EN 61076-2-101:2012
Current
The latest, up-to-date edition.
Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
03-08-2012
FOREWORD
1 Scope
2 Normative references
3 Technical information
4 Dimensional information
5 Characteristics
6 Test schedule
Annex A (informative) - Diameter of the female connector body
Annex B (informative) - Steel conduit thread, sizes
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
IEC 61076-2-101:2012 describes M12 circular connectors typically used for industrial process measurement and control. These connectors consist of fixed and free connectors either rewireable or non-rewireable, with screw-locking. The connectors with glass to metal seal are fixed connectors only which consist of fixed glass to metal sealed styles with rewireable male contacts and are intermateable with corresponding free connectors according to this International Standard. Male connectors have round contacts 0,6 mm, 0,76 mm, 0,8 mm and 1,0 mm. The different codings prevent the mating of these coded male or female connectors to any other interfaces and cross-mating between the different codings. This third edition cancels and replaces the second edition published in 2008 and its corrigendum published in 2010. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - The drawings of some styles have been corrected, - A new style with maximum 17 poles, with A-coding, has been added, as new applications for the industrial process measurement and control require a high number of poles in M12 circular connectors. The existing styles and dimensions which were specified in IEC 61076-2-101 Ed.2 are further applicable for the added interface dimension of the 17 poles versions, - Removal of the type designation and ordering information, former Tables 6 and 7 have been updated accordingly and - Inclusion of the technical content of IEC PAS 61076-2-108, which will be withdrawn after publication of this International Standard. The drawings have been updated and correction to the title of Figure 9 was made. Keywords: M12 connectors, Circular connector
| Committee |
CLC/SR 48B
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 61076 2 101 : 2013 | Identical |
| IEC 61076-2-101:2012 | Identical |
| NBN EN 61076 2-101 : 2012 | Identical |
| NEN EN IEC 61076-2-101 : 2012 | Identical |
| I.S. EN 61076-2-101:2012 | Identical |
| OVE/ONORM EN 61076-2-101 : 2013 | Identical |
| PN EN 61076-2-101 : 2012 | Identical |
| SN EN 61076-2-101 : AMD 1 2006 | Identical |
| DIN EN 61076-2-101 : 2013 | Identical |
| VDE 0687-76-2-101 : 2013 | Identical |
| UNE-EN 61076-2-101:2012 | Identical |
| DIN EN 61076-2-101 Berichtigung 1:2021-03 | Identical |
| VDE 0687-76-2-101 Berichtigung 1:2021-03 | Identical |
| BS EN 61076-2-101:2012 | Identical |
| CEI EN 61076-2-101 : 2013 | Identical |
| BS EN IEC 60512-8-3:2018 | Identical |
| PNE-FprEN 61076-2-101 | Identical |
| CEI EN 62026-7 : 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET |
| BS EN 60512-29-100:2015 | Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 500 MHz on M12 style connectors. Tests 29a to 29g |
| BS EN 61375-3-4 : 2014 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-4: ETHERNET CONSIST NETWORK (ECN) (IEC 61375-3-4:2014) |
| CEI EN 61869-6 : 1ED 2017 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| BS EN 62952-3:2017 | Power sources for a wireless communication device Generic energy harvesting adapter module |
| CEI EN 61754-27 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 27: TYPE M12-FO CONNECTOR FAMILY |
| CEI EN 61375-3-4 : 2014 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-4: ETHERNET CONSIST NETWORK (ECN) |
| I.S. EN 61869-6:2016 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| CEI EN 60512-29-100 : 2016 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G |
| EN 61375-2-5:2015 | Electronic railway equipment - Train communication network (TCN) - Part 2-5: Ethernet train backbone |
| EN 61754-27 : 2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 27: TYPE M12-FO CONNECTOR FAMILY (IEC 61754-27:2013) |
| EN 61869-6:2016 | Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers |
| EN 60512-29-100:2015 | Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g |
| I.S. EN 61754-27:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 27: TYPE M12-FO CONNECTOR FAMILY (IEC 61754-27:2013 (EQV)) |
| BS EN 62026-7:2013 | Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) CompoNet |
