EN 932-1:1996
Current
Current
The latest, up-to-date edition.
Tests for general properties of aggregates - Part 1: Methods for sampling
Published date
21-08-1996
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Definitions
4 Principles of sampling
5 Bulk sample and sampling increment quantity and number
6 Sampling plan
7 Apparatus
8 Sampling procedures
9 Sample reduction
10 Marking, packaging and dispatch of the samples
11 Sampling report
Annex A (informative) Examples of equipment for sampling and
sample reduction
Annex B (informative) Measurement of sampling variation
Annex C (informative) Examples of methods for sampling from
conical stockpiles
Annex D (informative) The use of random numbers for random
selection
Annex E (informative) Bibliography
This European Standard specifies methods for obtaining samples of aggregates from deliveries preparation and processing plants including stocks. The aim of sampling is to obtain a bulk sample that is representative of the average properties of the batch. The methods specified in this standard are also suitable for obtaining sampling increments which may be tested separately. Methods to be used for sample reduction are also given.
| Committee |
CEN/TC 154
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNI EN 932-1 : 1998 | Identical |
| NEN EN 932-1 : 1996 | Identical |
| PN EN 932-1 : 1999 | Identical |
| NBN EN 932-1 : 1996 | Identical |
| UNE-EN 932-1:1997 | Identical |
| NS EN 932-1 : 1ED 1996 | Identical |
| NF EN 932-1 : 1996 | Identical |
| BS EN 932-1:1997 | Identical |
| I.S. EN 932-1:1997 | Identical |
| DIN EN 932-1:1996-11 | Identical |
| SN EN 932-1 : 1996 | Identical |
| DIN EN 1367-8 E : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
| BS EN 1097-11:2013 | Tests for mechanical and physical properties of aggregates Determination of compressibility and confined compressive strength of lightweight aggregates |
| I.S. EN 13055-2:2004 | LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| BS EN 1367-7:2014 | Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing of Lightweight aggregates |
| 07/30166977 DC : DRAFT AUG 2007 | BS EN 1744-1 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| BS EN 15599-1:2010 | Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from expanded perlite (EP) products Specification for bonded and loose-fill products before installation |
| 09/30207822 DC : 0 | BS EN 15600-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| PREN 13279-2 : DRAFT 2013 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 2: TEST METHODS |
| PD CEN/TR 15310-4:2006 | Characterization of waste. Sampling of waste materials Guidance on procedures for sample packaging, storage, preservation, transport and delivery |
| BS EN 933-11:2009 | Tests for geometrical properties of aggregates Classification test for the constituents of coarse recycled aggregate |
| 10/30218648 DC : DRAFT JUNE 2010 | BS EN 1744-7 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA AGGREGATE) |
| 17/30345777 DC : 0 | BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS |
| DIN EN 15600-1:2010-12 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
| 07/30165786 DC : DRAFT AUG 2007 | BS EN 1367-4 - TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE |
| DIN EN 15732:2013-01 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| DIN EN 1744-7:2012-05 | Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
| BS EN 19694-5:2016 | Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries Lime industry |
| BS EN 15732:2012 | Light weight fill and thermal insulation products for civil engineering applications (CEA). Expanded clay lightweight aggregate products (LWA) |
| I.S. EN 16236:2013 | EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| 06/30153220 DC : 0 | BS EN 1367-6 - TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6 - RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT |
| BS EN 1744-7:2012 | Tests for chemical properties of aggregates Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
| PREN 13450 : DRAFT 2015 | AGGREGATES FOR RAILWAY BALLAST |
| UNE-EN 1367-8:2015 | Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates |
| I.S. EN 1744-7:2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH AGGREGATE (MIBA AGGREGATE) |
| I.S. EN 1367-6:2008 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL) |
| I.S. EN 13055:2016 | LIGHTWEIGHT AGGREGATES |
| I.S. EN 1744-8:2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES |
| UNI EN 1744-7 : 2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH - AGGREGATE (MIBA AGGREGATE) |
| PREN 13383-2 : DRAFT 2017 | ARMOURSTONE - PART 2: TEST METHODS |
| DIN EN 16236:2015-07 (Draft) | EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| UNI EN 15732 : 2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| I.S. CEN TR 15310-3:2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 3: GUIDANCE ON PROCEDURES FOR SUB-SAMPLING IN THE FIELD |
| DIN EN 1367-2:2010-02 | Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test |
| BS EN 1744-6:2006 | Tests for chemical properties of aggregates Determination of the influence of recycled aggregate extract on the initial setting time of cement |
| BS EN 13450:2013 | Aggregates for railway ballast |
| BS EN 13279-2:2014 | Gypsum binders and gypsum plasters Test methods |
| BS EN 1367-3:2001 | Tests for thermal and weathering properties of aggregates Boiling test for Sonnenbrand basalt |
| ISO 11272:2017 | Soil quality — Determination of dry bulk density |
| I.S. EN 459-2:2010 | BUILDING LIME - PART 2: TEST METHODS |
| I.S. EN 13279-2:2014 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 2: TEST METHODS |
| EN 13286-44:2003 | Unbound and hydraulically bound mixtures - Part 44: Test method for the determination of the alpha coefficient of vitrified blast furnace slag |
| EN 1097-11:2013 | Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates |
| DIN EN 14316-1:2004-11 | Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 14316-1:2004 |
| I.S. EN 1367-2:2009 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULFATE TEST |
| I.S. EN 13286-1:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING |
| EN 13108-8:2016 | Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt |
| EN 13279-2:2014 | Gypsum binders and gypsum plasters - Part 2: Test methods |
| CEN/TR 15310-4:2006 | Characterization of waste - Sampling of waste materials - Part 4: Guidance on procedures for sample packaging, storage, preservation, transport and delivery |
| DIN EN 14317-1:2004-11 | Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 14317-1:2004 |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| CEN/TR 15310-3:2006 | Characterization of waste - Sampling of waste materials - Part 3: Guidance on procedures for sub-sampling in the field |
| CEN/TS 16811-3:2015 | Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods |
| EN 13383-2:2013 | Armourstone - Part 2: Test methods |
| EN 13055-2:2004 | Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
| EN 12274-7:2005 | Slurry surfacing - Test methods - Part 7: Shaking abrasion test |
| UNI EN 12697-42 : 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 42: AMOUNT OF FOREIGN MATTER IN RECLAIMED ASPHALT |
| UNI EN 16236 : 2013 | EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| 08/30183119 DC : DRAFT AUG 2008 | BS EN 459-2 - BUILDING LIME - PART 2: TEST METHODS |
| 13/30278741 DC : 0 | BS EN 13279-2 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 2: TEST METHODS |
| PREN 16236 : DRAFT 2015 | EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| UNI EN 933-11 : 2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE |
| DIN EN 1367-7:2014-07 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
| 15/30311097 DC : 0 | BS EN 13450 - AGGREGATES FOR RAILWAY BALLAST |
| 04/30088151 DC : DRAFT FEB 2004 | EN 1744-6 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT |
| 12/30256420 DC : 0 | BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| 00/105661 DC : DRAFT AUG 2000 | BS EN 1744-4 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES |
| S.R. CEN TS 12390-10:2007 | TESTING HARDENED CONCRETE - PART 10: DETERMINATION OF THE RELATIVE CARBONATION RESISTANCE OF CONCRETE |
| 12/30256925 DC : 0 | BS EN 13055 - LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| BS EN 16811-1:2016 | Winter service equipment and products. De-icing agents Sodium chloride. Requirements and test methods |
| PD CEN/TR 15310-3:2006 | Characterization of waste. Sampling of waste materials Guidance on procedures for sub-sampling in the field |
| 09/30195711 DC : 0 | BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS |
| PREN 15600-1 : DRAFT 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| 16/30320762 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| PREN 13108-8 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
| PREN 15732 : DRAFT 2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| DIN 4226-2:2002-02 | AGGREGATES FOR CONCRETE AND MORTAR - PART 2: LIGHTWEIGHT AGGREGATES |
| UNI EN 1367-7 : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
| I.S. EN 1097-11:2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES |
| I.S. EN 15600-1:2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| DIN EN 1367-1:2007-06 | Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing |
| DIN EN 12697-42:2013-03 | Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt |
| DIN EN 13279-2:2014-03 | Gypsum binders and gypsum plasters - Part 2: Test methods; German version EN 13279-2:2014 |
| DIN EN 1367-4:2008-06 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE |
| DIN EN 1367-5:2011-04 | Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
| UNE-EN 13279-2:2014 | Gypsum binders and gypsum plasters - Part 2: Test methods |
| BS EN 13055-2:2004 | Lightweight aggregates Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
| BS EN 13286-1:2003 | Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Introduction, general requirements and sampling |
| BS EN 14317-1:2004 | Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for bonded and loose-fill products before installation |
| BS EN 14316-1:2004 | Thermal insulation products for buildings. In-situ thermal insulation formed from expanded perlite (EP) products Specification for bonded and loose-fill products before installation |
| EN 12697-42:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt |
| I.S. EN 1367-1:2007 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING |
| I.S. EN 13450:2013 | AGGREGATES FOR RAILWAY BALLAST |
| DIN EN 1402-2:2004-01 | UNSHAPED REFRACTORY PRODUCTS - PART 2: SAMPLING FOR TESTING |
| DIN EN 13286-44:2003-09 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 44: TEST METHOD FOR THE DETERMINATION OF THE ALPHA COEFFICIENT OF VITRIFIED BLAST FURNACE SLAG |
| I.S. EN 1097-6:2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION |
| I.S. EN 12697-42:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 42: AMOUNT OF FOREIGN MATTER IN RECLAIMED ASPHALT |
| I.S. EN 1367-4:2008 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE |
| DIN EN 12697-11:2012-07 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN |
| I.S. EN 1367-5:2011 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF RESISTANCE TO THERMAL SHOCK |
| I.S. EN 1744-1:2009 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| UNE-EN 1744-7:2012 | Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
| DIN EN 1367-8:2014-07 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
| BS EN 13055:2016 | Lightweight aggregates |
| DIN EN 1097-11:2013-11 | Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates |
| I.S. EN 1402-2:2003 | UNSHAPED REFRACTORY PRODUCTS - PART 2: SAMPLING FOR TESTING |
| DIN EN 1744-8:2012-11 | Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
| I.S. EN 13055-1:2002 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
| 07/30166974 DC : DRAFT AUG 2007 | BS EN 1367-2 - TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULPHATE TEST |
| DIN EN 15599-1:2010-12 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
| DIN EN ISO 11272:2016-06 (Draft) | SOIL QUALITY - DETERMINATION OF DRY BULK DENSITY (ISO 11272:2017) |
| 02/103564 DC : DRAFT AUG 2002 | PREN 13108-8 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
| BS EN ISO 11272:2017 | Soil quality. Determination of dry bulk density |
| 09/30207815 DC : 0 | BS EN 15599-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN 15599-1 : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN 1097-11 : 2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES |
| UNI EN 1367-8 : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
| 03/107772 DC : DRAFT MAY 2003 | EN 12697-42 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 42: AMOUNT OF FOREIGN MATTERS IN RECLAIMED ASPHALT |
| 13/30278714 DC : 0 | BS EN 13108-8 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
| 06/30153237 DC : DRAFT JULY 2006 | BS ISO 16003 - COMPONENTS FOR GASEOUS MEDIA AND FIRE EXTINGUISHING SYSTEMS - REQUIREMENTS AND TEST METHODS - CONTAINER VALVE ASSEMBLIES AND THEIR ACTUATORS, SELECTOR VALVES AND THEIR ACTUATORS, NOZZLES, FLEXIBLE CONNECTORS, AND CHECK VALVES AND NON-RETURN VALVES |
| DD CEN/TS 12390-10:2007 | Testing hardened concrete Determination of the relative carbonation resistance of concrete |
| 10/30218642 DC : DRAFT JUNE 2010 | BS EN 1097-6 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION |
| BS EN 1367-6:2008 | Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing in the presence of salt (NaCl) |
| I.S. EN 15732:2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| PREN 15599-1 : DRAFT 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| DIN EN 1744-4:2005-10 | Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures |
| DIN EN 1744-1:2013-03 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| DIN EN 1744-5:2006-12 | Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts |
| DIN EN 1744-6:2006-12 | Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement |
| DIN EN 12274-7:2005-08 | SLURRY SURFACING - PART 7: SHAKING ABRASION TEST |
| DIN EN 1097-6:2013-09 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| BS EN 459-2:2010 | Building lime Test methods |
| BS EN 13383-2:2013 | Armourstone Test methods |
| UNE-EN 459-2:2011 | Building lime - Part 2: Test methods |
| BS EN 1367-4:2008 | Tests for thermal and weathering properties of aggregates Determination of drying shrinkage |
| UNI EN 1744-1 : 2013 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| UNI EN 14063-1 : 2005 | THERMAL INSULATION MATERIALS AND PRODUCTS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN 1367-2 : 2010 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULFATE TEST |
| UNI EN 1367-1 : 2007 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING |
| UNI EN 13139 : 2013 | AGGREGATES FOR MORTAR |
| UNI EN 1367-4 : 2008 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE |
| UNI EN 12274-7 : 2005 | SLURRY SURFACING - TEST METHODS - PART 7: SHAKING ABRASION TEST |
| UNI EN 13279-2 : 2014 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 2: TEST METHODS |
| UNI EN 1744-6 : 2007 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF RECYCLED AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT |
| UNI EN 1367-5 : 2011 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF RESISTANCE TO THERMAL SHOCK |
| I.S. EN 932-3:1997 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 3: PROCEDURE AND TERMINOLOGY FOR SIMPLIFIED PETROGRAPHIC DESCRIPTION |
| UNI EN 13383-2 : 2013 | ARMOURSTONE - PART 2: TEST METHODS |
| UNI EN 13450 : 2013 | AGGREGATES FOR RAILWAY BALLAST |
| UNE-EN 1097-11:2013 | Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates |
| 14/30303607 DC : 0 | BS EN ISO 19694-5 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 5: LIME INDUSTRY |
| BS EN 1367-8:2014 | Tests for thermal and weathering properties of aggregates Determination of resistance to disintegration of Lightweight Aggregates |
| I.S. EN 933-11:2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE |
| 08/30195056 DC : DRAFT DEC 2008 | BS EN ISO 1927-2 - UNSHAPED REFRACTORY MATERIALS - PART 2: SAMPLING FOR TESTING |
| DIN EN 1367-7 E : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
| DD ENV 1402-2:1997 | Unshaped refractory products Sampling for testing |
| 07/30170936 DC : 0 | BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| 11/30231793 DC : 0 | BS EN 16262 - SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES |
| BS EN 1744-8:2012 | Tests for chemical properties of aggregates Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
| NF EN 15600-1 : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| DIN EN 933-11:2011-05 | Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate (includes Corrigendum AC:2009) |
| NF EN 15599-1 : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| CEN/TS 12390-10:2007 | Testing hardened concrete - Part 10: Determination of the relative carbonation resistance of concrete |
| 15/30311106 DC : 0 | BS EN 16236 - EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| EN 16236:2013 | Evaluation of conformity of aggregates - Initial Type Testing and Factory Production Control |
| 15/30326284 DC : 0 | BS EN 16907-2 - EARTHWORKS - PART 2: CLASSIFICATION OF MATERIALS |
| UNI EN 459-2 : 2010 | BUILDING LIME - PART 2: TEST METHODS |
| I.S. CEN TR 15310-4:2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 4: GUIDANCE ON PROCEDURES FOR SAMPLE PACKAGING, STORAGE, PRESERVATION, TRANSPORT AND DELIVERY |
| DIN EN 1097-2:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| DIN EN 459-2:2010-12 | Building lime - Part 2: Test methods |
| DIN EN 14063-1:2016-10 (Draft) | Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation; German and English version prEN 14063-1:2016 |
| BS EN 12697-11:2012 | Bituminous mixtures. Test methods for hot mix asphalt Determination of the affinity between aggregate and bitumen |
| BS EN 12274-7:2005 | Slurry surfacing. Test methods Shaking abrasion test |
| BS EN 12697-42:2012 | Bituminous mixtures. Test methods for hot mix asphalt Amount of foreign matter in reclaimed asphalt |
| BS EN 1744-1 : 2009 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| UNI EN 1097-2 : 2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| BS EN 13139:2013 | Aggregates for mortar |
| UNE-EN 1744-1:2010 | Tests for chemical properties of aggregates - Part 1: Chemical analysis |
| EN 12697-11:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen |
| I.S. EN 12697-11:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN |
| BS EN 1402-2:2003 | Unshaped refractory products Sampling for testing |
| BS EN 13055-1:2002 | Lightweight aggregates Lightweight aggregates for concrete, mortar and grout |
| BS EN 1367-2:2009 | Tests for thermal and weathering properties of aggregates Magnesium sulfate test |
| UNI EN 12697-11 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN |
| UNE-EN 12697-42:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt |
| BS EN 1367-1:2007 | Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing |
| UNE-EN 1097-6:2014 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| BS EN 12697-28:2001 | Bituminous mixtures. Test methods for hot mix asphalt Preparation of samples for determining binder content, water content and grading |
| BS EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates Determination of resistance to thermal shock |
| BS EN 13286-44:2003 | Unbound and hydraulically bound mixtures Test method for the determination of the alpha coefficient of vitrified blast furnace slag |
| BS EN 1744-4:2005 | Tests for chemical properties of aggregates Determination of water susceptibility of fillers for bituminous mixtures |
| BS EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
| BS EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates Determination of particle density and water absorption |
| BS EN 13108-8:2016 | Bituminous mixtures. Material specifications Reclaimed asphalt |
| EN 12697-28:2000 | Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading |
| EN 1367-6:2008 | Tests for thermal and weathering properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl) |
| EN 16811-1:2016 | Winter service equipment and products - De-icing agents - Part 1: Sodium chloride - Requirements and test methods |
| EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
| EN 14317-1:2004 | Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
| EN 1744-1:2009+A1:2012 | Tests for chemical properties of aggregates - Part 1: Chemical analysis |
| EN 14316-1:2004 | Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
| EN 1367-7:2014 | Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates |
| EN 1402-2:2003 | Unshaped refractory products - Part 2: Sampling for testing |
| UNI EN 1097-6 : 2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION |
| EN 19694-5:2016 | Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 5: Lime industry |
| EN 16811-2:2016 | Winter service equipment and products - De-icing agents - Part 2: Calcium chloride and Magnesium chloride - Requirements and test methods |
| EN 15600-1:2010 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
| EN 1367-8:2014 | Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates |
| ONORM EN 1744-4 : 2005 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES |
| EN 1367-4:2008 | Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage |
| EN 1744-6:2006 | Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement |
| ENV 1402-2 : 1997 | UNSHAPED REFRACTORY PRODUCTS - SAMPLING FOR TESTING |
| EN 15599-1:2010 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
| EN 1367-2:2009 | Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test |
| EN ISO 11272:2017 | Soil quality - Determination of dry bulk density (ISO 11272:2017) |
| EN 1744-7:2012 | Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
| EN 1744-5:2006 | Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts |
| EN 932-2:1999 | Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples |
| EN 15732:2012 | Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) |
| EN 1744-3:2002 | Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates |
| EN 1367-1:2007 | Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing |
| EN 1744-8:2012 | Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
| UNE-EN 15732:2014 | Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) |
| 06/30158376 DC : 0 | BS EN 15599-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| I.S. EN 13108-8:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
| PD CEN/TS 16811-3:2015 | Winter maintenance equipment. De-icing agents Other solid and liquid de-icing agents. Requirements and test methods |
| 04/30088146 DC : DRAFT FEB 2004 | EN 1744-5 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF ACID SOLUBLE CHLORIDE SALTS |
| DIN EN 1367-6:2008-12 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL) |
| 14/30313329 DC : 0 | BS EN 16811-1 - WINTER SERVICE EQUIPMENT - DE-ICING AGENTS - PART 1: SODIUM CHLORIDE - REQUIREMENTS AND TEST METHODS |
| UNE-EN 1744-8:2013 | Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
| 06/30158382 DC : 0 | BS EN 15600-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULATE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| I.S. EN 1367-8:2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
| 11/30249131 DC : 0 | BS EN 16333 - SLURRY SURFACING - SPECIFICATION FOR AIRFIELDS |
| I.S. EN ISO 11272:2017 | SOIL QUALITY - DETERMINATION OF DRY BULK DENSITY (ISO 11272:2017) |
| BS EN 16811-2:2016 | Winter service equipment and products. De-icing agents Calcium chloride and Magnesium chloride. Requirements and test methods |
| BS EN 15600-1:2010 | Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for bonded and loose-fill products before installation |
| PREN 1744-5 : DRAFT 2004 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF ACID SOLUBLE CHLORIDE SALTS |
| S.R. CEN/TS 16811-3:2015 | WINTER MAINTENANCE EQUIPMENT - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS |
| UNI EN 1367-6 : 2008 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL) |
| EN 459-2:2010 | Building lime - Part 2: Test methods |
| UNE-EN 1367-7:2015 | Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates |
| I.S. EN 19694-5:2016 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 5: LIME INDUSTRY |
| UNI EN 1744-8 : 2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES |
| I.S. EN 15599-1:2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN 15600-1 : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| I.S. EN 1367-7:2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
| BS EN 16236:2013 | Evaluation of conformity of aggregates. Initial Type Testing and Factory Production Control |
| BS EN 1744-3:2002 | Tests for chemical properties of aggregates Preparation of eluates by leaching of aggregates |
| EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
| BS EN 932-3:1997 | Tests for general properties of aggregates Procedure and terminology for simplified petrographic description |
| I.S. EN 1097-2:2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| UNE-EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
| I.S. EN 12697-28:2000 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 28: PREPARATION OF SAMPLES FOR DETERMINING BINDER CONTENT, WATER CONTENT AND GRADING |
| BS EN 14063-1:2004 | Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products Specification for the loose-fill products before installation |
| BS EN 13286-5:2003 | Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Vibrating table |
| BS EN 1744-5:2006 | Tests for chemical properties of aggregates Determination of acid soluble chloride salts |
| BS EN 932-2:1999 | Tests for general properties of aggregates Methods for reducing laboratory samples |
| EN 13286-5:2003 | Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content - Vibrating table |
| EN 13055:2016 | Lightweight aggregates |
| I.S. EN 1744-4:2005 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES |
| DIN EN 13055-2:2004-09 | LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| DIN EN 13055-1:2002-08 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
| DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08 | WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14063-1:2004-11 | Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation; German version EN 14063-1:2004 |
| EN 13286-1:2003 | Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling |
| EN 1744-4:2005 | Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures |
| ISO 3082:2017 | Iron ores — Sampling and sample preparation procedures |
| ISO 1988:1975 | Hard coal Sampling |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.