EN 60728-5:2016
Current
The latest, up-to-date edition.
Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment
22-04-2016
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Methods of measurement
5 Performance requirements and recommendations
6 Equipment characteristics required to be met
7 Equipment characteristics required to be published
Annex A (normative) - Definition of the specified test
frequency range for return loss and noise figure
Annex B (informative) - Audio connector for European
system according to IEC 60130-9
Annex C (informative) - Selectivity diagram for adjacent
channel transmission
Annex D (informative) - Differences in some countries
Annex E (normative) - Correction factors for noise
Annex F (informative) - Digital signal level and bandwidth
Annex G (informative) - Minimum frequency distance of
converted satellite signals in the IF range
Annex H (informative) - Measurement errors which occur
due to mismatched equipment
Annex I (normative) - Correction factor for spectrum
analyser
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Annex ZB (normative) - Special national conditions
IEC 60728-5:2015 specifies the characteristics of equipment used in the headends of terrestrial broadcast and satellite receiving systems (without satellite outdoor units and without those broadband amplifiers in the headend as described in IEC 60728-3). It:- covers the frequency range 5 MHz to 3 000 MHz;- identifies performance requirements for certain parameters;- lays down data publication requirements for certain parameters;- stipulates methods of measurements;- introduces minimum requirements defining quality grades (Q-grades). This third edition cancels and replaces the second edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:- new text for the introduction, following the scope of IEC TC 100/TA 5;- introduction of IPTV to the scope;- headend specification for digital terrestrial TV signals according to the DVB-T2 standard;- headend specification for digital TV signals in cable networks according to the DVB-S2 standard.
Committee |
CLC/TC 209
|
DevelopmentNote |
Supersedes EN 50083-5. (08/2008) Supersedes UNE EN 50083-5. (05/2011)
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Current
|
Supersedes |
Standards | Relationship |
BS EN 60728-5:2008 | Identical |
NBN EN 60728-5 : 2016 | Identical |
NF EN 60728-5 : 2015 | Identical |
SN EN 60728-5 : 2016 | Identical |
IEC 60728-5:2015 | Identical |
NEN EN IEC 60728-5 : 2016 | Identical |
UNE-EN 60728-5:2016 | Identical |
VDE 0855-5 : 2016 | Identical |
DIN EN 60728-5 : 2016 | Identical |
PN EN 60728-5 : 2016 | Identical |
I.S. EN 60728-5:2016 | Identical |
CEI EN 60728-5 : 2016 | Identical |
BS EN 60728-5:2016 | Identical |
PNE-FprEN 60728-5 | Identical |
S.R. CLC/TR 50173-99-2:2010 | INFORMATION TECHNOLOGY - IMPLEMENTATION OF BCT APPLICATIONS USING CABLING IN ACCORDANCE WITH EN 50173-4 |
CEI CLC/TR 50083-10-1 : 2009 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10-1: GUIDELINES FOR THE IMPLEMENTATION OF RETURN PATHS IN CABLE NETWORKS |
UNE-EN 60728-3:2012 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks |
S.R. CLC/TR 50083-10-1:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10-1: GUIDELINES FOR THE IMPLEMENTATION OF RETURN PATHS IN CABLE NETWORKS |
UNE-EN 50083-2:2013 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
EN 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
EN 60728-10:2014 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths |
EN 50083-2:2012/A1:2015 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
PD CLC/TR 50173-99-2:2010 | Information technology. Implementation of BCT applications using cabling in accordance with EN 50173-4 |
BS EN 60728-1:2014 | Cable networks for television signals, sound signals and interactive services System performance of forward paths |
I.S. EN 60728-3:2011 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS |
CEI EN 50083-2 : 2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
CEI EN 60728-3 : 2011 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS |
CEI CLC/TR 50083-5-1 : 2010 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 5-1: IP GATEWAYS AND INTERFACES FOR HEADENDS |
CLC/TR 50173-99-2:2010 | Information technology - Implementation of BCT applications using cabling in accordance with EN 50173-4 |
PD CLC/TR 50083-10-1:2014 | Cable networks for television signals, sound signals and interactive services Guidelines for the implementation of return paths in cable networks |
BS EN 60728-3:2011 | Cable networks for television signals, sound signals and interactive services Active wideband equipment for cable networks |
BS EN 50083-2 : 2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
CLC/TR 50083-10-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 10-1: Guidelines for the implementation of return paths in cable networks |
BS EN 60728-10:2014 | Cable networks for television signals, sound signals and interactive services System performance for return paths |
I.S. EN 50083-2:2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
BS EN 60728-101:2017 | Cable networks for television signals, sound signals and interactive services System performance of forward paths loaded with digital channels only |
I.S. EN 60728-10:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10: SYSTEM PERFORMANCE FOR RETURN PATHS |
