EN ISO 6506-1:2014

Current

Current The latest, up-to-date edition.

Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)

Available format(s):

Language(s):

Published date: 24-09-2014

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Principle
4 Symbols and abbreviated terms
5 Apparatus
6 Test piece
7 Procedure
8 Uncertainty of the results
9 Test report
Annex A (normative) - Procedure for periodic checking
        of the testing machine by the user
Annex B (normative) - Minimum thickness of the test
        piece in relation to the mean diameter of indentation
Annex C (informative) - Uncertainty of the measured
        hardness values
Bibliography

Abstract - (Show below) - (Hide below)

ISO 6506-1:2014 specifies the method for the Brinell hardness test for metallic materials. It is applicable to both fixed location and portable hardness testing machines.For some specific materials and/or products, particular International Standards exist (e.g. ISO 4498) and make reference to this International Standard.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 459/SC 1
Development Note	Supersedes EN 10003-1 (06/2004)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current
Supersedes	EN ISO 6506-1:1999

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
UNI EN ISO 6506-1:2015	Identical
SN EN ISO 6506-1:2014	Identical
NF EN ISO 6506-1 : 2014	Identical
UNI EN ISO 6506-1 : 2006	Identical
SS-EN ISO 6506-1:2014	Identical
PN EN ISO 6506-1 : 2014	Identical
BS EN ISO 6506-1:2014	Identical
I.S. EN ISO 6506-1:2014	Identical
ISO 6506-1:2014	Identical
NEN EN ISO 6506-1 : 2014	Identical
NBN EN ISO 6506-1 : 2014	Identical
UNE-EN ISO 6506-1:2015	Identical
NS EN ISO 6506-1 : 2014	Identical
DIN EN ISO 6506-1:2015-02	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

03/306636 DC : DRAFT APR 2003	EN 13674-3 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS
UNE-EN 14811:2007	Railway applications - Track - Special purpose rail - Grooved and associated construction
UNE-EN 10088-5:2010	Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
14/30303794 DC : 0	BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
I.S. EN 10208-2:2009	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
PREN 438-2 : DRAFT 2014	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
16/30258478 DC : 0	BS EN 13674-2 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
09/30200834 DC : 0	BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
12/30254917 DC : DRAFT JAN 2012	BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
13/30290101 DC : 0	BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
06/30136505 DC : 0	EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
PREN 598 : DRAFT 2017	COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS
PREN 1564 : DRAFT 2009	FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON
UNI EN 4700-006 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
DIN 17751:2002-09	TUBES OF WROUGHT NICKEL AND NICKEL ALLOYS - PROPERTIES
DIN EN 13674-4:2016-05 (Draft)	RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
06/30146724 DC : 0	EN 10277-1 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
DIN EN 1339:2003-08	CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS
I.S. EN 10349:2009	STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS
EN 10085:2001	Nitriding steels - Technical delivery conditions
UNI EN 13600 : 2013	COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES
14/30301152 DC : 0	BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
09/30185939 DC : 0	BS EN 12513 - FOUNDING - ABRASION RESISTANT CAST IRONS
DIN 3523:2001-04	Fittings for drinking water installations - Extensions
BS EN 16124:2011	Founding. Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
12/30258463 DC : 0	BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
11/30254168 DC : 0	BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
BS EN 4700-005:2010	Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock
08/30181473 DC : DRAFT JULY 2008	BS EN 545 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
09/30200840 DC : 0	BS EN 1564 - FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON
DIN EN 10349:2010-02	Steel castings - Austenitic manganese steel castings
PREN 14811 : DRAFT 2016	RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GRVED AND ASSOCIATED CONSTRUCTION
12/30265276 DC : 0	BS EN 13001-3-3 - CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
06/30143946 DC : 0	EN 485-1 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
PREN 12392 : DRAFT 2014	ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
BS EN 1562:2012	Founding. Malleable cast irons
BS EN 15594:2009	Railway applications. Track. Restoration of rails by electric arc welding
UNI EN 13601 : 2013	COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
UNI EN 13605 : 2013	COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES
BS EN 15566:2016	Railway applications. Railway rolling stock. Draw gear and screw coupling
DIN 7603:2001-05	Sealing rings
BS EN 10083-3 : 2006-08	STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
PREN 4700-005 : 200P2	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
DIN EN 13674-2:2016-05 (Draft)	RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
I.S. EN 14157:2017	NATURAL STONE TEST METHODS - DETERMINATION OF THE ABRASION RESISTANCE
I.S. EN 16771:2016	RAILWAY APPLICATIONS - INFRASTRUCTURE - ALUMINOTHERMIC WELDING OF GROOVED RAILS
I.S. CEN TS 15185:2006	FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION
UNE-EN 14688:2016	Sanitary appliances - Wash basins - Functional requirements and test methods
I.S. EN 1563:2011	FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
I.S. EN 16725:2016	RAILWAY APPLICATIONS - TRACK - RESTORATION AND REPAIR OF MANGANESE CROSSINGS
BS EN 14917 : 2009	METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
EN 14917:2009+A1:2012	Metal bellows expansion joints for pressure applications
17/30359541 DC : 0	BS EN 12797 - BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS
DIN EN 14811 E : 2010	RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
18/30365854 DC : 0	BS EN 1337-6 - STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
15/30322070 DC : 0	BS EN 1563 - FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
UNI EN 1563 : 2012	FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
I.S. EN 4700-007:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
NF EN 4700-007 : 2012	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
I.S. EN 10088-5:2009	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
EN 12167:2016	COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES
EN 545:2010	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
EN 12165:2016	COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK
DIN EN 13605:2013-09	Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
DIN EN 13262:2011-06	RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
DIN EN 1982:2016-01 (Draft)	COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS
DIN EN 13748-2:2005-03	Terrazzo tiles - Part 2: Terrazzo tiles for external use; German version EN 13748-2:2004
DIN EN 10208-1:2009-07	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
DIN EN 13604:2013-09	Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
DIN EN 14359 E : 2017	GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
BS EN 14525:2004	Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
BS EN 13600:2013	Copper and copper alloys. Seamless copper tubes for electrical purposes
BS EN 14200:2004	Railway applications. Suspension components. Parabolic springs, steel
EN 1706:2010	Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
BS EN 13835:2012	Founding. Austenitic cast irons
UNE-EN 10272:2016	Stainless steel bars for pressure purposes
BS EN 10088-2:2014	Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
UNE-EN 1559-1:2011	Founding - Technical conditions of delivery - Part 1: General
BS EN 754-1:2016	Aluminium and aluminium alloys. Cold drawn rod/bar and tube Technical conditions for inspection and delivery
UNE-EN 1706:2011	Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
BS EN 1338:2003	Concrete paving blocks. Requirements and test methods
BS EN 303-5:2012	Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking
UNE-EN 12513:2011	Founding - Abrasion resistant cast irons
BS EN 10272:2007	Stainless steel bars for pressure purposes
BS EN 1339:2003	Concrete paving flags. Requirements and test methods
BS EN 14616:2004	Thermal spraying. Recommendations for thermal spraying
BS EN 14730-1:2017	Railway applications. Track. Aluminothermic welding of rails Approval of welding processes
BS EN 12420:2014	Copper and copper alloys. Forgings
BS EN 1340:2003	Concrete kerb units. Requirements and test methods
BS EN 1559-1:2011	Founding. Technical conditions of delivery General
BS EN 14772:2005	Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
I.S. EN 10084:2008	CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
I.S. EN 13601:2013	COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
DIN EN 1562:2012-05	FOUNDING - MALLEABLE CAST IRONS
I.S. EN 459-2:2010	BUILDING LIME - PART 2: TEST METHODS
I.S. EN 10218-1:2012	STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS
EN 13230-3:2016	Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers
EN 10297-1:2003	Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 13001-3-3:2014	Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
EN 10277-1:2008	Bright steel products - Technical delivery conditions - Part 1: General
EN 10331:2003	Magnetic materials - Specification for sintered soft magnetic materials
EN 10088-2:2014	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
CEN/TS 15718:2011	Railway applications - Wheelsets and bogies - Product requirements for cast wheels
EN 10088-3:2014	Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
CEN/TS 15185 : 2005	FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION
DIN EN 10218-1:2012-03	STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS
EN 10088-4:2009	Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
DIN EN 14811:2019-06	Railway applications - Track - Special purpose rail - Grooved rails and associated construction profiles; German version EN 14811:2019
DIN EN 14616:2005-02	THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING
EN 10269:2013	Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
DIN EN 13001-3-3:2015-02	CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
EN 10208-1:2009	Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A
EN 10272:2016	Stainless steel bars for pressure purposes
EN 13322-2:2003/A1:2006	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 2: STAINLESS STEEL
EN 12392:2016	Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
EN 1337-4:2004/AC:2007	STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
EN 1337-6:2004	Structural bearings - Part 6: Rocker bearings
EN 10218-1:2012	Steel wire and wire products - General - Part 1: Test methods
EN 12513:2011	Founding - Abrasion resistant cast irons
EN 1338:2003/AC:2006	CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
EN 10083-2:2006	Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
EN 15185:2011	Furniture - Assessment of the surface resistance to abrasion
ÖNORM EN 14525:2023 01 01	Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement
PREN 13605 : DRAFT 2011	COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES
EN 13600:2013	Copper and copper alloys - Seamless copper tubes for electrical purposes
UNI EN 16482 : 2014	FOUNDING - CONTINUOUS CAST IRON BARS
BS EN 16451:2015	Railway applications. Braking. Brake pad holder
NF EN 15594 : 2009	RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING
PREN 13601 : DRAFT 2011	COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
DIN EN 14917:2012-06	Metal bellows expansion joints for pressure applications (includes Amendment A1:2012)
09/30202316 DC : 0	BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
BS EN 4700-006:2010	Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings
UNE-EN 61439-5:2015	Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks
14/30285793 DC : 0	BS EN 16771 - RAILWAY APPLICATIONS - INFRASTRUCTURE - ALUMINOTHERMIC WELDING OF GROOVED RAILS
05/30131069 DC : DRAFT MAR 2005	EN 598:2005 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
10/30217328 DC : 0	BS EN 1340 - CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS
DIN EN 16273:2015-03	Railway applications - Track - Forged rail transitions
DIN EN 10253-2:2008-09	Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
DIN EN 10088-4:2010-01	Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
BS EN 10349:2009	Steel castings. Austenitic manganese steel castings
DIN EN 16451:2015-09	RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
UNE-EN 13001-3-3:2015	Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
17/30357386 DC : 0	BS EN 13001-3-5 AMD 1 - CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE OF FORGED AND CAST HOOKS
BS EN 13001-3-3:2014	Cranes. General design Limit states and proof of competence of wheel/rail contacts
UNE-EN 438-2:2016	High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties
10/30228108 DC : 0	BS EN 4400-9 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOYS - TECHNICAL SPECIFICATION - PART 9: PRE-PRODUCTION AND PRODUCTION CASTINGS
08/30182454 DC : DRAFT JULY 2008	BS EN 10208-1 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
DIN EN 16482:2014-09	FOUNDING - CONTINUOUS CAST IRON BARS
PREN 12513 : DRAFT 2009	FOUNDING - ABRASION RESISTANT CAST IRONS
11/30253751 DC : 0	BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
DIN EN 15594:2009-08	RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING
BS EN 14157:2017	Natural stone test methods. Determination of the abrasion resistance
BS EN 14811 : 2006	RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
EN 4700-002:2016	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section
12/30261889 DC : 0	BS EN 12420 - COPPER AND COPPER ALLOYS - FORGINGS
S.R. CEN/TS 15718:2011	RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS
DD CEN/TS 15185:2005	Furniture. Assessment of the surface resistance to abrasion
10/30216654 DC : 0	BS EN 12842 - DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
PREN 13674-1 : DRAFT 2009	RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
PREN 10088-2 : DRAFT 2011	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
NF EN 4700-005 : 2012	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
09/30185942 DC : 0	BS EN 13835 - FOUNDING - AUSTENITIC CAST IRONS
PREN 15185 : DRAFT 2009	FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION
UNI EN 15185 : 2011	FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION
PREN 13600 : DRAFT 2011	COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES
11/30239433 DC : 0	BS EN 12449 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
DD CEN/TS 15718:2011	Railway applications. Wheelsets and bogies. Product requirements for cast wheels
06/30136240 DC : 0	EN 12020-1 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
05/30132585 DC : DRAFT APR 2005	EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
BS EN 60439-5:2006	Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks
07/30173607 DC : 0	BS EN 15718 - RAILWAY APPLICATIONS - MONOBLOCK WHEEL PRODUCTS - CAST WHEELS
PREN 303-5 : DRAFT 2010	CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
UNE-EN 16668:2016	Industrial valves - Requirements and testing for metallic valves as pressure accessories
I.S. EN 754-1:2016	ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
PREN 1340 : DRAFT 2010	CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS
I.S. EN 12449:2016	COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
I.S. EN 16124:2011	FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS
DIN EN 13310:2015-09	KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
NF EN 14811 : 2006 + A1 2010	RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
PREN 10272 : DRAFT 2013	STAINLESS STEEL BARS FOR PRESSURE PURPOSES
EN 10253-2:2007	Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
EN 1340:2003/AC:2006	CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS
PREN 12797 : DRAFT 2017	BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS
I.S. EN 61439-5:2015	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
BS EN 12449:2016	Copper and copper alloys. Seamless, round tubes for general purposes
EN 1563:2011	Founding - Spheroidal graphite cast irons
10/30217325 DC : 0	BS EN 1339 - CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS
UNE-EN 16273:2015	Railway applications - Track - Forged rail transitions
ONORM EN 754-1 : 2008	ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
PREN 1337-6 : DRAFT 2018	STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
UNI EN 16124 : 2012	FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS
UNE-EN 10088-4:2010	Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
UNI EN 4700-007 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
I.S. EN 4700-006:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
NF EN 4700-002 : 2012	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
EN 10083-1:2006	Steels for quenching and tempering - Part 1: General technical delivery conditions
I.S. EN 14811:2006	RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
EN 12164:2016	Copper and copper alloys - Rod for free machining purposes
I.S. EN 1562:2012	FOUNDING - MALLEABLE CAST IRONS
I.S. EN 10253-2:2007	BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
EN 1982:2017	Copper and copper alloys - Ingots and castings
NF EN 13262 : 2004 + A2 2011	RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
EN 12168:2016	Copper and copper alloys - Hollow rod for free machining purposes
NF EN 13674-2 : 2006 + A1 2010	RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
DIN EN 14730-1:2014-05 (Draft)	RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES
DIN EN 755-1:2016-10	ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 10297-1 E : 2003	SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
DIN EN 12842:2012-11	Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
DIN EN 1559-1:2011-05	Founding - Technical conditions of delivery - Part 1: General
DIN EN 12167:2015-12 (Draft)	COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES
DIN EN 14772 E : 2005	FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE EN 1514 AND EN 12560 SERIES OF STANDARDS
DIN EN 598:2009-10	Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009)
DIN EN 12168:2015-12 (Draft)	COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES
DIN EN 303-5:2012-10	Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
DIN EN 10269:2014-02	STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
DIN EN 12165:2015-12 (Draft)	COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK
DIN EN 1337-6:2004-08	Structural bearings - Part 6: Rocker bearings
DIN EN 14354:2005-03	WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
DIN EN 10297-1:2003-06	SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
DIN EN 14688 E : 2015	SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
DIN EN 12163:2015-12 (Draft)	COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES
DIN EN 12164:2015-12 (Draft)	COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES
BS EN 598 : 2007	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
BS EN 12163:2011	Copper and copper alloys. Rod for general purposes
UNE-EN 545:2011	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
BS EN 13748-1 : 2004	TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL US
BS EN 438-2 : 2016	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
BS EN 13322-2:2003	Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction Stainless steel
DIN EN 1559-2:2014-12	FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
I.S. EN 485-1:2016	ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
I.S. EN 13600:2013	COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES
I.S. EN 13674-3:2006	RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS
DIN EN 12513:2011-05	Founding - Abrasion resistant cast irons
I.S. EN 14772:2005	FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560
I.S. EN 598:2007	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
I.S. EN 969:2009	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS
I.S. EN 12842:2012	DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
I.S. EN 570:2007	ALUMINIUM AND ALUMINIUM ALLOYS - IMPACT EXTRUSION SLUGS OBTAINED FROM WROUGHT PRODUCTS - SPECIFICATIONS
DIN EN 10208-2:2009-07	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
EN 14772:2005	Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
I.S. EN 1982:2017	COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS
DIN EN 13674-1:2011-04	RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
DIN EN 13674-1:2017-07	RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
I.S. EN 10088-2:2014	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN 12167:2016	COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES
I.S. EN 13835:2012	FOUNDING - AUSTENITIC CAST IRONS
DIN EN 12420:1999-03	COPPER AND COPPER ALLOYS - FORGINGS
I.S. EN 13605:2013	COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES
DIN EN 10208-1:1998-02	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
DIN EN 10088-2:2014-12	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN 12168:2016	COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES
I.S. EN 14354:2017	WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
I.S. EN 1559-1:2011	FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
I.S. EN 13230-3:2016	RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS
I.S. EN 10269:2013	STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
I.S. EN 12020-1:2008	ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
I.S. EN 1559-2:2014	FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
I.S. EN 10083-2:2006	STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS
I.S. EN 12392:2016	ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
I.S. EN 10272:2016&LC:2016	STAINLESS STEEL BARS FOR PRESSURE PURPOSES
I.S. EN 1561:2011	FOUNDING - GREY CAST IRONS
I.S. EN 13604:2013	COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER
I.S. EN 12513:2011	FOUNDING - ABRASION RESISTANT CAST IRONS
I.S. EN 545:2010	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
I.S. EN 10088-3:2014	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN 14730-1:2017	RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES
I.S. EN 303-1:2017	HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
I.S. EN 303-5:2012	HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
I.S. EN 14394:2006	HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
DIN EN 10088-3:2014-12	Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
DIN EN 10083-3:2007-01	STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
I.S. EN 12165:2016	COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK
I.S. EN 13674-1:2011	RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
I.S. EN 12164:2016	COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES
I.S. EN 10277-1:2008	BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
DIN EN 10277-1:2008-06	BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
I.S. EN 1564:2011	FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS
I.S. EN 12420:2014	COPPER AND COPPER ALLOYS - FORGINGS
I.S. EN 14359:2017	GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
I.S. EN 755-1:2016	ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
I.S. EN 12163:2016	COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES
VDI 3405-2-1 : 2015 COR 2017	ADDITIVE MANUFACTURING PROCESSES, RAPID MANUFACTURING - LASER BEAM MELTING OF METALLIC PARTS; MATERIAL DATA SHEET ALUMINIUM ALLOY ALSI10MG
VDI/VDE 2616 Blatt 1:2012-08	Hardness testing of metallic materials
NF EN 13835 : 2012	FOUNDING - AUSTENITIC CAST IRONS
VDI 3405 Blatt 2:2013-08	Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing
UNE-EN 16482:2014	Founding - Continuous cast iron bars
DIN EN 1563:2015-07 (Draft)	FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
03/306637 DC : DRAFT APR 2003	EN 13674-4 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: FLAT BOTTOM SYMMETRICAL RAILWAY RAILS FROM 27 KG/M TO 46 KG/M
BS EN 16079:2011	Founding. Compacted (vermicular) graphite cast irons
PREN 12842 : DRAFT 2010	DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
I.S. EN 14688:2015	SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
BS EN 4700-004:2010	Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire
06/30156796 DC : 0	BS EN 15594 - RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING
06/30136187 DC : 0	EN 755-1 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
03/114555 DC : DRAFT SEP 2003	EN 14772 - FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560
UNI EN 4700-005 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
UNI EN 10088-5 : 2009	Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction
02/710115 DC : DRAFT AUG 2002	PREN 14525 - DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT
BS EN 15185:2011	Furniture. Assessment of the surface resistance to abrasion
BS EN 4700-002:2016	Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section
DIN EN 13001-3-3 E : 2015	CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
I.S. EN 10083-1:2006	STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNI EN 4700-004 : 2011	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire
11/30254171 DC : 0	BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN 15594 E : 2009	RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING
PREN 754-1 : DRAFT 2015	ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
UNI EN 303-5 : 2012	HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
PREN 1562 : DRAFT 2009	FOUNDING - MALLEABLE CAST IRONS
13/30288572 DC : 0	BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES
12/30267860 DC : 0	BS EN 16482 - FOUNDING - CONTINUOUS CAST IRON BARS
UNE-EN 15185:2011	Furniture - Assessment of the surface resistance to abrasion
15/30324460 DC : 0	BS EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
01/715451 DC : DRAFT NOV 2001	PREN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES
NF EN 4700-006 : 2012	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
10/30228886 DC : 0	BS EN 303-5 - CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
09/30185992 DC : 0	BS EN 13674-1 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
BS EN 13674-2 : 2006	RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
08/30187526 DC : 0	BS EN 14121 - ALUMINIUM AND ALUMINIUM ALLOYS - ALUMINIUM SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS
BS EN 16771:2016	Railway applications. Infrastructure. Aluminothermic welding of grooved rails
03/306635 DC : DRAFT APR 2003	EN 13674-2 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
10/30217322 DC : 0	BS EN 1338 - CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
05/30132603 DC : DRAFT APR 2005	EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
05/30126202 DC : 0	EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
BS EN 1563:2011	Founding. Spheroidal graphite cast irons
I.S. EN 10085:2001	NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS
11/30240456 DC : 0	BS EN 13601 - COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
DIN EN 14917 E : 2012	METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
EN 12449:2016	Copper and copper alloys - Seamless, round tubes for general purposes
I.S. EN 16273:2014	RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS
PREN 14688 : DRAFT 2014	SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
EN 438-2:2016	High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
NF EN 10349 : 2009	STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS
UNE-EN 13674-4:2007	Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m
NF EN 15185 : 2011	FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION
DIN EN 14688:2015-10	SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
EN 14157:2017	Natural stone test methods - Determination of the abrasion resistance
I.S. EN 4700-001:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
UNI EN 4700-003 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
NF EN 4700-003 : 2012	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
I.S. EN 438-2:2016	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
I.S. EN 60439-5:2006	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
UNI EN 13674-4 : 2010	RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
PREN 14359 : DRAFT 2014	GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
EN 1562:2012	Founding - Malleable cast irons
17/30347070 DC : 0	BS EN 10340-2 - STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS
PREN 15566 : DRAFT 2013	RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
PREN 12420 : DRAFT 2012	COPPER AND COPPER ALLOYS - FORGINGS
BS EN 16668 : 2016	INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
EN 13674-4:2006+A1:2009	RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
PREN 1559-2 : DRAFT 2012	FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
DIN EN 1564:2012-01	Founding - Ausferritic spheroidal graphite cast irons
DIN EN 1706:2013-12	ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
I.S. EN 13329:2016	LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 14359:2017	Gas-loaded accumulators for fluid power applications
EN 12420:2014	Copper and copper alloys - Forgings
I.S. EN 15566:2016	RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
UNE-EN 10088-2:2015	Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
I.S. EN 14917:2009	METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
EN 1561:2011	Founding - Grey cast irons
EN 12163:2016	Copper and copper alloys - Rod for general purposes
DIN EN 12392:2016-08	Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
DIN EN 10083-1:2006-10	STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 754-1:2016-10	ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 13748-1:2005-08	TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL USE
DIN EN 12420:2014-09	COPPER AND COPPER ALLOYS - FORGINGS
UNE-EN 10208-1:2011	Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A
DIN EN 1337-4 E : 2004	STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
DIN EN 14525 E : 2005	DUCTILE IRON WIDE TOLERANCE COULINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U, PE, FIBRE-CEMENT
DIN EN 10089:2003-04	Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002
DIN EN 14394 E : 2008	HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
DIN EN 14394:2008-12	HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
DIN EN 14359:2011-04	GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
UNE-EN 14730-1:2018	Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes
BS EN 13674-1 : 2011	RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
BS EN 459-2:2010	Building lime Test methods
BS EN 545:2010	Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
BS EN 10208-2:2009	Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B
BS EN 1964-2:2001	Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless steel with an R_m value of 1 100 MPa and above
BS EN 969:2009	Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods
UNE-EN 459-2:2011	Building lime - Part 2: Test methods
UNE-EN 755-1:2016	Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
BS EN 12168:1998	Copper and copper alloys. Hollow rod for free machining purposes
UNE-EN 12842:2013	Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
UNE-EN 10088-3:2015	Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
DIN EN 1337-4:2004-08	Structural bearings - Part 4: Roller bearings
UNE-EN 1982:2018	Copper and copper alloys - Ingots and castings
BS EN 1706:2010	Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties
UNE-EN 1564:2012	Founding - Ausferritic spheroidal graphite cast irons
UNI EN 13262 : 2011	RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
UNE-EN 12449:2016	Copper and copper alloys - Seamless, round tubes for general purposes
UNI EN 1706 : 2010	ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
I.S. EN 13262:2004	RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
EN 13262:2004+A2:2011	Railway applications - Wheelsets and bogies - Wheels - Product requirements
EN 485-1:2016	Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
EN 14354:2017	Wood-based panels - Wood veneer floor coverings
UNI EN 10088-3 : 2014	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNI EN 10208-2 : 2009	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
UNI EN 10269 : 2013	Nickel steels and alloys for fasteners with specific properties at high and / or low temperatures
UNI EN 12513 : 2011	Founding - Abrasion resistant cast irons
UNI EN 13835 : 2012	FOUNDING - AUSTENITIC CAST IRONS
EN 1559-2:2014	Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
UNI EN 10083-1 : 2006	STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNI EN 14394 : 2008	HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C
UNI EN 1559-2 : 2014	FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
ONORM EN 12020-1 : 2008	ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
UNI EN 14525 : 2005	DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT
UNI EN 969 : 2009	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS
UNI EN 10083-3 : 2006	STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
UNI EN 12842 : 2012	DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
UNI EN 12420 : 2014	COPPER AND COPPER ALLOYS - FORGINGS
UNI EN 1561 : 2011	FOUNDING - GREY CAST IRONS
UNI EN 10218-1 : 2012	STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS
UNI EN 10208-1 : 2009	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
UNI EN 1559-1 : 2011	FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
UNI EN 1564 : 2011	FOUNDING - AUSFERRITIC SPHEROIDAL GRAFITE CAST IRONS
UNI EN 13674-3 : 2010	RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS
I.S. EN 14525:2005	DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT
UNI EN 1340 : 2004	CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS
UNI EN 545 : 2010	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
UNI EN 10088-2:2014	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNI EN 10084 : 2008	CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
UNI EN 1338 : 2004	CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
UNI EN 14121 : 2009	ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS
UNI EN 598 : 2009	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
UNI EN 755-1 : 2008	ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
UNI EN 13604 : 2013	COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER
UNI EN 1339 : 2005	CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS
UNE-EN 10349:2011	Steel castings - Austenitic manganese steel castings
EN 303-5:2012	Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
UNI EN 10349 : 2009	STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS
UNI CEN/TS 15718 : 2011	RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS
UNI EN 15594 : 2009	RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING
DIN EN 15185:2011-07	Furniture - Assessment of the surface resistance to abrasion
DIN EN 16124:2012-02	Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
BS EN 16273:2014	Railway applications. Track. Forged rail transitions
I.S. EN 13310:2015	KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
03/301625 DC : DRAFT JAN 2003	BS EN ISO 10424-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 1: SPECIFICATION FOR ROTARY DRILLING EQUIPMENT
11/30240465 DC : 0	BS EN 13604 - COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER
BS EN 16725:2016	Railway applications. Track. Restoration and repair of manganese crossings
13/30287824 DC : 0	BS EN 16668 - INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
09/30207453 DC : 0	BS EN 15185 - FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION
11/30240468 DC : 0	BS EN 13605 - COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES
14/30297210 DC : 0	BS EN 16273 - RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS
BS EN 61439-5:2015	Low-voltage switchgear and controlgear assemblies Assemblies for power distribution in public networks
UNI EN 16079 : 2012	FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS
DIN EN 12449:2015-11 (Draft)	COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
14/30311457 DC : 0	BS EN 13310 - KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
PREN 13674-4 : DRAFT 2016	RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
12/30266615 DC : 0	BS EN 1559-2 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
BS EN 13329 : 2016	LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
BS EN 4700-003:2010	Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube
PREN 14121 : DRAFT 2008	ALUMINIUM AND ALUMINIUM ALLOYS - ALUMINIUM SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS
PREN 14157 : DRAFT 2016	NATURAL STONE TEST METHODS - DETERMINATION OF THE ABRASION RESISTANCE
14/30274238 DC : 0	BS EN 14359 - GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
14/30311463 DC : 0	BS EN 14688 - SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
13/30241415 DC : 0	BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
11/30240453 DC : 0	BS EN 13600 - COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES
DIN EN 10088-5:2009-07	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
PREN 13604 : DRAFT 2011	COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER
11/30253929 DC : 0	BS EN 4820 - AEROSPACE SERIES - COPPER AND COPPER ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION
UNI EN 14917 : 2012	METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
DIN EN 16079:2012-02	Founding - Compacted (vermicular) graphite cast irons; German version EN 16079:2011
07/30166426 DC : 0	BS EN 10349 - STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS
BS EN 16482:2014	Founding. Continuous cast iron bars
NF EN 4700-001 : 2012	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
07/30166067 DC : 0	BS EN 13230-3 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS
NF EN 4700-004 : 2012	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE
UNI EN 13674-2 : 2010	RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
EN 14688:2015	Sanitary appliances - Wash basins - Functional requirements and test methods
EN 13310:2015	Kitchen sinks - Functional requirements and test methods
BS EN 10088-4:2009	Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
