EN ISO 17132:2007
Current
The latest, up-to-date edition.
Paints and varnishes - T-bend test (ISO 17132:2007)
01-10-2007
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
6 Sampling
7 Test panels
7.1 Substrate
7.2 Preparation and coating
7.3 Thickness of the coating
8 Procedure
8.1 Conditioning of the test panels
8.2 Test conditions
8.3 Bending
8.4 Evaluation
8.5 T-bend test as a pass/fail test
9 Supplementary information
10 Expression of results
11 Precision
11.1 General
11.2 Repeatability, r
11.3 Reproducibility, R
12 Test report
Annex A (informative) Correlation between the ISO rating system
and other systems
Bibliography
ISO 17132:2007 describes a method of evaluating the flexibility and adhesion of an organic coating on a metallic substrate by observing the cracking or loss of adhesion when a coated test panel is bent.The method can be used to confirm whether paints, varnishes or related products meet a given test requirement in a pass/fail test, or to determine the minimum bending diameter at which cracking does not occur.
Committee |
CEN/TC 139
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
UNI EN ISO 17132 : 2008 | Identical |
BS EN ISO 17132:2007 | Identical |
NBN EN ISO 17132 : 2007 | Identical |
ISO 17132:2007 | Identical |
NEN EN ISO 17132 : 2007 | Identical |
NS EN ISO 17132 : 1ED 2007 | Identical |
SN EN ISO 17132:2007 | Identical |
NF EN ISO 17132 : 2007 | Identical |
I.S. EN ISO 17132:2007 | Identical |
UNE-EN ISO 17132:2008 | Identical |
DIN EN ISO 17132:2008-01 | Identical |
PN EN ISO 17132 : 2009 | Identical |
I.S. EN 13523-7:2014 | COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST) |
DIN EN 13523-7:2014-08 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
BS EN 13523-7:2014 | Coil coated metals. Test methods Resistance to cracking on bending (T-bend test) |
EN 13523-7:2014 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
UNI EN 13523-7 : 2014 | COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST) |
ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
IEC 60454-2:2007 | Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test |
ISO 6272-2:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter |
ISO 2808:2007 | Paints and varnishes Determination of film thickness |
ISO 1520:2006 | Paints and varnishes Cupping test |
ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
ISO 6272-1:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
EN 13523-7:2014 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
ISO 6860:2006 | Paints and varnishes Bend test (conical mandrel) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.