I.S. EN IEC 60728-3:2018 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS (TA 5) |
EN IEC 60728-3:2018 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks (TA 5) |
I.S. EN 60728-1:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 1: SYSTEM PERFORMANCE OF FORWARD PATHS |
IEC 60728-11:2016 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
TS 102 034 : 2.1.1 | DIGITAL VIDEO BROADCASTING (DVB); TRANSPORT OF MPEG-2 TS BASED DVB SERVICES OVER IP BASED NETWORKS |
IEC 61169-8:2007 | Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 Ω (type BNC) |
EN 61319-1:1996/A11:1999 | INTERCONNECTIONS OF SATELLITE RECEIVING EQUIPMENT - PART 1: EUROPE |
EN 50083-9:2002 | Cable networks for television signals, sound signals and interactive services - Part 9: Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams |
ISO/IEC 13818-1:2015 | Information technology Generic coding of moving pictures and associated audio information Part 1: Systems |
EN 300 744 : 1.6.2 | DIGITAL VIDEO BROADCASTING (DVB); FRAMING STRUCTURE, CHANNEL CODING AND MODULATION FOR DIGITAL TERRESTRIAL TELEVISION |
EN 300 421 : 1.1.2 | DIGITAL VIDEO BROADCASTING (DVB): FRAMING STRUCTURE, CHANNEL CODING AND MODULATION FOR 11/12 GHZ SATELLITE SERVICES |
IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
ISO/IEC 13818-2:2013 | Information technology — Generic coding of moving pictures and associated audio information — Part 2: Video |
ETS 300 457 : 20001 | SATELLITE EARTH STATIONS AND SYSTEMS (SES) - TEST METHODS FOR TELEVISION RECEIVE ONLY (TVRO) OPERATING IN THE 11/12 GHZ FREQUENCY BANDS |
EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60728-3:2010 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks |
EN 61169-8:2007 | Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC) |
IEC 60130-9:2011 | Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment |
TS 102 831 : 1.2.1 | DIGITAL VIDEO BROADCASTING (DVB); IMPLEMENTATION GUIDELINES FOR A SECOND GENERATION DIGITAL TERRESTRIAL TELEVISION BROADCASTING SYSTEM (DVB-T2) |
EN 300 429 : 1.2.1 | DIGITAL VIDEO BROADCASTING (DVB): FRAMING STRUCTURE, CHANNEL CODING AND MODULATION FOR CABLE SYSTEMS |
EN 50083-2:2012/A1:2015 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
IEC 60244-5:1992 | Methods of measurement for radio transmitters - Part 5: Performance characteristics of television transmitters |
IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
IEC 60728-2:2010 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
ES 200 800 : 1.3.1 | DIGITAL VIDEO BROADCASTING (DVB); DVB INTERACTION CHANNEL FOR CABLE TV DISTRIBUTION SYSTEMS (CATV) |
EN 60728-11:2017 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
EN 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
EN 60068-2-40:1999 | Environmental testing - Part 2: Tests - Test Z/AM: Combined cold/low air pressure tests |
ETS 300 249 : 20001 | SATELLITE EARTH STATIONS (SES); TELEVISION RECEIVE-ONLY (TVRO) EQUIPMENT USED IN THE BROADCASTING SATELLITE SERVICE (BSS) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
CLC/TR 50083-5-1:2009 | Cable networks for television signals, sound signals and interactive services - Part 5-1: IP gateways and interfaces for headends |
ETS 300 158 : 20001 | SATELLITE EARTH STATIONS (SES); TELEVISION RECEIVE-ONLY (TVRO-FSS) SATELLITE EARTH STATIONS OPERATING IN THE 11/12 GHz FSS BANDS |
ETS 300 163 : 20001 | TELEVISION SYSTEMS - NICAM 728: SPECIFICATION FOR TRANSMISSION OF TWO-CHANNEL DIGITAL SOUND WITH TERRESTRIAL TELEVISION SYSTEMS B, G, H, I AND L |
IEC 61319-1:1995 | Interconnections of satellite receiving equipment - Part 1: Europe |
EN 60130-9:2011 | Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment |
ISO/IEC 13818-3:1998 | Information technology Generic coding of moving pictures and associated audio information Part 3: Audio |
EN 61169-2:2007 | Radio-frequency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 |
IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
TR 101 211 : 1.9.1 | DIGITAL VIDEO BROADCASTING (DVB); GUIDELINES ON IMPLEMENTATION AND USAGE OF SERVICE INFORMATION (SI) |
EN 302 307 : 1.3.1 | DIGITAL VIDEO BROADCASTING (DVB); SECOND GENERATION FRAMING STRUCTURE, CHANNEL CODING AND MODULATION SYSTEMS FOR BROADCASTING, INTERACTIVE SERVICES, NEWS GATHERING AND OTHER BROADBAND SATELLITE APPLICATIONS (DVB-S2) |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
EN 60244-5:1994 | Methods of measurement for radio transmitters - Part 5: Performance characteristics for television transmitters |
EN 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
ISO/IEC 13818-4:2004 | Information technology — Generic coding of moving pictures and associated audio information — Part 4: Conformance testing |
EN 300 473 : 1.1.2 | DIGITAL VIDEO BROADCASTING (DVB); SATELLITE MASTER ANTENNA TELEVISION (SMATV) DISTRIBUTION SYSTEMS |
EN 302 755 : 1.4.1 | DIGITAL VIDEO BROADCASTING (DVB); FRAME STRUCTURE CHANNEL CODING AND MODULATION FOR A SECOND GENERATION DIGITAL TERRESTRIAL TELEVISION BROADCASTING SYSTEM (DVB-T2) |
IEC 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
IEC 61169-2:2007 | Radio-frenquency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 |
EN 60068-2-31:2008 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
EN 300 468 : 1.15.1 | DIGITAL VIDEO BROADCASTING (DVB); SPECIFICATION FOR SERVICE INFORMATION (SI) IN DVB SYSTEMS |
IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.