Skip to content
Please enter a keyword to search

  • EN ISO 15616-1:2003

    Current The latest, up-to-date edition.

    Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003)

    Available format(s): 

    Language(s): 

    Published date:  01-03-2003

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms, definitions and symbols
    4 Acceptance test conditions
       4.1 Setting up the CO[2]-laser beam machine
       4.2 Power supply
       4.3 Health, safety and environment
       4.4 Cooling system
       4.5 Gas supply and gas supply system
       4.6 Operation instructions
    5 Acceptance test principles
       5.1 Range of system settings
       5.2 Limit deviations
       5.3 Precision required
       5.4 Acceptance report
    6 Acceptance test
       6.1 General
       6.2 General properties
       6.3 Examination of the focused laser beam
       6.4 Manipulation system precision, positioning
            accuracy and trajectory exactness
       6.5 Welding and cutting speed
       6.6 Working gas: testing and instrumentation
    Bibliography

    Abstract - (Show below) - (Hide below)

    ISO 15616-1:2003 is applicable to CO2-laser beam machines for welding and cutting in two operating directions.The main purpose of this International Standard is to provide requirements for acceptance testing of CO2-laser beam machines prior to or during installation at the user's premises. The acceptance tests are used to document the ability of CO2-laser beam machines to produce welded joints and cuts of consistent quality.ISO 15616-1:2003 is intended to be used for preparation of the technical specification for CO2-laser beam machines for high quality welding and cutting in two operating directions. It specifies basic requirements. However, this International Standard may also be used for testing as part of maintenance, as appropriate.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 121
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    09/30197751 DC : 0 BS EN 4678 - AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS
    BS EN 1011-6:2005 Welding. Recommendations for welding of metallic materials Laser beam welding
    BS EN 4678:2011 Aerospace series. Weldments and brazements for aerospace structures. Joints of metallic materials by laser beam welding. Quality of weldments
    BS EN ISO 15616-2:2003 Acceptance tests for CO2- laser beam machines for high quality welding and cutting Measurement of static and dynamic accuracy
    03/115225 DC : DRAFT SEP 2003 BS EN 1011-6 - WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING
    DIN EN 1011-6:2006-03 WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING
    ISO 15616-2:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 2: Measurement of static and dynamic accuracy
    EN 1011-6:2005 Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding
    UNI EN 4678 : 2012 AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS
    I.S. EN 1011-6:2006 WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING
    ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 3: Calibration of instruments for measurement of gas flow and pressure
    BS EN ISO 15616-3:2003 Acceptance tests for CO2- laser beam machines for high quality welding and cutting Calibration of instruments for measurement of gas flow and pressure
    EN ISO 15616-2:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003)
    EN 4678:2011 Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments
    EN ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
    I.S. EN 4678:2011 AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS
    DIN EN ISO 15616-2 E : 2003 ACCEPTANCE TESTS FOR CO[2]-LASER BEAM MACHINES FOR HIGH QUALITY WELDING AND CUTTING - PART 2: MEASUREMENT OF STATIC AND DYNAMIC ACCURACY
    DIN EN ISO 15616-3 E : 2003 ACCEPTANCE TESTS FOR CO[2]-LASER BEAM MACHINES FOR HIGH QUALITY WELDING AND CUTTING - PART 3: CALIBRATION OF INSTRUMENTS FOR MEASUREMENT OF GAS FLOW AND PRESSURE
    PREN 4678 : 200P1 AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS

    Standards Referencing This Book - (Show below) - (Hide below)

    EN ISO 15616-2:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003)
    IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
    EN 60825-4:2006/A2:2011 SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS
    ISO 11554:2017 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics
    ISO 11146:1999 Lasers and laser-related equipment Test methods for laser beam parameters Beam widths, divergence angle and beam propagation factor
    EN 60825-1:2014/AC:2017-06 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
    ISO 13694:2015 Optics and photonics Lasers and laser-related equipment Test methods for laser beam power (energy) density distribution
    IEC 60825-4:2006+AMD1:2008+AMD2:2011 CSV Safety of laser products - Part 4: Laser guards
    ISO 15616-2:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 2: Measurement of static and dynamic accuracy
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
    ISO 11670:2003 Lasers and laser-related equipment — Test methods for laser beam parameters — Beam positional stability
    EN ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
    EN ISO 11554:2017 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017)
    EN ISO 11146 : 1999 LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM PARAMETERS - BEAM WIDTHS, DIVERGENCE ANGLE AND BEAM PROPAGATION FACTOR
    ISO 230-2:2014 Test code for machine tools Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
    EN ISO 11145:2016 Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2016)
    EN ISO 11670:2003/AC:2004 LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM PARAMETERS - BEAM POSITIONAL STABILITY (ISO 11670:2003/Cor.1:2004)
    ISO 11553:1996 Safety of machinery — Laser processing machines — Safety requirements
    EN 60825-2:2004/A2:2010 SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS)
    ISO 11145:2016 Optics and photonics Lasers and laser-related equipment Vocabulary and symbols
    ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 3: Calibration of instruments for measurement of gas flow and pressure
    EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective