EN ISO 13370:2017
Current
The latest, up-to-date edition.
Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:2017)
19-07-2017
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and subscripts
5 Description of the method
6 Calculation of heat transfer via the ground
7 Calculation of thermal transmittances
Annex A (normative) - Input and method selection data
sheet - Template
Annex B (informative) - Input and method selection data
sheet - Default choices
Annex C (normative) - Calculation of ground heat flow rate
Annex D (normative) - Slab-on-ground with edge insulation
Annex E (informative) - Heat flow rates for edge and central
regions of a building
Annex F (normative) - Application to dynamic calculation
programmes
Annex G (normative) - Ventilation below suspended floors
Annex H (normative) - Periodic heat transfer coefficients
Bibliography
ISO 13370:2017 provides methods of calculation of heat transfer coefficients and heat flow rates for building elements in thermal contact with the ground, including slab‐on‐ground floors, suspended floors and basements. It applies to building elements, or parts of them, below a horizontal plane in the bounding walls of the building situated- at the level of the inside floor surface, for slab‐on‐ground floors, suspended floors and unheated basements;NOTE 1 In some cases, external dimension systems define the boundary at the lower surface of the floor slab.- at the level of the external ground surface, for heated basements.ISO 13370:2017 includes calculation of the steady‐state part of the heat transfer (the annual average rate of heat flow) and the part due to annual periodic variations in temperature (the seasonal variations of the heat flow rate about the annual average). These seasonal variations are obtained on a monthly basis and, except for the application to dynamic simulation programmes in Annex D, ISO 13370:2017 does not apply to shorter periods of time.NOTE 2 Table 1 in the Introduction shows the relative position of ISO 13370:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.
| Committee |
CEN/TC 89
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN ISO 13370:2015-06 (Draft) | Identical |
| UNE-EN ISO 13370:2010 | Identical |
| PN EN ISO 13370 : 2017-09 | Identical |
| UNI EN ISO 13370:2018 | Identical |
| BS EN ISO 13370:2017 | Identical |
| I.S. EN ISO 13370:2017 | Identical |
| ISO 13370:2017 | Identical |
| NEN EN ISO 13370 : 2017 | Identical |
| DIN EN ISO 13370:2018-03 | Identical |
| UNI EN ISO 13370 : 2008 | Identical |
| ONORM EN ISO 13370 : 2018 | Identical |
| SS-EN ISO 13370:2017 | Identical |
| NS EN ISO 13370 : 2017 | Identical |
| I.S. EN ISO 13370:2007 | Identical |
| SN EN ISO 13370 : 2017 | Identical |
| NBN EN ISO 13370 : 2008 | Identical |
| NF EN ISO 13370 : 2017 | Identical |
| UNE-EN ISO 13370:2017 | Identical |
| PNE-EN ISO 13370 | Identical |
| PREN ISO 13791 : DRAFT 2010 | THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - GENERAL CRITERIA AND VALIDATION PROCEDURES |
| 15/30325699 DC : 0 | BS EN ISO 52000-1 - ENERGY PERFORMANCE OF BUILDINGS - OVERARCHING EPB ASSESSMENT - PART 1: GENERAL FRAMEWORK AND PROCEDURES |
| I.S. EN ISO 13792:2012 | THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - SIMPLIFIED METHODS (ISO 13792:2012) |
| 10/30202116 DC : 0 | BS EN ISO 13791 - THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - GENERAL CRITERIA AND VALIDATION PROCEDURES |
| I.S. EN ISO 13791:2012 | THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - GENERAL CRITERIA AND VALIDATION PROCEDURES (ISO 13791:2012) |
| 10/30202119 DC : 0 | BS EN ISO 13792 - THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - SIMPLIFIED METHODS |
| BS EN 15316-2-1:2007 | Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies Space heating emission systems |
| I.S. EN 15377-1:2008 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 1: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY |
| UNI EN 15377-2 : 2008 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 2: DESIGN, DIMENSIONING AND INSTALLATION |
| BS EN 12831:2003 | Heating systems in buildings. Method for calculation of the design heat load |
| EN 12831:2003 | Heating systems in buildings - Method for calculation of the design heat load |
| EN 12831-1:2017 | Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load, Module M3-3 |
| BS EN 12831-1:2017 | Energy performance of buildings. Method for calculation of the design heat load Space heating load, Module M3-3 |
| UNI EN 15377-1 : 2008 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 1: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY |
| I.S. EN 12831-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD, MODULE M3-3 |
| DIN EN 15255:2007-11 | ENERGY PERFORMANCE OF BUILDINGS - SENSIBLE ROOM COOLING LOAD CALCULATION - GENERAL CRITERIA AND VALIDATION PROCEDURES |
| BS EN ISO 13792:2012 | Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. Simplified methods |
| DIN EN 15316-2-1:2007-10 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2-1: SPACE HEATING EMISSION SYSTEMS |
| VDI 2078:2015-06 | Calculation of thermal loads and room temperatures (design cooling load and annual simulation) |
| 99/104649 DC : DRAFT MAY 1999 | EN ISO 13790 - THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF ENERGY USE FOR HEATING |
| I.S. EN 15316-2-1:2007 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2-1: SPACE HEATING EMISSION SYSTEMS |
| CEN/TR 15615:2008 | Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD) - Umbrella Document |
| PREN ISO 13792 : DRAFT 2010 | THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - SIMPLIFIED METHODS |
| UNI EN ISO 13792 : 2012 | THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - SIMPLIFIED METHODS |
| UNI EN 12831 : 2006 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD |
| 14/30309932 DC : 0 | BS EN 12831-1 - HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD |
| BS EN 15377-2:2008 | Heating systems in buildings. Design of embedded water based surface heating and cooling systems Design, dimensioning and installation |
| UNE-EN ISO 13791:2013 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2012) |
| I.S. EN 15377-2:2008 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 2: DESIGN, DIMENSIONING AND INSTALLATION |
| DIN 4108 Beiblatt 2:2006-03 | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - THERMAL BRIDGES - EXAMPLES FOR PLANNING AND PERFORMANCE |
| BS EN ISO 13793:2001 | Thermal performance of buildings. Thermal design of foundations to avoid frost heave |
| EN 15377-2:2008 | Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 2: Design, dimensioning and installation |
| EN ISO 13792:2012 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods (ISO 13792:2012) |
| EN ISO 13791:2012 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2012) |
| EN 15377-1:2008 | Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 1: Determination of the design heating and cooling capacity |
| EN 15316-2-1:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-1: Space heating emission systems |
| DIN EN 12831-1:2017-09 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD, MODULE M3-3 |
| I.S. EN 12831:2003 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD |
| UNE-EN ISO 13792:2013 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods (ISO 13792:2012) |
| PD CEN/TR 15615:2008 | Explanation of the general relationship between various CEN standards and the Energy Performance of Buildings Directive (EPBD). Umbrella document |
| ISO 13792:2012 | Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling Simplified methods |
| DIN EN 15377-1:2009-02 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 1: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY |
| DIN EN 15377-2:2008-11 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 2: DESIGN, DIMENSIONING AND INSTALLATION |
| DIN EN ISO 13791:2012-08 | THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF INTERNAL TEMPERATURES OF A ROOM IN SUMMER WITHOUT MECHANICAL COOLING - GENERAL CRITERIA AND VALIDATION PROCEDURES (ISO 13791:2012) |
| ISO 13789:2017 | Thermal performance of buildings — Transmission and ventilation heat transfer coefficients — Calculation method |
| CEN/TS 16629:2014 | Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards |
| ISO 10211:2017 | Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations |
| CEN/TS 16628:2014 | Energy Performance of Buildings - Basic Principles for the set of EPB standards |
| ISO 52016-1:2017 | Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 1: Calculation procedures |
| ISO 52000-1:2017 | Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures |
| ISO/TR 52019-2:2017 | Energy performance of buildings Hygrothermal performance of building components and building elements Part 2: Explanation and justification |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| ISO/TR 52000-2:2017 | Energy performance of buildings Overarching EPB assessment Part 2: Explanation and justification of ISO 52000-1 |
| ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
| ISO 7345:1987 | Thermal insulation Physical quantities and definitions |
| ISO 14683:2017 | Thermal bridges in building construction — Linear thermal transmittance — Simplified methods and default values |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.