DIN EN 1367-8 E : 2014
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
BS EN 1097-11:2013
|
Tests for mechanical and physical properties of aggregates Determination of compressibility and confined compressive strength of lightweight aggregates |
I.S. EN 13055-2:2004
|
LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
BS EN 1367-7:2014
|
Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing of Lightweight aggregates |
07/30166977 DC : DRAFT AUG 2007
|
BS EN 1744-1 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
07/30165780 DC : DRAFT AUG 2007
|
BS EN 1097-5 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN |
BS EN 15599-1:2010
|
Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from expanded perlite (EP) products Specification for bonded and loose-fill products before installation |
09/30207822 DC : 0
|
BS EN 15600-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
PD CEN/TR 15310-4:2006
|
Characterization of waste. Sampling of waste materials Guidance on procedures for sample packaging, storage, preservation, transport and delivery |
BS EN 933-11:2009
|
Tests for geometrical properties of aggregates Classification test for the constituents of coarse recycled aggregate |
10/30218648 DC : DRAFT JUNE 2010
|
BS EN 1744-7 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA AGGREGATE) |
DIN EN 15600-1:2010-12
|
Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
08/30185875 DC : 0
|
BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
DIN EN 15732:2013-01
|
LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
DIN EN 1744-7:2012-05
|
Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
BS EN 15732:2012
|
Light weight fill and thermal insulation products for civil engineering applications (CEA). Expanded clay lightweight aggregate products (LWA) |
11/30241878 DC : 0
|
BS EN 933-6 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES |
06/30153220 DC : 0
|
BS EN 1367-6 - TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6 - RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT |
BS EN 1744-7:2012
|
Tests for chemical properties of aggregates Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
UNE-EN 1367-8:2015
|
Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates |
I.S. EN 1744-7:2012
|
TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH AGGREGATE (MIBA AGGREGATE) |
08/30188887 DC : 0
|
BS EN 933-9 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
I.S. EN 1367-6:2008
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL) |
I.S. EN 1744-8:2012
|
TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES |
UNI EN 1744-7 : 2012
|
TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH - AGGREGATE (MIBA AGGREGATE) |
UNI EN 15732 : 2012
|
LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
DIN EN 1367-2:2010-02
|
Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test |
DIN EN 933-8:2015-07
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
BS EN 1097-4:2008
|
Tests for mechanical and physical properties of aggregates Determination of the voids of dry compacted filler |
BS EN 1097-9:2014
|
Tests for mechanical and physical properties of aggregates Determination of the resistance to wear by abrasion from studded tyres. Nordic test |
BS EN 1097-8:2009
|
Tests for mechanical and physical properties of aggregates Determination of the polished stone value |
UNE-EN 13179-1:2013
|
Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test |
BS EN 1744-6:2006
|
Tests for chemical properties of aggregates Determination of the influence of recycled aggregate extract on the initial setting time of cement |
BS EN 13450:2013
|
Aggregates for railway ballast |
BS EN 1097-1:2011
|
Tests for mechanical and physical properties of aggregates Determination of the resistance to wear (micro-Deval) |
BS EN 1367-3:2001
|
Tests for thermal and weathering properties of aggregates Boiling test for Sonnenbrand basalt |
I.S. EN 1097-1:2011
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL) |
EN 1097-11:2013
|
Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates |
DIN EN 14316-1:2004-11
|
Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 14316-1:2004 |
I.S. EN 1367-2:2009
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULFATE TEST |
EN 1097-10:2014
|
Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height |
I.S. EN 13286-1:2003
|
UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING |
I.S. EN 13286-4:2003
|
UNBOUND AND HYDRAULICALLY BOUND MIXTURES - TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PART 4: VIBRATING HAMMER |
EN 1097-7:2008
|
Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method |
EN 13179-1:2013
|
Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test |
CEN/TR 15310-4 : 2006
|
CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 4: GUIDANCE ON PROCEDURES FOR SAMPLE PACKAGING, STORAGE, PRESERVATION, TRANSPORT AND DELIVERY |
DIN EN 14317-1:2004-11
|
Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 14317-1:2004 |
EN 1097-4:2008
|
Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler |
EN 1097-5:2008
|
Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven |
EN 1097-1:2011
|
Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
