EN IEC 62928:2018
Current
The latest, up-to-date edition.
Railway applications - Rolling stock - Onboard lithium-ion traction batteries
13-04-2018
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Configuration of battery system
5 Parameter measurement tolerances
6 Operational conditions
7 Designation and marking
8 Safety requirements
9 Dimensions
10 Electrical requirements
11 Mechanical requirement
12 Performance requirement
13 Storage and transportation conditions
14 Tests
Annex A (informative) - Examples of battery system
configuration
Annex B (informative) - Examples of parameter ranges
for additional high power cycling tests
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
IEC 62928:2017 specifies the design, operation parameters, safety recommendations, data exchange, routine and type tests, as well as marking and designation for onboard lithium-ion traction batteries for railway applications. Battery systems described in this document are used for the energy storage system (ESS) for the traction power of railway vehicles such as hybrid vehicles as defined in IEC62864-1:2016.
| Committee |
CLC/TC 9X
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN IEC 62928:2018 | Identical |
| IEC 62928:2017 | Identical |
| NF EN IEC 62928 : 2018 | Identical |
| VDE 0115-928:2018-10 | Identical |
| NEN-EN-IEC 62928 : 2018 | Identical |
| BS EN IEC 62928:2018 | Identical |
| CEI EN IEC 62928:2018 | Identical |
| DIN EN IEC 62928 : 2018-10 | Identical |
| SN EN IEC 62928 : 2018 | Identical |
| I.S. EN IEC 62928:2018 | Identical |
| OVE EN IEC 62928:2018 | Identical |
| SS-EN IEC 62928 : 2018 | Identical |
| IEC 62620:2014 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| IEC 62279:2015 | Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems |
| IEC 61287-1:2014 | Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
| IEC 61123:1991 | Reliability testing - Compliance test plans for success ratio |
| IEC 61373:2010 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| IEC 60050-811:1991 | International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction |
| IEC 61133:2016 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| EN 61373:2010/AC:2017-09 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010) |
| IEC 62864-1:2016 | Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system |
| IEC 60050-482:2004 | International Electrotechnical Vocabulary (IEV) - Part 482: Primary and secondary cells and batteries |
| IEC 60850:2014 | Railway applications - Supply voltages of traction systems |
| IEC 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| IEC 62485-3:2014 | Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| IEC 61377:2016 | Railway applications - Rolling stock - Combined test method for traction systems |
| IEC 60077-2:2017 | Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules |
| EN 60077-5:2003 | Railway applications - Electrotechnical equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 62864-1:2016 | Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system |
| NFPA 130 : 2017 | FIXED GUIDEWAY TRANSIT AND PASSENGER RAIL SYSTEMS |
| IEC 62278:2002 | Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS) |
| IEC 60721-3-2:1997 | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation |
| IEC 61991:2000 | Railway applications - Rolling stock - Protective provisions against electrical hazards |
| IEC 60571:2012 | Railway applications - Electronic equipment used on rolling stock |
| EN 50272-2:2001 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| EN 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| IEC 62236-3-2:2008 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
| EN 62620:2015 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications |
| IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
| IEC 61434:1996 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Guide to designation of current in alkaline secondary cell and battery standards |
| IEC 62497-1:2010+AMD1:2013 CSV | Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electricaland electronic equipment |
| UIC 640 : 3ED 2003 | MOTIVE POWER UNITS - INSCRIPTIONS, MARKS AND SIGNS |
| IEC 60077-1:2017 | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| UIC 550 : 11ED 2005 | POWER SUPPLY INSTALLATIONS FOR PASSENGER STOCK |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN ISO 7010 : 2012 AMD 7 2017 | GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 7:2016) |
| IEC 62498-1:2010 | Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock |
| IEC 60077-5:2003 | Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.