EN ISO 10432:2004

Current

Current The latest, up-to-date edition.

Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004)

Available format(s):

Language(s):

Published date: 15-12-2004

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Functional specification
  5.1 General
  5.2 SSSV functional characteristics
  5.3 Well parameters
  5.4 Operational parameters
  5.5 Environmental compatibility
  5.6 Compatibility with related well equipment
6 Technical specification
  6.1 Technical requirements
  6.2 Technical characteristics of SSSV
  6.3 Design criteria
  6.4 Design verification
  6.5 Design validation
  6.6 Design changes
  6.7 Functional test
7 Supplier/manufacturer requirements
  7.1 General
  7.2 Raw material
  7.3 Heat-treating-equipment qualification
  7.4 Traceability
  7.5 Components undergoing special processes
  7.6 Quality control
  7.7 SSSV functional testing
  7.8 Product identification
  7.9 Documentation and data control
  7.10 Failure reporting and analysis
8 Repair/redress
  8.1 Repair
  8.2 Redress
9 Storage and preparation for transport
Annex A (normative) Test agency requirements
Annex B (normative) Validation testing requirements
Annex C (normative) Functional testing requirements
Annex D (informative) Optional requirement for closure
        mechanism minimal leakage
Annex E (informative) Operating envelope
Annex F (normative) Data requirements, figures/schematics,
        and tables
Bibliography

Abstract - (Show below) - (Hide below)

ISO 10432:2004 provides the minimum acceptable requirements for subsurface safety valves (SSSVs).

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 12
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
I.S. EN ISO 10432:2005	Identical
NS EN ISO 10432 : 2ED 2005	Identical
UNE-EN ISO 10432:2004	Identical
NF EN ISO 10432 : 2005	Identical
NEN EN ISO 10432 : 2005	Identical
BS EN ISO 10432:2004	Identical
NBN EN ISO 10432 : 2005	Identical
PN EN ISO 10432 : 2008	Identical
ISO 10432:2004	Identical
SN EN ISO 10432 : 2000	Identical
DIN EN ISO 10432:2005-07	Identical
UNI EN ISO 10432 : 2006	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

14/30298608 DC : 0	BS EN 1918-5 - GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 5: FUNCTIONAL REQUIREMENTS FOR SURFACE FACILITIES
BS EN 1918-4:1998	Gas supply systems. Underground gas storage Functional recommendations for storage in rock caverns
BS EN 1918-3:1998	Gas supply systems. Underground gas storage Functional recommendations for storage in solution-mined salt cavities
I.S. EN 1918-1:2016	GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 1: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN AQUIFERS
I.S. EN 1918-3:2016	GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 3: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN SOLUTIONMINED SALT CAVERNS
I.S. EN 1918-2:2016	GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 2: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN OIL AND GAS FIELDS
I.S. EN 1918-4:2016	GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 4: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN ROCK CAVERNS
PREN 1918-2 : DRAFT 2014	GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 2: FUNCTIONAL REQUIREMENTS FOR STORAGE IN OIL AND GAS FIELDS
PREN 1918-5 : DRAFT 2014	GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 5: FUNCTIONAL REQUIREMENTS FOR SURFACE FACILITIES
BS EN 1918-2:1998	Gas supply systems. Underground gas storage Functional recommendations for storage in oil and gas fields
14/30298596 DC : 0	BS EN 1918-2 - GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 2: FUNCTIONAL REQUIREMENTS FOR STORAGE IN OIL AND GAS FIELDS
BS EN 1918-1:2016	Gas infrastructure. Underground gas storage Functional recommendations for storage in aquifers
EN 1918-3:2016	Gas infrastructure - Underground gas storage - Part 3: Functional recommendations for storage in solution-mined salt caverns
EN 1918-2:2016	Gas infrastructure - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields
EN 1918-4:2016	Gas infrastructure - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns
EN 1918-1:2016	Gas infrastructure - Underground gas storage - Part 1: Functional recommendations for storage in aquifers

Standards Referencing This Book - (Show below) - (Hide below)

ISO 6507-1:2005	Metallic materials Vickers hardness test Part 1: Test method
ASME PV CODE 8 DIV 2 : 2017	BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES
ISO/IEC 17025:2005	General requirements for the competence of testing and calibration laboratories
ISO 6506-1:2014	Metallic materials Brinell hardness test Part 1: Test method
ASTM E 446 : 2015 : REDLINE	Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ASNT SNT TC 1A : 2016	TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
ASTM E 186 : 2015 : REDLINE	Standard Reference Radiographs for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings
ISO/TS 29001:2010	Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations
ASME PV CODE 9 : 2017	BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
ISO 9712:2012	Non-destructive testing Qualification and certification of NDT personnel
ISO 13628-3:2000	Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems
ASTM D 1414 : 2015 : REDLINE	Standard Test Methods for Rubber O-Rings
ASME PV CODE 8 DIV 1 : 2017	BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
ISO 6508-1:2016	Metallic materials — Rockwell hardness test — Part 1: Test method
ISO 13679:2002	Petroleum and natural gas industries Procedures for testing casing and tubing connections
ISO 6892:1998	Metallic materials Tensile testing at ambient temperature
API 14A : 2015	SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
ASME PV CODE 8 DIV 3 : 2017	BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS
SAE AS 568 : 2014	AEROSPACE SIZE STANDARD FOR O-RINGS
ISO 16070:2005	Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples
ISO 10417:2004	Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress
API MPM CH10.4 : 2013	MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.4: DETERMINATION OF WATER AND/OR SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (FIELD PROCEDURE)
NACE MR 01 75 : 2003	METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS
ISO 15156-2:2015	Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
ANSI/NCSL Z540 1 : 94(R2002)	CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS
ISO 15156-3:2015	Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
ISO 15156-1:2015	Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials
ISO 13665:1997	Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections
API 5C3 : 1994	BULLETIN ON FORMULAS AND CALCULATIONS FOR CASING, TUBING, DRILL PIPE AND LINE PIPE PROPERTIES
ASME PV CODE 5 : 2017	BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION
ASTM E 280 : 2015 : REDLINE	Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings
ISO 9000:2015	Quality management systems — Fundamentals and vocabulary
BS 2M 54:1991	Specification for temperature control in the heat treatment of metals
ISO 3601-1:2012	Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes
ASTM E 709 : 2015 : REDLINE	Standard Guide for Magnetic Particle Testing
SAE AMS H 6875 : 2010	HEAT TREATMENT OF STEEL RAW MATERIALS
ISO 3601-3:2005	Fluid power systems O-rings Part 3: Quality acceptance criteria
ISO 48:2010	Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
API 5C5 : 2017	PROCEDURES FOR TESTING CASING AND TUBING CONNECTIONS
ASTM D 638 : 2014 : REDLINE	Standard Test Method for Tensile Properties of Plastics
MIL-STD-413 Revision C:1980	VISUAL INSPECTION GUIDE FOR ELASTOMERIC O-RINGS
ISO 10414-1:2008	Petroleum and natural gas industries — Field testing of drilling fluids — Part 1: Water-based fluids
ISO 527-1:2012	Plastics Determination of tensile properties Part 1: General principles
ISO/IEC Guide 22:1996	General criteria for supplier's declaration of conformity

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart