![header thumbnail](/images/img-default-logo.png)
EN 636:2012+A1:2015
Current
The latest, up-to-date edition.
![header thumbnail](/images/img-default-logo.png)
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and subscripts
5 Classification system
6 General requirements
7 Requirements for plywood for use in dry conditions
8 Requirements for plywood for use in humid conditions
9 Requirements for plywood for use in exterior conditions
10 Supplementary properties
11 Verification of compliance
12 Marking, identification and documentation
Annex A (normative) - Supplementary properties
Annex B (informative) - Durability of wood and wood-based
products - Definition of Use classes of biological
attack- Application to plywood
Bibliography
This European Standard specifies the requirements for plywood, as defined in EN 313 2, for both general purpose use (non-structural application) and structural application in dry, humid or exterior conditions. It also gives a classification system based on the bending properties.NOTE 1This European Standard is referenced in EN 13986 for construction applications.This standard can be appropriately applied for all plywood, including overlaid and coated plywood, but it does not cover materials or processes used for overlaying or coating. Neither does it cover any materials or processes applied in relation to enhancement of biological durability.NOTE 2For additional guidance on biological durability and the potential need for preservative treatment, according to application and serviceability, reference can be made to CEN/TS 1099.The values listed under Clause 4 relate only to product properties; they are not 'characteristic values' and are not to be used in design calculations.NOTE 3Characteristic values (i.e. for use in design calculation according to EN 1995–1–1) are given either in EN 12369–2 which is based on the classification system given in this standard or by the manufacturer based on testing according to EN 789, EN 1058 and ENV 1156.Additional information on supplementary properties for certain applications is also given.
Committee |
CEN/TC 112
|
DevelopmentNote |
Supersedes EN 636-1, EN 636-2 and EN 636-3. (09/2003) Supersedes PREN 636. (10/2012) 2012 Edition Re-Issued in March 2015 & incorporates AMD 1 2015. (03/2015)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNI EN 636:2015 | Identical |
UNE-EN 636:2012 | Identical |
NBN EN 636 : 2012 + A1 2015 | Identical |
NF EN 636 : 2012 + A1 2015 | Identical |
NEN EN 636 : 2012 + A1 2015 | Identical |
NS EN 636 : 2012 + A1 2015 | Identical |
I.S. EN 636:2012 | Identical |
PN EN 636 : 2013 + A1 2015 | Identical |
SN EN 636 : 2012 + A1 2015 | Identical |
UNI EN 636 : 2013 | Identical |
BS EN 636:2012+A1:2015 | Identical |
UNE-EN 636:2012+A1:2015 | Identical |
BS EN 636 : 2012 | Identical |
DIN EN 636:2015-05 | Identical |
PREN 927-10 : DRAFT 2017 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 10: RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
DIN EN 16430-2 E : 2015 | FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 2: TEST METHOD AND RATING FOR THERMAL OUTPUT |
DD CEN/TS 635-4:2007 | Plywood. Classification by surface appearance Parameters of ability for finishing, guideline |
BS EN 15684:2012 | Building hardware. Mechatronic cylinders. Requirements and test methods |
S.R. CEN/TS 16499:2013 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
PD CEN/TR 12872:2014 | Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs |
07/30170532 DC : DRAFT NOV 2007 | BS EN 1906 - BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
BS EN 14974 : 2006 | FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
PREN 12871 : DRAFT 2011 | WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
I.S. CEN/TS 14966:2005 | WOOD-BASED PANELS - SMALL SCALE INDICATIVE TEST METHODS FOR CERTAIN MECHANICAL PROPERTIES |
PREN 14974 : DRAFT 2016 | SKATEPARKS - SAFETY REQUIREMENTS AND TEST METHODS |
NF EN 14974 : 2006 + A1 2010 | FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
16/30345765 DC : 0 | BS EN 14974 - SKATEPARKS - SAFETY REQUIREMENTS AND TEST METHODS |
EN 1995-1-1:2004/A2:2014 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
EN 15567-1:2015 | Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements |
DIN EN 1906:2012-12 | BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
DIN EN 14964 E : 2007 | RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
DIN EN 15312 E : 2010 | FREE ACCESS MULTI-SPORTS EQUIPMENT - REQUIREMENTS, INCLUDING SAFETY AND TEST METHODS |
BS EN 1995-1-1 : 2012 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
UNE-EN 13238:2011 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
BS EN 326-2 : 2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
UNE-EN 15684:2015 | Building hardware - Mechatronic cylinders - Requirements and test methods |
BS EN 14964:2006 | Rigid underlays for discontinuous roofing. Definitions and characteristics |
BS EN 15312 : 2007 | FREE ACCESS MULTI-SPORTS EQUIPMENT - REQUIREMENTS, INCLUDING SAFETY AND TEST METHODS |
CEN/TS 16499:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Resistance to blocking of paints and varnishes on wood |
EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
EN 12369-2:2011 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
CEN/TS 12872:2007 | Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs |
CEN/TS 16526:2013 | Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristics |
CEN/TS 14966:2005 | Wood-based panels - Small scale indicative test methods for certain mechanical properties |
EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
EN 1303:2015 | Building hardware - Cylinders for locks - Requirements and test methods |
13/30279677 DC : 0 | BS EN 15567-1 - SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
13/30282505 DC : 0 | BS EN 16630 - PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN 16430-2:2014 | FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 2: TEST METHOD AND RATING FOR THERMAL OUTPUT |
PD CEN/TS 16526:2013 | Sandwich boards for furniture (SWB-F). Factory made products. Definition, classification and test methods for determination of performance characteristics |
17/30364312 DC : 0 | BS EN 927-10 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 10: RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
DD CEN/TS 12872:2007 | Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs |
PREN 1176-1 : DRAFT 2014 | PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
DD CEN/TS 14966:2005 | Wood-based panels. Small scale indicative test methods for certain mechanical properties |
09/30200831 DC : 0 | BS EN 15312:2007/A1 - FREE ACCESS MULTI-SPORTS EQUIPMENT - REQUIREMENTS, INCLUDING SAFETY, AND TEST METHODS |
PREN 14374 : DRAFT 2016 | TIMBER STRUCTURES - LAMINATED VENEER LUMBER (LVL) - REQUIREMENTS |
S.R. CEN/TR 12872:2014 | WOOD-BASED PANELS - GUIDANCE ON THE USE OF LOAD-BEARING BOARDS IN FLOORS, WALLS AND ROOFS |
PREN 16867 : DRAFT 2015 | BUILDING HARDWARE - MECHATRONIC DOOR FURNITURE - REQUIREMENTS AND TEST METHODS |
PREN 1906 : DRAFT 2009 | BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
UNE-EN 14974:2006 | Facilities for users of roller sports equipment - Safety requirements and test methods |
UNI CEN/TS 16499 : 2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
DIN EN 1303:2015-08 | Building hardware - Cylinders for locks - Requirements and test methods |
DIN EN 12871:2013-09 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
DIN EN 14964:2007-01 | RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
DIN EN 13986:2015-06 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
DIN EN 326-2:2014-10 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014 |
DIN EN 1995-1-1:2010-12 | Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (includes Corrigendum AC:2006 + Amendment A1:2008) |
BS EN 12871:2013 | Wood-based panels. Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
BS EN 15567-1:2015 | Sports and recreational facilities. Ropes courses Construction and safety requirements |
I.S. EN 13238:2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES |
EN 15684:2012 | Building hardware - Mechatronic cylinders - Requirements and test methods |
UNI EN 15684 : 2012 | BUILDING HARDWARE - MECHATRONIC CYLINDERS - REQUIREMENTS AND TEST METHODS |
I.S. EN 13986:2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
I.S. EN 12871:2013 | WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
DIN EN 13238:2010-06 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
I.S. EN 1303:2015 | BUILDING HARDWARE - CYLINDERS FOR LOCKS - REQUIREMENTS AND TEST METHODS |
I.S. EN 12369-2:2011 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
I.S. EN 1906:2012 | BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
I.S. EN 326-2:2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
UNI EN 12369-2 : 2011 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
DIN EN 16630:2015-06 | PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 16430-2:2015-03 | FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 2: TEST METHOD AND RATING FOR THERMAL OUTPUT |
DIN EN 14974 E : 2010 | FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
11/30237554 DC : 0 | BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS |
PREN 12369-2 : DRAFT 2009 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
15/30325358 DC : 0 | BS EN 16899 - SPORTS AND RECREATIONAL EQUIPMENT - PARKOUR EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
14/30299480 DC : 0 | BS EN 1176-1 - PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
BS EN 16630:2015 | Permanently installed outdoor fitness equipment. Safety requirements and test methods |
09/30200047 DC : 0 | BS EN 12369-2 - WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
S.R. CEN TS 635-4:2007 | PLYWOOD - CLASSIFICATION BY SURFACE APPEARANCE - PART 4: PARAMETERS OF ABILITY FOR FINISHING, GUIDELINE |
DIN EN 15684:2013-01 | Building hardware - Mechatronic cylinders - Requirements and test methods |
BS EN 16899:2016 | Sports and recreational equipment. Parkour equipment. Safety requirements and test methods |
I.S. EN 1176-1:2017 | PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
S.R. CWA 17094-1:2016 | POLICE FIREARMS TECHNOLOGY - PART 1: POLICE PISTOL AND RIFLE AMMUNITION FEATURES - RECOMMENDATIONS |
09/30211230 DC : 0 | BS EN 14272 - PLYWOOD - CALCULATION METHOD FOR SOME MECHANICAL PROPERTIES |
BS EN 16430-2:2014 | Fan assisted radiators, convectors and trench convectors Test method and rating for thermal output |
S.R. CEN TS 12872:2007 | WOOD-BASED PANELS - GUIDANCE ON THE USE OF LOAD-BEARING BOARDS IN FLOORS, WALLS AND ROOFS |
S.R. CEN/TS 16526:2013 | SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS |
PREN 15567-1 : DRAFT 2013 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
EN 1176-1:2017 | Playground equipment and surfacing - Part 1: General safety requirements and test methods |
BS EN 335-3:1996 | Hazard classes of wood and wood-based products against biological attack Application to wood-based panels |
EN 14964:2006 | Rigid underlays for discontinuous roofing - Definitions and characteristics |
EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
EN 13986:2004+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
UNI EN 1906 : 2012 | BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
UNI EN 326-2 : 2014 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
UNI CEN/TS 16526 : 2014 | SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS |
UNI EN 15312 : 2010 | FREE ACCESS MULTI-SPORTS EQUIPMENT - REQUIREMENTS, INCLUDING SAFETY AND TEST METHODS |
UNI EN 12871 : 2013 | WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
UNI EN 13238 : 2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES |
UNI EN 1995-1-1 : 2014 | EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
EN 14974:2006+A1:2010 | Facilities for users of roller sports equipment - Safety requirements and test methods |
I.S. EN 16899:2016 | SPORTS AND RECREATIONAL EQUIPMENT - PARKOUR EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN 1995-1-1:2005 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
DIN EN 15684 E : 2013 | BUILDING HARDWARE - MECHATRONIC CYLINDERS - REQUIREMENTS AND TEST METHODS |
DIN EN 16630 E : 2015 | PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
09/30203647 DC : 0 | BS EN 1906 - BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
UNE-EN 16430-2:2015 | Fan assisted radiators, convectors and trench convectors - Part 2: Test method and rating for thermal output |
I.S. EN 15312:2007 | FREE ACCESS MULTI-SPORTS EQUIPMENT - REQUIREMENTS, INCLUDING SAFETY AND TEST METHODS |
EN 16899:2016 | Sports and recreational equipment - Parkour equipment - Safety requirements and test methods |
15/30298562 DC : 0 | BS EN 16867 - BUILDING HARDWARE - MECHATRONIC DOOR FURNITURE - REQUIREMENTS AND TEST METHODS |
UNE-EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
UNE-EN 1995-1-1:2016 | Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings. |
BS EN 1303:2015 | Building hardware. Cylinders for locks. Requirements and test methods |
BS EN 12369-2:2011 | Wood-based panels. Characteristic values for structural design Plywood |
DIN EN 15312:2010-12 | Free access multi-sports equipment - Requirements, including safety and test methods (includes Amendment A1:2010) |
UNE-EN 13986:2006 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
I.S. EN 15567-1:2015 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
UNE-EN 12369-2:2011 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
EN 15312:2007+A1:2010 | Free access multi-sports equipment - Requirements, including safety and test methods |
EN 16630:2015 | Permanently installed outdoor fitness equipment - Safety requirements and test methods |
EN 16430-2 : 2014 | FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 2: TEST METHOD AND RATING FOR THERMAL OUTPUT |
EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
EN 1906:2012 | Building hardware - Lever handles and knob furniture - Requirements and test methods |
12/30266868 DC : 0 | BS EN 16481 - TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHOD |
PD CEN/TS 16499:2013 | Paints and varnishes. Coating materials and coating systems for exterior wood. Resistance to blocking of paints and varnishes on wood |