EN 13055-1:2002/AC:2004
|
LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
EN 13450:2002/AC:2004
|
AGGREGATES FOR RAILWAY BALLAST |
EN 1097-6:2013
|
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
EN 13055-2:2004
|
Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
EN 13043:2002/AC:2004
|
AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
EN 13286-4:2003
|
UNBOUND AND HYDRAULICALLY BOUND MIXTURES - TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PART 4: VIBRATING HAMMER |
EN 1097-9:2014
|
Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test |
DIN EN 15599-1 E : 2010
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
04/30077125 DC : 0
|
EN 933-11 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATES |
UNI EN 933-11 : 2009
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE |
DIN EN 1367-7:2014-07
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
04/30088151 DC : DRAFT FEB 2004
|
EN 1744-6 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT |
12/30256420 DC : 0
|
BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
00/105661 DC : DRAFT AUG 2000
|
BS EN 1744-4 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES |
16/30320756 DC : 0
|
BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
12/30256925 DC : 0
|
BS EN 13055 - LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
PREN 15600-1 : DRAFT 2009
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
PREN 15732 : DRAFT 2012
|
LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
DIN 4226-2:2002-02
|
AGGREGATES FOR CONCRETE AND MORTAR - PART 2: LIGHTWEIGHT AGGREGATES |
I.S. EN 13055:2016
|
LIGHTWEIGHT AGGREGATES |
UNI EN 1367-7 : 2014
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
I.S. EN 1097-11:2013
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES |
I.S. EN 15600-1:2010
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
NF EN 1097-8 : 2009
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
DIN EN 1367-1:2007-06
|
Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing |
DIN EN 933-6:2014-07
|
Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates |
DIN EN 933-9:2013-07
|
Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test (includes Amendment A1:2013) |
DIN EN 1367-4:2008-06
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE |
17/30348303 DC : 0
|
BS EN 17087 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE FOR TESTING OF RELEASE AND ANALYSIS OF CONTENT |
BS EN 933-9 : 2009
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
UNE-EN 933-1:2012
|
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
BS EN 13055-2:2004
|
Lightweight aggregates Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
BS EN 13286-1:2003
|
Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Introduction, general requirements and sampling |
BS EN 14317-1:2004
|
Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for bonded and loose-fill products before installation |
BS EN 14316-1:2004
|
Thermal insulation products for buildings. In-situ thermal insulation formed from expanded perlite (EP) products Specification for bonded and loose-fill products before installation |
BS EN 933-3:2012
|
Tests for geometrical properties of aggregates Determination of particle shape. Flakiness index |
BS EN 933-1:2012
|
Tests for geometrical properties of aggregates Determination of particle size distribution. Sieving method |
I.S. EN 933-10:2009
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING) |
I.S. EN 933-6:2014
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES |
I.S. EN 1367-1:2007
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING |
I.S. EN 1097-5:2008
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN |
I.S. EN 13179-1:2013
|
TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST |
I.S. EN 13450:2013
|
AGGREGATES FOR RAILWAY BALLAST |
I.S. EN 933-1:2012
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD |
I.S. EN 1097-7:2008
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD |
I.S. EN 933-3:2012
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF PARTICLE SHAPE - FLAKINESS INDEX |
I.S. EN 1097-6:2013
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION |
I.S. EN 933-8:2012
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
I.S. EN 933-9:2009
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
I.S. EN 1097-4:2008
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER |
I.S. EN 933-4:2008
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX |
I.S. EN 1367-4:2008
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE |
DIN EN 12697-11:2012-07
|
BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN |
I.S. EN 1097-9:2014
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST |
DIN EN 933-6:2002-02
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES |
I.S. EN 1744-1:2009
|
TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
ONORM EN 1097-7 : 2009
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD |
UNE-EN 1744-7:2012
|
Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
DIN EN 1367-8:2014-07
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
DIN EN 1097-11 E : 2013
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES |
BS EN 13055:2016
|
Lightweight aggregates |
DIN EN 1097-11:2013-11
|
Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates |
DIN EN 1744-8:2012-11
|
Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
08/30185872 DC : 0
|
BS EN 933-10 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING) |
I.S. EN 13055-1:2002
|
LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
07/30166974 DC : DRAFT AUG 2007
|
BS EN 1367-2 - TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULPHATE TEST |
DIN EN 15599-1:2010-12
|
Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
09/30207815 DC : 0
|
BS EN 15599-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
UNI EN 15599-1 : 2010
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
UNI EN 1097-11 : 2013
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES |
UNI EN 1367-8 : 2014
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
06/30153237 DC : DRAFT JULY 2006
|
BS ISO 16003 - COMPONENTS FOR GASEOUS MEDIA AND FIRE EXTINGUISHING SYSTEMS - REQUIREMENTS AND TEST METHODS - CONTAINER VALVE ASSEMBLIES AND THEIR ACTUATORS, SELECTOR VALVES AND THEIR ACTUATORS, NOZZLES, FLEXIBLE CONNECTORS, AND CHECK VALVES AND NON-RETURN VALVES |
10/30218642 DC : DRAFT JUNE 2010
|
BS EN 1097-6 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION |
PREN 933-9 : DRAFT 2008
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
BS EN 1367-6:2008
|
Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing in the presence of salt (NaCl) |
I.S. EN 15732:2012
|
LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
PREN 15599-1 : DRAFT 2009
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
PREN 933-10 : DRAFT 2008
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING) |
DIN EN 1744-4:2005-10
|
Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures |
DIN EN 1744-1:2013-03
|
TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
DIN EN 1744-5:2006-12
|
Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts |
DIN EN 933-3:2012-04
|
Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index |
DIN EN 933-1:2012-03
|
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
DIN EN 1744-6:2006-12
|
Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement |
DIN EN 1097-10:2014-09
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
DIN EN 1097-4:2008-06
|
Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler |
DIN EN 1097-1:2011-04
|
Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
DIN EN 1097-8:2016-07 (Draft)
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
DIN EN 933-10:2009-10
|
Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving) |
DIN EN 1097-5:2008-06
|
Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven |
DIN EN 14317-1 E : 2004
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
DIN EN 1097-6:2013-09
|
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
EN 1097-8:2009
|
Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value |
BS EN 1097-5:2008
|
Tests for mechanical and physical properties of aggregates Determination of the water content by drying in a ventilated oven |
BS EN 933-6:2014
|
Tests for geometrical properties of aggregates Assessment of surface characteristics. Flow coefficient of aggregates |
BS EN 13286-4:2003
|
Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Vibrating hammer |
UNI EN 1097-7 : 2008
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD |
UNI EN 1744-1 : 2013
|
TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
UNI EN 14063-1 : 2005
|
THERMAL INSULATION MATERIALS AND PRODUCTS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
UNI EN 933-3 : 2012
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF PARTICLE SHAPE - FLAKINESS INDEX |
UNI EN 1367-2 : 2010
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULFATE TEST |
UNI EN 1367-1 : 2007
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING |
UNI EN 933-6 : 2014
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES |
UNI EN 1367-4 : 2008
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE |
UNI EN 13179-1 : 2013
|
TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST |
UNI EN 1097-5 : 2008
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN |
UNI EN 933-1 : 2012
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD |
UNI EN 933-4 : 2008
|
TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX |
UNI EN 13043 : 2013
|
AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
UNI EN 1097-10 : 2014
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
UNI EN 1744-6 : 2007
|
TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF RECYCLED AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT |
I.S. EN 13043:2013
|
AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
UNI EN 1097-1 : 2011
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL) |
UNI EN 1097-9 : 2014
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST |
UNI EN 933-10 : 2009
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING) |
UNI EN 1097-4 : 2008
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER |
UNI EN 13450 : 2013
|
AGGREGATES FOR RAILWAY BALLAST |
UNE-EN 1097-11:2013
|
Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates |
BS EN 1367-8:2014
|
Tests for thermal and weathering properties of aggregates Determination of resistance to disintegration of Lightweight Aggregates |
I.S. EN 933-11:2009
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE |
07/30165777 DC : DRAFT AUG 2007
|
BS EN 1097-4 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER |
DIN EN 1367-7 E : 2014
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
07/30170936 DC : 0
|
BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
11/30231793 DC : 0
|
BS EN 16262 - SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES |
07/30165783 DC : DRAFT AUG 2007
|
BS EN 1097-7 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD |
BS EN 1744-8:2012
|
Tests for chemical properties of aggregates Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
NF EN 15600-1 : 2010
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
07/30165774 DC : DRAFT AUG 2007
|
BS EN 933-4 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX |
DIN EN 933-11:2011-05
|
Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate (includes Corrigendum AC:2009) |
NF EN 15599-1 : 2010
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
PREN 933-6 : DRAFT 2011
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES |
18/30368675 DC : 0
|
BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
15/30326284 DC : 0
|
BS EN 16907-2 - EARTHWORKS - PART 2: CLASSIFICATION OF MATERIALS |
I.S. CEN TR 15310-4:2006
|
CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 4: GUIDANCE ON PROCEDURES FOR SAMPLE PACKAGING, STORAGE, PRESERVATION, TRANSPORT AND DELIVERY |
DIN EN 933-4:2015-01
|
Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index |
DIN EN 1097-2:2016-07 (Draft)
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
DIN EN 1097-7:2008-06
|
Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method |
DIN EN 1097-3:1998-06
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF LOOSE BULK DENSITY AND VOIDS |
DIN EN 14063-1:2016-10 (Draft)
|
Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation; German and English version prEN 14063-1:2016 |
DIN EN 1097-9:2014-03
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST |
BS EN 12697-11:2012
|
Bituminous mixtures. Test methods for hot mix asphalt Determination of the affinity between aggregate and bitumen |
BS EN 1744-1 : 2009
|
TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
I.S. EN 1097-2:2010
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
BS EN 933-4:2008
|
Tests for geometrical properties of aggregates Determination of particle shape. Shape index |
UNE-EN 933-3:2012
|
Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index |
UNI EN 1097-8 : 2009
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
BS EN 933-10:2009
|
Tests for geometrical properties of aggregates Assessment of fines. Grading of filler aggregates (air jet sieving) |
UNI EN 1097-2 : 2010
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
UNE-EN 1744-1:2010
|
Tests for chemical properties of aggregates - Part 1: Chemical analysis |
EN 12697-11:2012
|
BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN |
I.S. EN 12697-11:2012
|
BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN |
BS EN 13055-1:2002
|
Lightweight aggregates Lightweight aggregates for concrete, mortar and grout |
BS EN 1367-2:2009
|
Tests for thermal and weathering properties of aggregates Magnesium sulfate test |
UNI EN 12697-11 : 2012
|
BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN |
BS EN 1367-1:2007
|
Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing |
UNE-EN 1097-6:2014
|
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
BS EN 1744-4:2005
|
Tests for chemical properties of aggregates Determination of water susceptibility of fillers for bituminous mixtures |
BS EN 1097-2:2010
|
Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
BS EN 1097-6:2013
|
Tests for mechanical and physical properties of aggregates Determination of particle density and water absorption |
UNE-EN 1097-9:2014
|
Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test |
BS EN 933-8 : 2012
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
BS EN 13179-2:2000
|
Test for filler aggregate used in bituminous mixtures Bitumen number |
I.S. EN 1097-8:2009
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
UNE-EN 1097-1:2011
|
Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
BS EN 1367-4:2008
|
Tests for thermal and weathering properties of aggregates Determination of drying shrinkage |
EN 1367-6:2008
|
Tests for thermal and weathering properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl) |
EN 14063-1:2004/AC:2006
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
UNI EN 933-9 : 2013
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
EN 14317-1:2004
|
Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
EN 1744-1:2009+A1:2012
|
Tests for chemical properties of aggregates - Part 1: Chemical analysis |
EN 14316-1:2004
|
Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
EN 1367-7:2014
|
Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates |
EN 933-11:2009/AC:2009
|
TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE |
UNI EN 1097-6 : 2013
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION |
EN 933-8:2012+A1:2015
|
Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test |
EN 933-1:2012
|
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
EN 15600-1:2010
|
Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
EN 1367-8:2014
|
Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates |
ONORM EN 1744-4 : 2005
|
TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES |
EN 1367-4:2008
|
Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage |
EN 1744-6:2006
|
Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement |
EN 15599-1:2010
|
Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
EN 1367-2:2009
|
Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test |
EN 1744-7:2012
|
Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
EN 933-9:2009+A1:2013
|
Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test |
EN 1744-5:2006
|
Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts |
EN 933-4:2008
|
Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index |
EN 15732:2012
|
Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) |
EN 933-6:2014
|
Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates |
EN 1744-3:2002
|
Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates |
EN 1367-3:2001/AC:2004
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 3: BOILING TEST FOR "SONNENBRAND BASALT" |
EN 933-3:2012
|
Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index |
EN 933-10:2009
|
Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving) |
EN 1367-1:2007
|
Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing |
EN 1744-8:2012
|
Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
DIN EN 1744-8 E : 2012
|
TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES |
DIN EN 15600-1 E : 2010
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
UNE-EN 15732:2014
|
Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) |
06/30158376 DC : 0
|
BS EN 15599-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
04/30088146 DC : DRAFT FEB 2004
|
EN 1744-5 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF ACID SOLUBLE CHLORIDE SALTS |
DIN EN 1367-6:2008-12
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL) |
16/30320762 DC : 0
|
BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
UNE-EN 1744-8:2013
|
Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
06/30158382 DC : 0
|
BS EN 15600-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULATE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
I.S. EN 1367-8:2014
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
DIN EN 15732 E : 2013
|
LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
BS EN 15600-1:2010
|
Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for bonded and loose-fill products before installation |
PREN 1744-5 : DRAFT 2004
|
TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF ACID SOLUBLE CHLORIDE SALTS |
UNI EN 1367-6 : 2008
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL) |
UNE-EN 1367-7:2015
|
Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates |
PREN 1097-8 : DRAFT 2016
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
UNI EN 1744-8 : 2012
|
TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES |
I.S. EN 15599-1:2010
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
UNI EN 15600-1 : 2010
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
I.S. EN 1367-7:2014
|
TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
BS EN 1744-3:2002
|
Tests for chemical properties of aggregates Preparation of eluates by leaching of aggregates |
EN 1097-2:2010
|
Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
BS EN 1097-10:2014
|
Tests for mechanical and physical properties of aggregates Determination of water suction height |
BS EN 1097-7:2008
|
Tests for mechanical and physical properties of aggregates Determination of the particle density of filler. Pyknometer method |
BS EN 14063-1:2004
|
Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products Specification for the loose-fill products before installation |
BS EN 13043:2013
|
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
UNE-EN 1097-10:2015
|
Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height |
BS EN 13179-1:2013
|
Tests for filler aggregate used in bituminous mixtures Delta ring and ball test |
BS EN 1744-5:2006
|
Tests for chemical properties of aggregates Determination of acid soluble chloride salts |
EN 13055 : 2016
|
LIGHTWEIGHT AGGREGATES |
EN 13179-2:2000
|
Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number |
I.S. EN 1744-4:2005
|
TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES |
DIN EN 13055-2:2004-09
|
LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
DIN EN 13055-1:2002-08
|
LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
DIN EN 1097-10:2003-03
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
DIN EN 14063-1:2004-11
|
Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation; German version EN 14063-1:2004 |
I.S. EN 1097-10:2014
|
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
EN 13286-1:2003
|
UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING |
EN 1744-4:2005
|
Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures |
UNE-EN 933-9:2010
|
Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test |