EN 60079-10-2:2015
Current
The latest, up-to-date edition.
Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
06-03-2015
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Area classification
5 Sources of release
6 Zones
7 Dust layers
8 Documentation
Annex A (informative) - Area classification examples
Annex B (informative) - Housekeeping
Annex C (informative) - Hybrid mixtures
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
NEW! IEC 60079-10-2:2015 is available as IEC Standards+ 60079-10-2:2015 which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60079-10-2:201 5 is concerned with the identification and classification of areas where explosive dust atmospheres and combustible dust layers are present, in order to permit the proper assessment of ignition sources in such areas. In this standard, explosive dust atmospheres and combustible dust layers are treated separately. In Clause 4, area classification for explosive dusts clouds is described, with dust layers acting as one of the possible sources of release. In Clause 7 other general considerations for dust layers are described. The examples in this standard are based on a system of effective housekeeping being implemented in the plant to prevent dust layers from accumulating. Where effective housekeeping is not present, the area classification includes the possible formation of explosive dust clouds from dust layers. The principles of this standard can also be followed when combustible fibres or flyings might cause a hazard. This standard is intended to be applied where there can be a risk due to the presence of explosive dust atmospheres or combustible dust layers under normal atmospher ic conditions. Please refer to the foreword of the document for a detailed listing of the significant technical changes from the previous edition.
Keywords: explosive dust atmospheres, combustible dust layers, ignition hazards
Committee |
CLC/TC 31
|
DevelopmentNote |
Supersedes EN 61241-10. (10/2009)
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Current
|
Supersedes |
Standards | Relationship |
BS EN 60079-10-2:2015 | Identical |
NF EN 60079-10-2 : 2015 | Identical |
NEN EN IEC 60079-10-2 : 2015 | Identical |
I.S. EN 60079-10-2:2015 | Identical |
CEI EN 60079-10-2 : 2016 | Identical |
IEC 60079-10-2:2015 | Identical |
VDE 0165-102 : 2015-10 | Identical |
DIN EN 60079-10-2 : 2015-10 | Identical |
UNE-EN 60079-10-2:2016 | Identical |
PN EN 60079-10-2 : 2015 | Identical |
NBN EN 60079-10-2 : 2015 | Identical |
UNE-EN 60079-17:2014 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
PD CEN/TR 15339-3:2014 | Thermal spraying. Safety requirements for thermal spraying equipment Torches for thermal spraying and their connection and supply units |
PREN 50050-1 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
PD CEN/TR 15339-4:2014 | Thermal spraying. Safety requirements for thermal spraying equipment Gas and liquid fuel supply |
CLC/TS 62603-1:2014 | Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications |
16/30347802 DC : 0 | BS EN 1149-5 - PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 5: MATERIAL PERFORMANCE AND DESIGN REQUIREMENTS |
PREN 1127-1 : DRAFT 2017 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
UNE-EN 50050-2:2014 | Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable coating powder |
12/30262935 DC : 0 | BS EN 15339-4 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 4: GAS AND LIQUID FUEL SUPPLY |
11/30248849 DC : 0 | BS EN 50050-3:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
CEN/TR 15339-4:2014 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply |
UNE-EN 60079-10-1:2016 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
S.R. CEN/TR 15339-4:2014 | THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 4: GAS AND LIQUID FUEL SUPPLY |
BS EN 61340-4-4 : 2012 | ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) |
S.R. CEN/TR 16787:2014 | INDUSTRIAL GAS INSTALLATION - GUIDELINE |
PD CLC/TR 60079-32-1:2015 | Explosive atmospheres Electrostatic hazards, guidance |
UNE-EN 50050-3:2014 | Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock |
17/30365866 DC : 0 | BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
18/30369304 DC : DRAFT APR 2018 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
DIN EN 1473:2016-10 | Installation and equipment for liquefied natural gas - Design of onshore installations |
UNE-EN 1127-1:2012 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
BS EN 60079-18 : 2015 | EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' |
EN 1010-1:2004+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
EN 50177:2009/A1:2012 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
EN 12779:2015 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
EN 60079-32-2:2015 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
EN 62657-1:2017 | Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations |
EN 50050-3:2013 | Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock |
BS EN 60079-32-2:2015 | Explosive atmospheres Electrostatics hazards. Tests |