11/30253904 DC : 0 | BS EN 12871 - WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
04/30048871 DC : DRAFT MAY 2004 | BS EN 14964 - ROOF COVERING PRODUCTS FOR DISCONTINUOUS LAYING AND PRODUCTS FOR WALL CLADDING - RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
12/30255714 DC : 0 | BS EN 16430-2 - FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 2: TEST METHOD AND RATING FOR THERMAL OUTPUT |
08/30171383 DC : DRAFT JUNE 2008 | BS EN 12871 - WOOD-BASED PANELS - PERFORMANCE SPECIFICATIONS AND REQUIREMENTS FOR LOAD BEARING BOARDS FOR USE IN FLOORS, WALLS AND ROOFS |
UNE-EN 16630:2015 | Permanently installed outdoor fitness equipment - Safety requirements and test methods |
I.S. EN 15684:2012 | BUILDING HARDWARE - MECHATRONIC CYLINDERS - REQUIREMENTS AND TEST METHODS |
I.S. EN 16630:2015 | PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
UNE-EN 16899:2017 | Sports and recreational equipment - Parkour equipment - Safety requirements and test methods |
UNI EN 14974 : 2010 | FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN 14974:2006 | FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 326-2 E : 2000 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
DIN EN 1995-1-1 E : 2010 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
DIN EN 12369-2:2011-09 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
UNE-EN 1303:2016 | Building hardware - Cylinders for locks - Requirements and test methods |
BS EN 1906:2012 | Building hardware. Lever handles and knob furniture. Requirements and test methods |
BS EN 13986 : 2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
BS EN 13238:2010 | Reaction to fire tests for building products. Conditioning procedures and general rules for selection of substrates |
DIN EN 14974:2010-12 | FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 15567-1:2015-08 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
DIN EN 326-2:2000-10 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
CEN/TS 635-4:2007 | Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline |
CEN/TR 12872:2014 | Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs |
UNE-EN 13986:2006+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
UNE-EN 15312:2007 | Free access multi-sports equipment - Requirements, including safety, and test methods |
EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
EN 717-2:1994/AC:2002 | WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD |
EN 635-2:1995 | Plywood - Classification by surface appearance - Part 2: Hardwood |
CEN/TS 1099:2007 | Plywood - Biological durability - Guidance for the assessment of plywood for use in different use classes |
EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
CEN/TS 13810-2:2003 | Wood-based panels - Floating floors - Part 2: Test methods |
EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
EN 322:1993 | Wood-based panels - Determination of moisture content |
EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
EN 14272:2011 | Plywood - Calculation method for some mechanical properties |
EN 596:1995 | Timber structures - Test methods - Soft body impact test of timber framed walls |
EN 324-1:1993 | Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
EN 1195:1997 | Timber structures - Test methods - Performance of structural floor decking |
EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
EN 13446:2002 | Wood-based panels - Determination of withdrawal capacity of fasteners |
EN 13810-1:2002 | Wood-based panels - Floating floors - Part 1: Performance specifications and requirements |
EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
EN 635-1:1994 | Plywood - Classification by surface appearance - Part 1: General |
EN 594:2011 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
EN 324-2:1993 | Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness |
EN 323:1993 | Wood-based panels - Determination of density |
EN 315:2000 | Plywood - Tolerances for dimensions |
EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
EN 313-1:1996 | Plywood - Classification and terminology - Part 1: Classification |
EN 313-2:1999 | Plywood - Classification and terminology - Part 2: Terminology |
EN 314-2:1993 | Plywood - Bonding quality - Part 2: Requirements |
EN 1995-1-1:2004/A2:2014 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
EN 635-3:1995 | Plywood - Classification by surface appearance - Part 3: Softwood |
CEN/TS 635-4:2007 | Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline |
EN 12369-2:2011 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
EN 635-5:1999 | Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects |
EN 314-1:2004 | Plywood - Bonding quality - Part 1: Test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.