• Shopping Cart
    There are no items in your cart

EN 61300-3-2:2009

Current

Current

The latest, up-to-date edition.

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device

Published date

05-03-2009

Sorry this product is not available in your region.

1 Scope and object
2 Normative references
3 Measurement methods
  3.1 All states method
  3.2 Mueller matrix method
4 Apparatus
  4.1 Optical source (S)
  4.2 Temporary joint (TJ)
  4.3 Polarization state change system (PSCS)
      4.3.1 All states method
      4.3.2 Mueller matrix method
  4.4 Reference branching device (RBD) (optional)
  4.5 Detectors (D)
  4.6 Data read-out/recording/processing devices
5 Procedure
  5.1 Preparation of specimens
  5.2 Pre-conditioning
  5.3 Initial measurements
  5.4 Test precautions
  5.5 Reference measurement
  5.6 Device measurement
6 Data analysis
  6.1 All states method
  6.2 Mueller matrix method
7 Details to be specified
Annex A (informative) - Measurement uncertainties
Annex ZA (normative) - Normative references to international
         publications with their corresponding European
         publications

IEC 61300-3-2:2009(E) specifies measurement methods to determine the dependence of loss in a single-mode fibre optic device to changes in polarization. This procedure focuses on measurements with a fixed wavelength source; therefore, this procedure is applicable to devices whose properties at a single wavelength can represent those over the broader wavelength band. Typical examples of such devices are single-mode interconnecting devices and passive components, including connectors, splices, branching devices, attenuators, isolators, and switches. The maximum observed variation in transmission loss is referred to as polarization-dependent-loss (PDL). This edition includes both the all-states method of the previous edition as well as the Mueller matrix method from IEC 61300-3-12.

Committee
CLC/TC 86BXA
DevelopmentNote
Supersedes EN 61300-3-12. (04/2009) Supersedes UNE EN 61300-3-12 & UNE EN 61300-3-2. (02/2010)
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current
Supersedes

BS EN 61753-071-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C. Controlled environments
I.S. EN 61753-051-3:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 051-3: SINGLE-MODE FIBRE, PLUG STYLE FIXED ATTENUATORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT (IEC 61753-051-3:2013 (EQV))
I.S. EN 61753-053-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 053-2: NON-CONNECTORIZED SINGLE-MODE FIBRE, ELECTRICALLY CONTROLLED, VARIABLE OPTICAL ATTENUATOR FOR CATEGORY C - CONTROLLED ENVIRONMENTS
BS EN 61753-053-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C. Controlled environments
BS EN 61300-3-50:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Crosstalk for optical spatial switches
I.S. EN 62343-3-1:2016 DYNAMIC MODULES - PART 3-1: PERFORMANCE SPECIFICATION TEMPLATES - DYNAMIC CHANNEL EQUALIZERS
BS EN 61753-381-2:2016 Fibre optic interconnecting devices and passive components. Performance standard Cyclic arrayed waveguide grating. Category C (controlled environment)
BS EN 61753-084-2:2008 Fibre optic interconnecting devices and passive components performance standard Non connectorised single-mode 980/1550 nm WWDM devices for category C. Controlled environment
I.S. EN 61753-086-2:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
I.S. EN 61753-031-3:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 031-3: NON-CONNECTORIZED SINGLEMODE 1N AND 2N NON-WAVELENGTH-SELECTIVE BRANCHING DEVICES FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
BS EN 61300-3-29:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Spectral transfer characteristics of DWDM devices
I.S. EN 61753-083-2:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 083-2: NON-CONNECTORISED SINGLE MODE FIBRE OPTIC C-BAND/L-BAND WDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
BS EN 61753-083-2:2008 Fibre optic interconnecting devices and passive components performance standard Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C. Controlled environment
CEI EN 61753-057-2 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 057-2: SINGLE MODE FIBRE PLUG-RECPTACLE STYLE OPTICAL FUSE FOR CATEGORY C - CONTROLLED ENVIRONMENT
CEI EN 62343-3-1 : 2011 DYNAMIC MODULES - PART 3-1: PERFORMANCE SPECIFICATION TEMPLATES - DYNAMIC CHANNEL EQUALIZERS
I.S. EN 61753-091-3:2004 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 091-3: SINGLE-MODE FIBRE OPTIC PIGTAILED STYLE CIRCULATORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
I.S. EN 61753-056-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 056-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL FUSE FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-056-2:2012 (EQV))
I.S. EN 62343-1-3:2013 DYNAMIC MODULES - PART 1-3: PERFORMANCE STANDARDS - DYNAMIC GAIN TILT EQUALIZER (NON-CONNECTORIZED) (IEC 62343-1-3:2012 (EQV))
I.S. EN 61753-052-6:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 052-6: SINGLE-MODE FIBRE NON-CONNECTORIZED FIXED ATTENUATOR - CATEGORY O IN OUTSIDE PLANT ENVIRONMENT
I.S. EN 61753-381-2:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 381-2: CYCLIC ARRAYED WAVEGUIDE GRATING - CATEGORY C (CONTROLLED ENVIRONMENT)
I.S. EN 61753-141-2:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 141-2: FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATOR USING SINGLE-MODE DISPERSION COMPENSATING FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENTS
I.S. EN 61753-031-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 031-2: NON-CONNECTORIZED SINGLE-MODE 1XN AND 2XN NON-WAVELENGTH-SELECTIVE BRANCHING DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
I.S. EN 61300-3-4:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-4: EXAMINATIONS AND MEASUREMENTS - ATTENUATION (IEC 61300-3-4:2012 (EQV))
I.S. EN 61300-3-29:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-29: EXAMINATIONS AND MEASUREMENTS - SPECTRAL TRANSFER CHARACTERISTICS OF DWDM DEVICES
I.S. EN 61753-031-6:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 031-6: NON-CONNECTORIZED SINGLE-MODE 1XN AND 2XN NON-WAVELENGTHSELECTIVE BRANCHING DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
CEI EN 62343-1-3 : 2014 DYNAMIC MODULES - PART 1-3: PERFORMANCE STANDARDS - DYNAMIC GAIN TILT EQUALIZER (NON-CONNECTORIZED)
I.S. EN 61753-091-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 091-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC PIGTAILED CIRCULATORS FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-091-2:2012 (EQV))
I.S. EN 61753-061-3:2004 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 061-3: SINGLE MODE FIBRE OPTIC PIGTAILED STYLE ISOLATORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
EN 61753-052-6:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single-mode fibre non-connectorized fixed attenuator - Category O in outside plant environment
EN 61300-3-32 : 2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-32: EXAMINATIONS AND MEASUREMENTS - POLARIZATION MODE DISPERSION MEASUREMENT FOR PASSIVE OPTICAL COMPONENTS
EN 61753-143-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C - Controlled environment
EN 62343-3-3:2014 Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches
EN 61753-087-6:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment
EN 61753-092-6:2007/corrigendum:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 092-6: NON-CONNECTORIZED SINGLE-MODE CIRCULATORS FOR CATEGORY O - UNCONTROLLED ENVIRONMENT AND SEQUENTIAL TEST
EN 61753-031-3:2015 Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U - Uncontrolled environment
EN 61753-141-2:2011 Fibre optic interconnecting devices and passive components - Performance standard - Part 141-2: Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C - Controlled environments
EN 61753-056-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 056-2: Single mode fibre pigtailed style optical fuse for category C - Controlled environment
EN 62343-1-2:2015 Dynamic modules - Part 1-2: Performance standards - Tuneable chromatic dispersion compensator (non-connectorized)
EN 61753-053-3:2004 Fibre optic interconnecting devices and passive components performance standard - Part 053-3: Continuously variable attenuators for category U - Uncontrolled environment
EN 61753-057-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C - Controlled environment
EN 61753-059-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 059-2: Single-mode fibre plug-receptacle style optical limiter for category C - Controlled environment
EN 61753-031-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 031-2: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category C - Controlled environment
EN 61753-382-2:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment
EN 61753-084-2:2008 Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment
EN 61753-031-6:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 031-6: Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for Category O - Uncontrolled environment
EN 61753-091-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 091-2: Non-connectorized single-mode fibre optic pigtailed circulators for category C - Controlled environment
EN 61753-051-3:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 051-3: Single-mode fibre, plug style fixed attenuators for category U - Uncontrolled environment
EN 61753-052-3:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 052-3: Single-mode fibre non-connectorized fixed attenuator - Category U in uncontrolled environment
EN 61753-086-2:2009 Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment
EN 61753-091-3:2004 Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single-mode fibre optic pigtailed style circulators for category U - Uncontrolled environment
EN 62343-1-3:2013 Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer (non-connectorized)
CEI EN 61753-092-6 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 092-6: NON-CONNECTORIZED SINGLE-MODE CIRCULATORS FOR CATEGORY O - UNCONTROLLED ENVIRONMENT AND SEQUENTIAL TEST
I.S. EN 61753-059-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 059-2: SINGLE-MODE FIBRE PLUG-RECEPTACLE STYLE OPTICAL LIMITER FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-059-2:2013 (EQV))
BS EN 61753-381-6:2016 Fibre optic interconnecting devices and passive components. Performance standard Cyclic arrayed waveguide grating. Category O (uncontrolled environment)
BS EN 61753-057-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Single mode fibre plug-receptacle style optical fuse for category C. Controlled environment
I.S. EN 62343-1-2:2015 DYNAMIC MODULES - PART 1-2: PERFORMANCE STANDARDS - TUNEABLE CHROMATIC DISPERSION COMPENSATOR (NON-CONNECTORIZED)
BS EN 61753-052-6:2016 Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre non-connectorized fixed attenuator. Category O in outside plant environment
BS EN 61753-382-2:2016 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C. Controlled environment
BS EN 61753-053-3:2004 Fibre optic interconnecting devices and passive components performance standard Continuously variable attenuators for category U - Uncontrolled environment
BS EN 61753-041-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode OTDR reflecting device for category C. Controlled environment
BS EN 62343-3-3:2014 Dynamic modules Performance specification templates. Wavelength selective switches
BS EN 61753-031-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for Category C. Controlled environment
BS EN 61753-089-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C. Controlled environment
BS EN 61753-031-3:2015 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U. Uncontrolled environment
CEI EN 61753-087-2 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
CEI EN 61753-086-6 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 086-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM AND 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
CEI EN 61753-091-2 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 091-2: NON-CONNECTORISED SINGLE-MODE FIBRE OPTIC PIGTAILED CIRCULATORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
I.S. EN 61753-071-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 071-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC 1 X 2 AND 2 X 2 SPATIAL SWITCHES FOR CATEGORY C - CONTROLLED ENVIRONMENTS
CEI EN 61753-083-2 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 083-2: NON-CONNECTORISED SINGLE-MODE FIBRE OPTIC C-BAND/L-BAND WDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
I.S. EN 61753-087-6:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT (IEC 61753-087-6:2012 (EQV))
CEI EN 61753-143-2 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 143-2: OPTICAL PASSIVE VIPA-BASED DISPERSION COMPENSATOR OF SINGLE-MODE FIBRE TRANSMISSION FOR CATEGORY C - CONTROLLED ENVIRONMENTS
CEI EN 61753-062-6 : 2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 062-6: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC PIGTAILED ISOLATORS FOR CATEGORY O - UNCONTROLLED ENVIRONMENT AND SEQUENTIAL TEST
I.S. EN 61753-041-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 041-2: NON-CONNECTORIZED SINGLE-MODE OTDR REFLECTING DEVICE FOR CATEGORY C - CONTROLLED ENVIRONMENT
CEI EN 61300-3-4 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-4: EXAMINATIONS AND MEASUREMENTS - ATTENUATION
BS EN 62343-3-1:2010 Dynamic modules Performance specification templates. Dynamic channel equalizers
BS EN 61753-086-2:2009 Fibre optic interconnecting devices and passive components performance standard Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C. Controlled environment
BS EN 61753-081-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C. Controlled environments
BS EN 61753-143-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C. Controlled environment
CEI EN 61753-052-6 : 1ED 2017 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 052-6: SINGLE-MODE FIBRE NONCONNECTORIZED FIXED ATTENUATOR - CATEGORY O IN OUTSIDE PLANT ENVIRONMENT
BS EN 61753-052-3:2016 Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre non-connectorized fixed attenuator. Category U in uncontrolled environment
BS EN 61753-031-6:2014 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for Category O. Uncontrolled environment
BS EN 61753-059-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre plug-receptacle style optical limiter for category C. Controlled environment
CEI EN 61753-052-3 : 2004 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 052-3: SINGLE-MODE FIBRE NONCONNECTORIZED FIXED ATTENUATOR - CATEGORY U IN UNCONTROLLED ENVIRONMENT
CEI EN 61753-087-6 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
BS EN 62343-1-2:2015 Dynamic modules Performance standards. Tuneable chromatic dispersion compensator (non-connectorized)
CEI EN 61300-3-50 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-50: EXAMINATIONS AND MEASUREMENTS - CROSSTALK FOR OPTICAL SPATIAL SWITCHES
I.S. EN 61753-081-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 081-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC MIDDLE-SCALE 1 X N DWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENTS
I.S. EN 61753-058-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 058-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL POWER LIMITER FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-058-2:2013 (EQV))
CEI EN 61753-141-2 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 141-2: FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATOR USING SINGLE-MODE DISPERSION COMPENSATING FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENTS
I.S. EN 61753-086-6:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 086-6: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM AND 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
CEI EN 61753-051-3 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 051-3: SINGLE-MODE FIBRE PLUG STYLE OPTICAL ATTENUATOR FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
EN 61753-061-2:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Non-connectorized single-mode fibre optic pigtailed isolators for category C - Controlled environment
EN 61753-071-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments
EN 61753-042-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C - Controlled environments
EN 61300-3-4:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation
I.S. EN 61753-052-3:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 052-3: SINGLE-MODE FIBRE NONCONNECTORIZED FIXED ATTENUATOR - CATEGORY U IN UNCONTROLLED ENVIRONMENT
BS EN 61753-051-3:2013 Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre, plug style fixed attenuators for category U. Uncontrolled environment
CEI EN 61753-086-2 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490 / 1550 NM DOWNSTREAM 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
BS EN 61753-092-6:2007 Fibre optic interconnecting devices and passive components performance standard Non-connectorized single-mode circulators for category O. Uncontrolled environment and sequential test
BS EN 61753-062-6:2008 Fibre optic interconnecting devices and passive components performance standard Non-connectorized single-mode fibre optic pigtailed isolators for category O. Uncontrolled environment and sequential test
I.S. EN 61753-092-6:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 092-6: NON-CONNECTORIZED SINGLE-MODE CIRCULATORS FOR CATEGORY O - UNCONTROLLED ENVIRONMENT AND SEQUENTIAL TEST
CEI EN 61753-056-2 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 056-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL FUSE FOR CATEGORY C - CONTROLLED ENVIRONMENT
BS EN 62522:2014 Calibration of tuneable laser sources
BS EN 61300-3-32:2006 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Polarization mode dispersion measurement for passive optical components
BS EN 61753-058-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Single mode fibre pigtailed style optical power limiter for category C. Controlled environment
CEI EN 61753-061-2 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 061-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC PIGTAILED ISOLATORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
BS EN 61300-3-4:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Attenuation
CEI EN 61753-084-2 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 084-2: NON CONNECTORISED SINGLE-MODE 980/1550 NM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
CEI EN 61753-058-2 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 058-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL POWER LIMITER FOR CATEGORY C - CONTROLLED ENVIRONMENT
I.S. EN 61753-057-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 057-2: SINGLE MODE FIBRE PLUG-RECEPTACLE STYLE OPTICAL FUSE FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-057-2:2012 (EQV))
I.S. EN 61753-042-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 042-2: PLUG-PIGTAIL-STYLE AND PLUG-RECEPTACLE-STYLE OTDR REFLECTING DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENTS
CEI EN 61300-3-29 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-29: EXAMINATIONS AND MEASUREMENTS - SPECTRAL TRANSFER CHARACTERISTICS OF DWDM DEVICES
I.S. EN 61753-381-6:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 381-6: CYCLIC ARRAYED WAVEGUIDE GRATING - CATEGORY O (UNCONTROLLED ENVIRONMENT)
UNE-EN 61300-3-4:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation
EN 61753-083-2:2008 Fibre optic interconnecting devices and passive components performance standard - Part 083-2: Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C - Controlled environment
EN 61753-086-6:2011 Fibre optic interconnecting devices and passive components - Performance standard - Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment
BS EN 61753-056-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Single mode fibre pigtailed style optical fuse for category C. Controlled environment
BS EN 61753-087-2:2011 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C. Controlled environment
BS EN 62343-1-3:2013 Dynamic modules Performance standards. Dynamic gain tilt equalizer (non-connectorized)
I.S. EN 61753-089-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 089-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL OTDR MONITORING WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-089-2:2013 (EQV))
BS EN 61753-141-2:2011 Fibre optic interconnecting devices and passive components. Performance standard Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C. Controlled environments
BS EN 61753-061-3:2004 Fibre optic interconnecting devices and passive components performance standard Single-mode fibre optic pigtailed style isolators for category U. Uncontrolled environment
BS EN 61753-086-6:2011 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional 1490 / 1550 nm downstream and 1310 nm upstream WWDM devices for category O. Uncontrolled environment
BS EN 61753-091-3:2004 Fibre optic interconnecting devices and passive components performance standards. Performance standard Single-mode fibre optic pigtailed style circulators for category U. - Uncontrolled environment
BS EN 61753-091-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre optic pigtailed circulators for category C. Controlled environment
BS EN 61753-087-6:2012 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O. Uncontrolled environment
BS EN 61753-061-2:2012 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre optic pigtailed isolators for category C. Controlled environment
BS EN 61753-042-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C. Controlled environments
CEI EN 61300-3-32 : 2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-32: EXAMINATIONS AND MEASUREMENTS - POLARISATION MODE DISPERSION MEASUREMENT FOR PASSIVE OPTICAL COMPONENTS
CEI EN 61753-089-2 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 089-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL OTDR MONITORING WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
I.S. EN 61300-3-50:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-50: EXAMINATIONS AND MEASUREMENTS - CROSSTALK FOR OPTICAL SPATIAL SWITCHES (IEC 61300-3-50:2013 (EQV))
I.S. EN 61753-062-6:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 062-6: NON-CONNECTORIZED SINGLE MODE FIBRE OPTIC PIGTAILED ISOLATORS FOR CATEGORY O - UNCONTROLLED ENVIRONMENT AND SEQUENTIAL TEST
I.S. EN 61753-084-2:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 084-2: NON CONNECTORISED SINGLE-MODE 980/1550 NM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
CEI EN 61753-059-2 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 059-2: SINGLE-MODE FIBRE PLUG-RECEPTACLE STYLE OPTICAL LIMITER FOR CATEGORY C - CONTROLLED ENVIRONMENT
I.S. EN 61753-143-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 143-2: OPTICAL PASSIVE VIPA-BASED DISPERSION COMPENSATOR OF SINGLE-MODE FIBRE TRANSMISSION FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-143-2:2012 (EQV))
I.S. EN 61753-382-2:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 382-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL G-PON-NGA WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
I.S. EN 61753-087-2:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
I.S. EN 62343-3-3:2014 DYNAMIC MODULES - PART 3-3: PERFORMANCE SPECIFICATION TEMPLATES - WAVELENGTH SELECTIVE SWITCHES
I.S. EN 61753-061-2:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 061-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC PIGTAILED ISOLATORS FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-061-2:2012 (EQV))
CEI EN 62343-1-2 : 2016 DYNAMIC MODULES - PART 1-2: PERFORMANCE STANDARDS - TUNEABLE CHROMATIC DISPERSION COMPENSATOR (NON-CONNECTORIZED)
I.S. EN 61746:2005 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR)
EN 61300-3-50:2013/AC:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-50: EXAMINATIONS AND MEASUREMENTS - CROSSTALK FOR OPTICAL SPATIAL SWITCHES (IEC 61300-3-50:2013)
EN 61753-381-6:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment)
EN 61753-053-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments
EN 61753-061-3:2004 Fibre optic interconnecting devices and passive components performance standard - Part 061-3: Single mode fibre optic pigtailed style isolators for category U - Uncontrolled environment
EN 61746:2005 Calibration of optical time-domain reflectometers (OTDR)
EN 62343-3-1:2016 Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers
EN 61753-089-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment
EN 61753-062-6:2008 Fibre optic interconnecting devices and passive components performance standard - Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O - Uncontrolled environment and sequential test
EN 61753-381-2:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment)
EN 61753-087-2:2011 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled environment
EN 62522:2014 Calibration of tuneable laser sources
EN 61753-058-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 058-2: Single mode fibre pigtailed style optical power limiter for category C - Controlled environment
EN 61300-3-29:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices
EN 61753-081-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments
EN 61753-041-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment

IEC 61300-3-29:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices
EN 61300-3-29:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.