EN ISO 6145-7:2010

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Set-up
6 Preparation of gas mixtures
7 Calculations
Annex A (informative) - Pre-mixed gases for preparation
        of mixtures of high dilution
Annex B (informative) - Practical hints
Annex C (informative) - Calculation of uncertainties
Bibliography

ISO 6145-7:2009 specifies a method for continuous production of calibration gas mixtures, containing two or more components, from pure gases or other gas mixtures by use of commercially available thermal mass-flow controllers. If this method is employed for the preparation of calibration gas mixtures, the optimum performance is as follows: the relative expanded uncertainty of measurement, U, obtained by multiplying the combined standard uncertainty by a coverage factor k = 2, is not greater than 2 %.If pre-mixed gases are used instead of pure gases, mole fractions below 10-6 can be obtained. The measurement of mass flow is not absolute and the flow controller requires independent calibration.The merits of the method are that a large quantity of the gas mixture can be prepared on a continuous basis and that multicomponent mixtures can be prepared as readily as binary mixtures if the appropriate number of thermal mass-flow controllers is utilized.