11/30248842 DC : 0 | BS EN 50050-1:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
BS EN 60079-29-2:2015 | Explosive atmospheres Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
CEN/TR 16787:2014 | Industrial Gas Installation - Guideline |
PD CLC/TS 62603-1:2014 | Industrial process control systems. Guideline for evaluating process control systems Specifications |
10/30230365 DC : 0 | BS EN 50050-2 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
BS EN 62305-3:2011 | Protection against lightning Physical damage to structures and life hazard |
BS EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material. Safety requirements |
S.R. CLC/TR 60079-32-1:2015 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE |
BS EN 50177 : 2009 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
I.S. EN IEC 61340-4-4:2018 | ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) |
I.S. EN 50177:2009 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
BS EN 1127-1:2019 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology |
BS EN 1127-1:2011 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology |
CEI EN 62305-3 : 2013 | PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD |
EN 61936-1 : 2010 AMD 1 2014 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014) |
DIN EN 12779:2016-03 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
DIN EN 1010-1:2011-06 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010) |
BS EN 1473:2016 | Installation and equipment for liquefied natural gas. Design of onshore installations |
DIN EN 1473:1997-11 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
DIN EN 1127-1:2011-10 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
I.S. EN 12115:2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
EN 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
I.S. EN 1473:2016 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
I.S. EN 12779:2015 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS |
EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
I.S. EN 1010-1:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
VDI 2263 Blatt 7:2010-07 | Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in spraying and drying integrated equipment |
VDI 3802 Blatt 1:2014-09 | Air conditioning systems for factories |
CEI EN 50050-2 : 2014 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
PREN 50223 : DRAFT 2013 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
13/30284894 DC : 0 | BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
PD CEN/CLC/TR 16832:2015 | Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) |
BS EN 50050-2:2013 | Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable coating powder |
PREN 1473 : DRAFT 2018 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
BS PD CEN/TR 16832 : 2015 | SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS) |
BS EN 60079-17:2014 | Explosive atmospheres Electrical installations inspection and maintenance |
EN 1473:2016 | Installation and equipment for liquefied natural gas - Design of onshore installations |
CEI EN 60079-17 : 2015 | EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE |
BS EN 50050-3:2013 | Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable flock |
CEI EN 50050-1 : 2014 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
PD CEN/TR 16787:2014 | Industrial Gas Installation. Guideline |
14/30292850 DC : 0 | BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
I.S. EN 50628:2016 | ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES |
PREN 12779 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
I.S. EN 50050-1:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
I.S. EN 60079-29-2:2015 | EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN |
S.R. CEN/CLC/TR 16832:2015&LC:2015 | SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS) |
I.S. EN 50050-2:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
I.S. EN 62305-3:2011 | PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD |
I.S. EN 60079-17:2014 | EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE |
I.S. EN 62305-2:2012 | PROTECTION AGAINST LIGHTNING - PART 2: RISK MANAGEMENT (IEC 62305-2:2010 (MOD)) |
UNE-EN 62305-3:2011 | Protection against lightning -- Part 3: Physical damages to structures and life hazard |
CEN/CLC/TR 16832:2015 | Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) |
EN IEC 61340-4-4:2018 | Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) |
I.S. EN 61340-4-4:2012 | ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) (IEC 61340-4-4:2012 (EQV)) |
DIN EN 12115:2011-04 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011 |
UNE-EN 60079-14:2016 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
BS EN 1010-1 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
BS EN 60079-14:2014 | Explosive atmospheres Electrical installations design, selection and erection |
UNI EN 1010-1 : 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
UNE-EN 50223:2016 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
CEN/TR 15339-3:2014 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units |
PREN 50050-3 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
