EN ISO 22827-1:2005
Current
The latest, up-to-date edition.
Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly (ISO 22827-1:2005)
15-10-2005
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Environmental conditions and operating
conditions of acceptance tests
4.1 Installation environment
4.2 Power supply
4.3 Cooling system
4.4 Pumping light source
4.5 Shielding and assist gas
4.6 Operating instruction for users
5 Acceptance test
5.1 General
5.2 Check of parts
5.3 Acceptance tests for laser power and
optical system
5.4 Test for laser beam safety
5.5 Test of pressures and flow rates of
assist and shielding gases
6 Welding test
7 Records of test results
Annex A (informative) Example of a test report form
Annex B (informative) Optional parameters
Bibliography
ISO 22827-1:2005 specifies basic requirements and test methods for acceptance testing of high-power (average power more than 100 W), lamp-pumped or laser-diode-pumped Nd:YAG laser beam welding machines for seam welding with optical fibre delivery systems.ISO 22827-1:2005 applies to the beam generating system, the optical delivery system and the devices for shielding and assist gases.
| Committee |
CEN/TC 121
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN ISO 22827-1:2006-02 | Identical |
| ISO 22827-1:2005 | Identical |
| NEN EN ISO 22827-1 : 2005 | Identical |
| PN EN ISO 22827-1 : 2007 | Identical |
| SN EN ISO 22827-1 : 2005 | Identical |
| BS EN ISO 22827-1:2005 | Identical |
| NBN EN ISO 22827-1 : 2006 | Identical |
| UNE-EN ISO 22827-1:2006 | Identical |
| I.S. EN ISO 22827-1:2005 | Identical |
| UNI EN ISO 22827-1 : 2007 | Identical |
| NF EN ISO 22827-1 : 2006 | Identical |
| NS EN ISO 22827-1 : 1ED 2005 | Identical |
| BS EN 4678:2011 | Aerospace series. Weldments and brazements for aerospace structures. Joints of metallic materials by laser beam welding. Quality of weldments |
| DIN EN 1011-6:2006-03 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| I.S. EN 1011-6:2006 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| EN 1011-6:2005 | Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding |
| UNI EN 4678 : 2012 | AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS |
| BS EN 1011-6:2005 | Welding. Recommendations for welding of metallic materials Laser beam welding |
| EN 4678:2011 | Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments |
| 09/30197751 DC : 0 | BS EN 4678 - AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS |
| I.S. EN 4678:2011 | AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS |
| PREN 4678 : 200P1 | AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS |
| ISO 11554:2017 | Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics |
| ISO 15614-11:2002 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 11: Electron and laser beam welding |
| ISO 17662:2016 | Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| ISO 22827-2:2005 | Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 2: Moving mechanism |
| ISO 11145:2016 | Optics and photonics Lasers and laser-related equipment Vocabulary and symbols |
| ISO 15609-4:2009 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding |
| ISO 11553-1:2005 | Safety of machinery Laser processing machines Part 1: General safety requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.