EN 61347-2-9:2013
Current
The latest, up-to-date edition.
Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
11-01-2013
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General notes on tests
6 Classification
7 Marking
8 Protection against accidental contact with live parts
9 Terminals
10 Provisions for earthing
11 Moisture resistance and insulation
12 Electric strength
13 Thermal endurance test for windings
14 Electromagnetic controlgear heating
15 High-voltage impulse testing
16 Fault conditions
17 Construction
18 Creepage distances and clearances
19 Screws, current-carrying parts and connections
20 Resistance to heat, fire and tracking
21 Resistance to corrosion
22 No-load output voltage
Annex A (normative) - Test to establish whether a conductive
part is a live part which may cause an electric shock
Annex B (normative) - Particular requirements for thermally
protected lamp electromagnetic controlgear
Annex C (normative) - Particular requirements for electronic
lamp controlgear with means of protection
against overheating
Annex D (normative) - Requirements for carrying out the
heating tests of thermally protected lamp
electromagnetic controlgear
Annex E (normative) - Use of constant S other than 4500
in tw tests
Annex F (normative) - Draught-proof enclosure
Annex G (normative) - Explanation of the derivation of
the values of pulse voltages
Annex H (normative) - Tests
Annex I (normative) - Method for selection of varistors
Annex J (informative) - Explanation of electromagnetic
controlgear temperatures
Annex K (normative) - Additional requirements for built-in
electromagnetic controlgear with double or
reinforced insulation
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
IEC 61347-2-9:2012 series specifies particular safety requirements for electromagnetic controlgear for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps. The standard covers inductive-type electromagnetic controlgear for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, associated with discharge lamps, having rated wattages, dimensions and characteristics as specified in IEC 60188, IEC 60192 and IEC 60662. This second edition cancels and replaces the first edition published in 2000, Amendment 1:2003 and Amendment 2:2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the addition of a new Clause 14; b) the word 'ballast' is changed to 'electromagnetic controlgear'. This publication is to be read in conjunction with IEC 61347-1:2007.
DevelopmentNote |
To be used in conjunction with EN 61347-1. (01/2004) Together with EN 61347-1 and parts 2-1, 2-2, 2-3, 2-4, 2-5, 2-6, 2-7 and 2-8 of EN 61347 supersedes EN 60920, EN 60922, EN 60924, EN 60926, EN 60928 and EN 61046. (07/2005)
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Current
|
Supersedes |
Standards | Relationship |
I.S. EN 61347-2-9:2013 | Identical |
SN EN 61347-2-9 : 2006 | Identical |
BS EN 61347-2-9:2013 | Identical |
UNE-EN 61347-2-9:2013 | Identical |
NEN EN IEC 61347-2-9 : 2013 | Identical |
DIN EN 61347-2-9 : 2013 | Identical |
NBN EN 61347 2-9 : 2013 | Identical |
CEI EN 61347-2-9 : 2013 | Identical |
VDE 0712-39 : 2013 | Identical |
NF EN 61347-2-9 : 2013 | Identical |
PN EN 61347-2-9 : 2013 | Identical |
IEC 61347-2-9:2012 | Identical |
I.S. EN 61347-1:2015 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
DIN EN 12665:2016-09 (Draft) | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
BS EN 61347-1:2015 | Lamp controlgear General and safety requirements |
EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
EN 60927:2007/A1:2013 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS (IEC 60927:2007/A1:2013 (34C/951/CDV)) |
BS EN 60923:2005 | Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements |
I.S. EN 60923:2005 | AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS |
BS EN 60927 : 2007 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS |
I.S. EN 60079-15:2010 | EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N' |
I.S. EN 12665:2011 | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
CEI EN 60079-15 : 2012 | EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N' |
EN 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
BS EN 60730-2-3:2007 | Automatic electrical controls for household and similar use Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps |
I.S. EN 60598-1:2015 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
BS EN 62442-2:2014 | Energy performance of lamp controlgear Controlgear for high intensity discharge lamps (excluding fluorescent lamps). Method of measurement to determine the efficiency of the controlgear |
EN 62442-2:2014/A11:2017 | ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 2: CONTROLGEAR FOR HIGH INTENSITY DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - METHOD OF MEASUREMENT TO DETERMINE THE EFFICIENCY OF THE CONTROLGEAR |
BS EN 60598-1:2015 | Luminaires General requirements and tests |
BS EN 60079-15:2010 | Explosive atmospheres Equipment protection by type of protection \'n\' |
UNI EN 12665 : 2011 | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
UNE-EN 61347-1:2016 | Lamp controlgear - Part 1: General and safety requirements |
BS EN 61048 : 2006 | AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS |
CEI EN 61347-1 : 2016 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
CEI EN 60730-2-3 : 2008 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR THERMAL PROTECTORS FOR BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
UNE-EN 60598-1:2015 | Luminaires - Part 1: General requirements and tests |
UNE-EN 12665:2012 | Light and lighting - Basic terms and criteria for specifying lighting requirements |
BS EN 12665:2011 | Light and lighting. Basic terms and criteria for specifying lighting requirements |
EN 60923:2005/A1:2006 | AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS |
UNE-EN 60079-15:2013 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
I.S. EN 60927:2008 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS |
I.S. EN 62442-2:2014 | ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 2: CONTROLGEAR FOR HIGH INTENSITY DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - METHOD OF MEASUREMENT TO DETERMINE THE EFFICIENCY OF THE CONTROLGEAR |
EN 60598-1:2015/A1:2018 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
I.S. EN 60730-2-3:2007 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-3: PARTICULAR REQUIREMENTS FOR THERMAL PROTECTORS FOR BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
EN 61048:2006/A1:2016 | AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS (IEC 61048:2006/A1:2015) |
EN 60730-2-3:2007 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-3: PARTICULAR REQUIREMENTS FOR THERMAL PROTECTORS FOR BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
EN 60188:2001 | High-pressure mercury vapour lamps - Performance specifications |
EN 60192:2001 | Low pressure sodium vapour lamps - Performance specifications |
IEC 60662:2011 | High-pressure sodium vapour lamps - Performance specifications |
IEC 60192:2001 | Low-pressure sodium vapour lamps - Performance specifications |
IEC 60188:2001 | High-pressure mercury vapour lamps - Performance specifications |
IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
EN 61347-2-1:2001/A2:2014 | LAMP CONTROLGEAR - PART 2-1: PARTICULAR REQUIREMENTS FOR STARTING DEVICES (OTHER THAN GLOW STARTERS) (IEC 61347-2-1:2000/A2:2013) |
IEC 61347-2-1:2000+AMD1:2005+AMD2:2013 CSV | Lamp controlgear - Part 2-1: Particular requirements for startingdevices (other than glow starters) |
IEC 61167:2015 | Metal halide lamps - Performance specification |
IEC 62035:2014+AMD1:2016 CSV | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
EN 62035:2014 | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
EN 60662:2012 | High-pressure sodium vapour lamps - Performance specifications |
IEC 60923:2005+AMD1:2006 CSV | Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements |
IEC 61347-2-8:2000+AMD1:2006 CSV | Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.