EN 690:2013
Current
The latest, up-to-date edition.
Agricultural machinery - Manure spreaders - Safety
30-10-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective
measures
6 Verification of safety requirements or
protective measures
7 Information for use
Annex A (informative) - Illustrations of manure
spreaders
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2006/42/EC
on machinery
Bibliography
This European Standard, to be used together with EN ISO 4254-1, specifies the safety requirements and their verification for the design and construction of self-propelled, mounted, semi-mounted and trailed manure spreaders, provided with vertical or horizontal axes rotors rear spreader device or with vertical axes disc rear spreader device. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.When requirements of this document are different from those which are stated in EN ISO 4254-1, the requirements of this document take precedence over the requirements of EN ISO 4254-1 for machines that have been designed and built according the provisions of this document.This European Standard, taken together with EN ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to manure spreaders, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Table 1), excepting the hazards arising from:-vibrations of self-propelled machinery;-travelling function of self-propelled machinery;-overturning in regard to the protection of the operator at the driving station of a self-propelled machine;-hazards related to conveying devices other than those defined in 3.3.1 and 3.3.2, for example load push/push-off device.NOTE 1Regarding roll-over protection for self-propelled agricultural machinery, see EN ISO 16231-1.NOTE 2This European Standard is neither applicable to environmental hazards nor to road safety. Environmental aspects are dealt with in EN 13080.This European Standard does not apply to manure spreaders with laterally mounted spreading device as defined in 3.6. This European Standard is not applicable to manure spreaders which are manufactured before the date of publication of this document by CEN.
Committee |
CEN/TC 144
|
DevelopmentNote |
Supersedes PREN 690. (11/2013)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNE-EN 690:1995 | Identical |
NS EN 690 : 2013 | Identical |
SS-EN 690:2013 | Identical |
NBN EN 690 : 2014 | Identical |
SN EN 690 : 2014 | Identical |
UNI EN 690 : 2014 | Identical |
PN EN 690 : 2014 | Identical |
NF EN 690 : 2013 | Identical |
DIN EN 690:2014-03 | Identical |
NEN EN 690 : 2013 | Identical |
BS EN 690:2013 | Identical |
I.S. EN 690:2013 | Identical |
UNE-EN 690:2014 | Identical |
UNE-EN 1853:2018 | Agricultural machinery - Trailers - Safety |
DIN EN 13080:2003-02 | AGRICULTURAL MACHINERY - MANURE SPREADERS - ENVIRONMENTAL PROTECTION - REQUIREMENTS AND TEST METHODS |
EN 1853:2017 | Agricultural machinery - Trailers - Safety |
15/30329401 DC : 0 | BS EN 1853 - AGRICULTURAL MACHINERY - TRAILERS WITH TIPPING BODY - SAFETY |
I.S. EN 1853:2017 | AGRICULTURAL MACHINERY - TRAILERS - SAFETY |
BS EN 13080:2002 | Agricultural machinery. Manure spreaders. Environmental protection. Requirements and test methods |
EN 13080:2002 | Agricultural machinery - Manure spreaders - Environmental protection - Requirements and test methods |
ISO/TS 28923:2012 | Agricultural machinery — Guards for moving parts of power transmission — Guard opening with tool |
ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
ISO 5353:1995 | Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point |
ISO 3600:2015 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator's manuals — Content and format |
EN ISO 14982:2009 | Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
EN ISO 5353:1998 | Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995) |
ISO 14982:1998 | Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteria |
EN 13080:2002 | Agricultural machinery - Manure spreaders - Environmental protection - Requirements and test methods |
EN 15811:2014 | Agricultural machinery - Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923:2012 modified) |
ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
EN ISO 16231-1:2013 | Self-propelled agricultural machinery - Assessment of stability - Part 1: Principles (ISO 16231-1:2013) |
ISO 4254-1:2013 | Agricultural machinery — Safety — Part 1: General requirements |
EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
EN ISO 4254-1:2015 | Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
ISO 16231-1:2013 | Self-propelled agricultural machinery — Assessment of stability — Part 1: Principles |
ISO 11684:1995 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.