| BS EN 61754-27:2013 | Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type M12-FO connector family |
| I.S. EN 60512-29-100:2015 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G |
| CEI EN 61131-9 : 2014 | PROGRAMMABLE CONTROLLERS - PART 9: SINGLE-DROP DIGITAL COMMUNICATION INTERFACE FOR SMALL SENSORS AND ACTUATORS (SDCI) |
| I.S. EN 62026-7:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET (IEC 62026-7:2010 (MOD)) |
| I.S. EN 61918:2013 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES |
| BS EN 61869-6:2016 | Instrument transformers Additional general requirements for low-power instrument transformers |
| CEI EN 62952-3 : 1ED 2018 | POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 3: GENERIC ENERGY HARVESTING ADAPTOR MODULE |
| BS EN 61375-2-5:2015 | Electronic railway equipment. Train communication network (TCN) Ethernet train backbone |
| BS EN 61076-2-109:2014 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz |
| UNI CEN/TS 13149-8 : 2013 | PUBLIC TRANSPORT - ROAD VEHICLE SCHEDULING AND CONTROL SYSTEMS - PART 8: PHYSICAL LAYER FOR IP COMMUNICATION |
| I.S. EN 61076-2-109:2014 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M 12 X 1 SCREW-LOCKING, FOR DATA TRANSMISSION FREQUENCIES UP TO 500 MHZ |
| BS EN 50173-1:2011 | Information technology. Generic cabling systems General requirements |
| EN 50173-1:2011 | Information technology - Generic cabling systems - Part 1: General requirements |
| BS EN 61131-9:2013 | Programmable controllers Single-drop digital communication interface for small sensors and actuators (SDCI) |
| CEI EN 50173-1 : 2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61375-2-5:2015 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-5: ETHERNET TRAIN BACKBONE |
| S.R. CEN/TS 13149-8:2013 | PUBLIC TRANSPORT - ROAD VEHICLE SCHEDULING AND CONTROL SYSTEMS - PART 8: PHYSICAL LAYER FOR IP COMMUNICATION |
| I.S. EN 61375-3-4:2014 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-4: ETHERNET CONSIST NETWORK (ECN) |
| BS EN 61918:2013 | Industrial communication networks. Installation of communication networks in industrial premises |
| I.S. EN 50173-1:2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| PD CEN/TS 13149-8:2013 | Public transport. Road vehicle scheduling and control systems Physical layer for IP communication |
| I.S. EN 61131-9:2013 | PROGRAMMABLE CONTROLLERS - PART 9: SINGLE-DROP DIGITAL COMMUNICATION INTERFACE FOR SMALL SENSORS AND ACTUATORS (SDCI) |
| I.S. EN 62952-3:2017 | POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 3: GENERIC ENERGY HARVESTING ADAPTOR MODULE |
| EN 61918:2013/AC:2014 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED) |
| EN 61076-2-109:2014 | Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz |
| CEN/TS 13149-8:2013 | Public transport - Road vehicle scheduling and control systems - Part 8: Physical layer for IP communication |
| EN 61375-3-4:2014/A11:2017 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-4: ETHERNET CONSIST NETWORK (ECN) |
| EN 62952-3:2017 | Power sources for a wireless communication device - Part 3: Generic energy harvesting adaptor module |
| EN 61131-9 : 2013 | Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) |
| EN 62026-7:2013 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet |
| IEC 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
| EN 60068-2-60:2015 | Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test |
| IEC 61984:2008 | Connectors - Safety requirements and tests |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| EN 60512-1-100:2012 | Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications |
| IEC 60068-2-60:2015 RLV | Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test |
| EN ISO 1302:2002 | Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002) |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| EN 60998-2-1:2004 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units |
| EN 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60512-1-100:2012 | Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications |
| IEC 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
| EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| EN 61984:2009 | Connectors - Safety requirements and tests |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60050-581:2008 | International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
| IEC 60998-2-1:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units |
| EN 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.