PREN 50050-2 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
14/30316181 DC : 0 | BS EN 50628 - ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES |
S.R. CLC/TS 62603-1:2014 | INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS |
CEN/TR 16832 : 2015 COR 2015 | SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS) |
11/30248845 DC : 0 | BS EN 50050-2:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
CEI EN 62305-2 : 2013 | PROTECTION AGAINST LIGHTNING - PART 2: RISK MANAGEMENT |
BS EN 60079-10-1:2015 | Explosive atmospheres Classification of areas. Explosive gas atmospheres |
UNI EN 1127-1 : 2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
I.S. EN 1127-1:2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
PREN 50628 : DRAFT 2014 | ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES |
S.R. CEN/TR 15339-3:2014 | THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 3: TORCHES FOR THERMAL SPRAYING AND THEIR CONNECTION AND SUPPLY UNITS |
CEI EN 60079-29-2 : 2016 | EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN |
UNE-EN 50050-1:2014 | Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials |
I.S. EN 61936-1:2010 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
BS EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification |
BS EN 12779:2015 | Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements |
BS EN 61936-1 : 2010 | POWER INSTALLATIONS EXCEEDING 1 KV A.C - PART 1: COMMON RULES |
UNE-EN 61936-1:2012 | Power installations exceeding 1 kV a.c. -- Part 1: Common rules |
EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
UNE-EN 50177:2010 | Stationary electrostatic application equipment for ignitable coating powders - Safety requirements |
UNE-EN 60079-28:2016 | Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
PREN 1149-5 : DRAFT 2016 | PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 5: MATERIAL PERFORMANCE AND DESIGN REQUIREMENTS |
BS EN 50050-1:2013 | Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable liquid coating materials |
CEI EN 50050-3 : 2014 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
S.R. CEN/TR 16829:2016 | FIRE AND EXPLOSION PREVENTION AND PROTECTION FOR BUCKET ELEVATORS |
BS EN 62305-2:2012 | Protection against lightning Risk management |
I.S. EN 50050-3:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
UNE-EN 60079-29-2:2016 | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
BS EN 62657-1:2017 | Industrial communication networks. Wireless communication networks Wireless communication requirements and spectrum considerations |
I.S. EN 62657-1:2017 | INDUSTRIAL COMMUNICATION NETWORKS - WIRELESS COMMUNICATION NETWORKS - PART 1: WIRELESS COMMUNICATION REQUIREMENTS AND SPECTRUM CONSIDERATIONS |
EN 60079-18:2015/A1:2017 | EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' (IEC 60079-18:2014/A1:2017) |
I.S. EN 60079-14:2014 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION |
CLC/TR 60079-32-1:2015 | Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance |
I.S. EN 50223:2015 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
EN 61340-4-4:2012/A1:2015 | ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) (IEC 61340-4-4:2012) |
UNE-EN 12779:2016 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
BS EN 50628:2016 | Erection of electrical installations in underground mines |
EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
UNI EN 12115 : 2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
EN 62305-2:2012 | Protection against lightning - Part 2: Risk management |
EN 60079-17:2014 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
EN 50628:2016 | Erection of electrical installations in underground mines |
EN 60079-29-2:2015 | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
EN 50050-1:2013 | Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials |
EN 50050-2 : 2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
EN 62305-3:2011 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
EN 60079-32-2:2015 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
EN 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
IEC 60079-18:2014 RLV | Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
ISO 4225:1994 | Air quality General aspects Vocabulary |
IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
EN 60079-28:2015 | Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
IEC 60050-426:2008 | International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres |
EN 60079-31:2014 | Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
EN 60079-11:2012 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
ISO/IEC 80079-20-2:2016 | Explosive atmospheres Part 20-2: Material characteristics Combustible dusts test methods |
IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
IEC 60079-31:2013 | Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
IEC 61241-2-1:1994 | Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 1: Methods for determining the minimum ignition temperatures of dust |
EN 60079-2:2014/AC:2015 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.