ISO 6507-1:2005
|
Metallic materials Vickers hardness test Part 1: Test method |
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
ISO 6506-1:2014
|
Metallic materials Brinell hardness test Part 1: Test method |
ASTM E 446 : 2015 : REDLINE
|
Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness |
ASNT SNT TC 1A : 2016
|
TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
ASTM E 186 : 2015 : REDLINE
|
Standard Reference Radiographs for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings |
ISO/TS 29001:2010
|
Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
ISO 9712:2012
|
Non-destructive testing Qualification and certification of NDT personnel |
ISO 13628-3:2000
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems |
ASTM D 1414 : 2015 : REDLINE
|
Standard Test Methods for Rubber O-Rings |
ISO 6508-1:2016
|
Metallic materials — Rockwell hardness test — Part 1: Test method |
ISO 13679:2002
|
Petroleum and natural gas industries Procedures for testing casing and tubing connections |
ISO 6892:1998
|
Metallic materials Tensile testing at ambient temperature |
API 14A : 2015
|
SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
SAE AS 568 : 2014
|
AEROSPACE SIZE STANDARD FOR O-RINGS |
ISO 16070:2005
|
Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
ISO 10417:2004
|
Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress |
API MPM CH10.4 : 2013
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.4: DETERMINATION OF WATER AND/OR SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (FIELD PROCEDURE) |
NACE MR 01 75 : 2003
|
METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS |
ISO 15156-2:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
ANSI/NCSL Z540 1 : 94(R2002)
|
CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS |
ISO 15156-3:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
ISO 15156-1:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials |
ISO 13665:1997
|
Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections |
API 5C3 : 1994
|
BULLETIN ON FORMULAS AND CALCULATIONS FOR CASING, TUBING, DRILL PIPE AND LINE PIPE PROPERTIES |
ASTM E 280 : 2015 : REDLINE
|
Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings |
ISO 9000:2015
|
Quality management systems — Fundamentals and vocabulary |
BS 2M 54:1991
|
Specification for temperature control in the heat treatment of metals |
ISO 3601-1:2012
|
Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
ASTM E 709 : 2015 : REDLINE
|
Standard Guide for Magnetic Particle Testing |
SAE AMS H 6875 : 2010
|
HEAT TREATMENT OF STEEL RAW MATERIALS |
ISO 3601-3:2005
|
Fluid power systems O-rings Part 3: Quality acceptance criteria |
ISO 48:2010
|
Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
API 5C5 : 2017
|
PROCEDURES FOR TESTING CASING AND TUBING CONNECTIONS |
ASTM D 638 : 2014 : REDLINE
|
Standard Test Method for Tensile Properties of Plastics |
MIL-STD-413 Revision C:1980
|
VISUAL INSPECTION GUIDE FOR ELASTOMERIC O-RINGS |
ISO 10414-1:2008
|
Petroleum and natural gas industries — Field testing of drilling fluids — Part 1: Water-based fluids |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |
ISO/IEC Guide 22:1996
|
General criteria for supplier's declaration of conformity |