefficient of friction
    BS EN 14372 : 2004 CHILD USE AND CARE ARTICLES - CUTLERY AND FEEDING UTENSILS - SAFETY REQUIREMENTS AND TESTS
    BS EN 15049:2007 (published 2007-09) Railway applications. Suspension components. Torsion bar, steel
    BS EN 1426:2015 Bitumen and bituminous binders. Determination of needle penetration
    BS EN 856:2015 RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    EN 61515:2016 MINERAL INSULATED METAL-SHEATHED THERMOCOUPLE CABLES AND THERMOCOUPLES (IEC 61515:2016)
    DIN EN 15016-1:2005-01 Technical drawings - Railway applications - Part 1: General Principles
    EN 196-1:2016 (edition 2) Methods of testing cement - Part 1: Determination of strength
    EN 14350-1 : 2004 CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 1: GENERAL AND MECHANICAL REQUIREMENTS AND TESTS
    EN 853:2015 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION
    EN 14372 : 2004 CHILD USE AND CARE ARTICLES - CUTLERY AND FEEDING UTENSILS - SAFETY REQUIREMENTS AND TESTS
    EN 1400-2 : 2002 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - MECHANICAL REQUIREMENTS AND TESTS
    EN 16701 : 2014 ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY
    EN 14665 : 2004 THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS
    EN 15049:2007 Railway applications - Suspension components - Torsion bar, steel
    EN 15016-1 : 2004 TECHNICAL DRAWINGS - RAILWAY APPLICATIONS - PART 1: GENERAL PRINCIPLES
    EN 1375 : 2002 IDENTIFICATION CARD SYSTEM - INTERSECTOR INTEGRATED CIRCUIT(S) CARD ADDITIONAL FORMATS - ID-000 CARD SIZE AND PHYSICAL CHARACTERISTICS
    EN 854:2015 RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    EN 857:2015 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    EN 4560:2015 AEROSPACE SERIES - PIPE COUPLING 37 DEGREES, SPHERICAL, UP TO 21000 KPA - INCH SERIES - TECHNICAL SPECIFICATION
    EN 15272-2:2007 Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead
    EN 14882 : 2005 RUBBER OR PLASTIC COATED FABRICS - DETERMINATION OF THE STATIC AND DYNAMIC COEFFICIENT OF FRICTION
    EN 16313 : 2013 Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone
    EN 856:2015 RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    EN 3155-001:2016 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION
    EN 562 : 2003 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
    EN 14879-1 : 2005 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
    DIN EN 16701 E : 2015 ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY
    CEI EN 61076-2-101 : 2013 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING
    I.S. EN 61076-4-114:2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-114: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION HAVING A GRID OF 1 MM X 1,5 MM
    BS EN 15016-1:2004 Technical drawings. Railway applications General Principles
    09/30202313 DC : 0 BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS
    DIN 3863:2003-08 COMPRESSION COUPLINGS - SPHERICAL LINERS - DESIGN AND TYPES OF PORT END U AND Y
    13/30281716 DC : 0 BS EN 50299-2 - OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT U[M] FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS
    BS EN 61076-2-113:2017 (published 2017-11) Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
    BS EN 61076-2-104:2014 (published 2014-11) Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for circular connectors with M8 screw-locking or snap-locking
    14/30301109 DC : 0 BS EN 50180-2 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS
    BS EN 61076-3-104 : 2017 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ (IEC 61076-3-104:2017)
    BS EN 61076-4-114:2003 (published 2003-06) Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
    DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
    CEI EN 175301-801 : 2007 DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS
    CEI EN 60130-9 : 2012 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT
    I.S. EN IEC 61076-3-119:2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ
    I.S. EN 50299-1:2014 OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 1: FLUID-FILLED CABLE TERMINATIONS
    UNE-EN 62282-6-300:2013 Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
    I.S. EN IEC 61076-2-111:2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING
    I.S. EN 61076-2-113:2017 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ
    UNE-EN 1400:2013 Child use and care articles - Soothers for babies and young children - Safety requirements and test methods
    EN 61076-3-104:2017 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ (IEC 61076-3-104:2017)
    DIN EN 14372 E : 2004 CHILD USE AND CARE ARTICLES - CUTLERY AND FEEDING UTENSILS SAFETY - REQUIREMENTS AND TESTS
    BS EN 854:2015 RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    BS EN 562 : 2003 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
    EN 61076-4-115 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-115: PRINTED BOARD CONNECTORS - BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT
    EN 60512-16-5 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS)
    EN 61076-2-101:2012 Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
    EN 61076-2-109 : 2014 Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz
    EN 60130-9:2011 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT
    EN 50299-1 : 2014 OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 1: FLUID-FILLED CABLE TERMINATIONS
    DIN EN 857:2016-09 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION
    EN 50299-2 : 2014 OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS
    DIN EN 854:2016-09 RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION
    EN 62282-6-300:2013 FUEL CELL TECHNOLOGIES - PART 6-300: MICRO FUEL CELL POWER SYSTEMS - FUEL CARTRIDGE INTERCHANGEABILITY (IEC 62282-6-300:2012)
    EN 60603-7-1:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS
    EN 60512-16-9 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE
    EN 61076-2-107 : 2010 Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
    EN 50343 : 2014 AMD 1 2017 RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING
    EN 61076-3-103 : 2004 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-103: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SINGLE ROW CONNECTORS WITH NON-REMOVABLE RIBBON CABLE CONTACTS ON 1,25 MM PITCH USED FOR HIGH SPEED SERIAL DATA (HSSDC)
    EN 61076-3-118 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING

    Standards Referencing This Book - (Show below) - (Hide below)

    EN ISO 4287:1998/A1:2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
    ISO/TR 14638:1995 Geometrical product specification (GPS) Masterplan
    ISO 12179:2000 Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments
    EN ISO 13565-3 : 2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE
    ISO 4287:1997 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
    ISO 13565-3:1998 Geometrical Product Specifications (GPS) Surface texture: Profile method; Surfaces having stratified functional properties Part 3: Height characterization using the material probability curve
    EN ISO 4288 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
    ISO 1101:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
    EN ISO 14660-1:1999 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS
    EN ISO 81714-1 : 2010 DESIGN OF GRAPHICAL SYMBOLS FOR USE IN THE TECHNICAL DOCUMENTATION OF PRODUCTS - PART 1: BASIC RULES
    ISO 14253-1:2017 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications
    EN ISO 3098-2 : 2000 TECHNICAL PRODUCT DOCUMENTATION - LETTERING - PART 2: LATIN ALPHABET, NUMERAL AND MARKS (ISO 3098-2:2000)
    EN ISO 8785 : 1999 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE IMPERFECTIONS - TERMS, DEFINITIONS AND PARAMETERS
    EN ISO 11562:1997/AC:2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - METROLOGICAL CHARACTERISTICS OF PHASE CORRECT FILTERS
    ISO 10135:2007 Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD)
    ISO 81714-1:2010 Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules
    ISO 1456:2009 Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
    EN ISO 13565-2 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO
    ISO 5436-2:2012 Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards
    ISO 3274:1996 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments
    ISO 3098-2:2000 Technical product documentation — Lettering — Part 2: Latin alphabet, numerals and marks
    ISO 8785:1998 Geometrical Product Specification (GPS) — Surface imperfections — Terms, definitions and parameters
    ISO 129-1:2004 Technical drawings Indication of dimensions and tolerances Part 1: General principles
    ISO 5436-1:2000 Geometrical Product Specifications (GPS) Surface texture: Profile method; Measurement standards Part 1: Material measures
    EN ISO 13565-1 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS
    ISO 14660-1:1999 Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions
    EN ISO 12085:1997/AC:2008 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS
    EN ISO 3274 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
    ISO 10209-1:1992 Technical product documentation — Vocabulary — Part 1: Terms relating to technical drawings: general and types of drawings
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective