EN 62532:2011/A1:2017
Current
The latest, up-to-date edition.
FLUORESCENT INDUCTION LAMPS - SAFETY SPECIFICATIONS
28-04-2017
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements
5 Assessment
Annex A (informative) - Schematic drawings of induction
lamps
Annex B (informative) - Information for luminaire design
Annex C (normative) - Schematic drawings for insulation
resistance test
Annex D (informative) - Information for ballast design
Annex E (normative) - Information for thermal test
Annex F (normative) - Values and method of measurement
of the maximum temperature rise of the measurement
points
Annex G (informative) - Information for luminaire design
Bibliography
Annex ZA (normative) - Normative references to international
Publications with their corresponding European
publications
Describes the safety requirements for fluorescent induction lamps for general lighting purposes.
| Committee |
TC 34
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 62532:2011 | Identical |
| I.S. EN 62532:2011 | Identical |
| VDE 0715-14 : 2017 | Identical |
| IEC 62532:2011+AMD1:2016 CSV | Identical |
| DIN EN 62532 : 2017 | Identical |
| PN EN 62532 : 2011 AMD 1 2017 | Identical |
| NEN EN IEC 62532 : 2011 AMD 1 2017 | Identical |
| SN EN 62532 : 2011 AMD 1 2017 | Identical |
| CEI EN 62532 : 2012 | Identical |
| NBN EN 62532 : 2011 | Identical |
| NF EN 62532 : 2011 AMD 1 2017 | Identical |
| BS EN 62532 : 2011 | Identical |
| BS EN 62532:2011+A1:2017 | Identical |
| CEI EN 62639 : 2012 | FLUORESCENT INDUCTION LAMPS - PERFORMANCE REQUIREMENTS |
| EN IEC 61347-2-14:2018 | Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps |
| EN 62639:2012 | Fluorescent induction lamps - Performance specification |
| 16/30342256 DC : 0 | BS EN 50107-3 - PRODUCT STANDARD COVERING LUMINOUS SIGNS WITH DISCHARGE LAMPS AND/OR LED (LIGHT EMITTING DIODES) AND/OR EL (ELECTROLUMINESCENT) LIGHTSOURCES WITH A NOMINAL VOLTAGE NOT EXCEEDING 1000 V, WITH THE EXCLUSION OF GENERAL LIGHTING, TRAFFIC- OR EMERGENCY RELATED PURPOSE |
| CEI 34-119 : 2010 | GUIDE FOR LUMINAIRE DESIGN - INFORMATION FOR A SAFE AND CORRECT OPERATION OF THE LIGHT SOURCES |
| PREN 50107-3 : DRAFT 2016 | PRODUCT STANDARD COVERING LUMINOUS SIGNS WITH DISCHARGE LAMPS AND/OR LED (LIGHT EMITTING DIODES) AND/OR EL (ELECTROLUMINESCENT) LIGHTSOURCES WITH A NOMINAL VOLTAGE NOT EXCEEDING 1000 V, WITH THE EXCLUSION OF GENERAL LIGHTING, TRAFFIC- OR EMERGENCY RELATED PURPOSE |
| I.S. EN 62639:2012 | FLUORESCENT INDUCTION LAMPS - PERFORMANCE SPECIFICATION (IEC 62639:2012 (EQV)) |
| BS EN 62639:2012 | Fluorescent induction lamps. Performance specification |
| I.S. EN IEC 61347-2-14:2018 | LAMP CONTROLGEAR - PART 2-14: PARTICULAR REQUIREMENTS FOR DC AND/OR AC SUPPLIED ELECTRONIC CONTROLGEAR FOR FLUORESCENT INDUCTION LAMPS |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| IEC TR 62471-2:2009 | Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety |
| IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| IEC 61199:2011+AMD1:2012+AMD2:2014 CSV | Single-capped fluorescent lamps - Safety specifications |
| IEC 60901:1996+AMD1:1997+AMD2:2000 CSV | Single-capped fluorescent lamps - Performance specifications |
| EN 60360:1998 | Standard method of measurement of lamp cap temperature rise |
| EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
| IEC 62471:2006 | Photobiological safety of lamps and lamp systems |
| EN 60901:1996/A6:2017 | SINGLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60901:1996/A6:2014, MODIFIED) |
| IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60360:1998 | Standard method of measurement of lamp cap temperature rise |
| EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.