PREN 13230-3 : DRAFT 2014	RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS
DIN EN 14811:2016-08 (Draft)	RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
I.S. EN 15185:2011	FLUESSIGGAS-GERAETE UND AUSRUESTUNGSTEILE - KENNZEICHNUNG VON FLASCHEN UND FAESSERN
NF EN 16124 : 2011	FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS
BS EN 13310 : 2015	KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
PREN 10269 : DRAFT 2011	STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
KTA 3211.1 : 2015	PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
NF EN 13674-4 : 2006 + A1 2010	RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
UNE-EN 1562:2012	Founding - Malleable cast irons
UNI EN 14811 : 2010	RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
PREN 13674-2 : DRAFT 2016	RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
PREN 1339 : DRAFT 2010	CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS
UNI EN 4700-001 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
ASTM F 3122 : 2014	Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes
PREN 12449 : DRAFT 2011	COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
UNE-EN 16124:2012	Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
UNI EN 459-2 : 2010	BUILDING LIME - PART 2: TEST METHODS
EN 14811:2006+A1:2009	RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
DIN EN 438-2:2016-06	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
PREN 10340-2 : DRAFT 2017	STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS
EN 754-1:2016	Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery
EN 13329:2016+A1:2017	Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
PREN 1338 : DRAFT 2010	CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
I.S. EN 13674-4:2006	RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
I.S. EN 13674-2:2006	RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
I.S. EN 4700-005:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
DIN EN 485-1:2016-10	ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 14653-2:2005-07	MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 2: ASSESSMENT BY CALCULATION OR TEST
UNE-EN 10208-2:2011	Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
DIN EN 969:2009-07	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS
DIN EN 459-2:2010-12	Building lime - Part 2: Test methods
DIN EN 10084:2008-06	CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
DIN EN 10272:2016-10	STAINLESS STEEL BARS FOR PRESSURE PURPOSES
DIN EN 10085:2001-07	Nitriding steels - Technical delivery conditions; English version of DIN EN 10085
BS EN 12811-3:2002	Temporary works equipment Load testing
BS EN 1564:2011	Founding. Ausferritic spheroidal graphite cast irons
BS EN 13605:2013	Copper and copper alloys. Copper profiles and profiled wire for electrical purposes
BS EN 12392:2016	Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment
BS EN 14354:2017	Wood-based panels. Wood veneer floor coverings
BS EN 12165:2011	Copper and copper alloys. Wrought and unwrought forging stock
BS EN 1559-2:2014	Founding. Technical conditions of delivery Additional requirements for steel castings
BS EN 14394 : 2005	HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
BS EN 1982:2017	Copper and copper alloys. Ingots and castings
BS EN 12513:2011	Founding. Abrasion resistant cast irons
BS EN 10084 : 2008-06	CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
BS EN 755-1:2016	Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Technical conditions for inspection and delivery
BS EN 10331:2003	Magnetic materials. Specification for sintered soft magnetic materials
BS EN 13262 : 2004	RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
BS EN 485-1 : 2008	ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
UNE-EN 13601:2014	Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
BS EN 1561:2011	Founding. Grey cast irons
BS EN 10083-2:2006	Steels for quenching and tempering Technical delivery conditions for non alloy steels
BS EN 13674-3 : 2006	RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS
BS EN 14653-2:2005	Manually operated hydraulic shoring systems for groundwork support Assessment by calculation or test
UNE-EN 754-1:2016	Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery
BS EN 1337-6:2004	Structural bearings Rocker bearings
BS EN 10218-1:2012	Steel wire and wire products. General Test methods
UNE-EN 13230-3:2016	Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers
BS EN 10083-1:2006	Steels for quenching and tempering General technical delivery conditions
BS EN 13748-2:2004	Terrazzo tiles Terrazzo tiles for external use
BS EN 10088-3:2014	Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
UNE-EN 10269:2014	Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
BS EN 12167:2011	Copper and copper alloys. Profiles and bars for general purposes
UNE-EN 13835:2012	Founding - Austenitic cast irons
BS EN 13230-3:2016	Railway applications. Track. Concrete sleepers and bearers Twin-block reinforced sleepers
UNE-EN 13600:2014	Copper and copper alloys - Seamless copper tubes for electrical purposes
I.S. EN 1706:2010	ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
UNE-EN 12420:2015	Copper and copper alloys - Forgings
UNE-EN 13329:2016	Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
BS EN 13601:2013	Copper and copper alloys. Copper rod, bar and wire for general electrical purposes
BS EN 14359:2017	Gas-loaded accumulators for fluid power applications
UNE-EN 14354:2017	Wood-based panels - Wood veneer floor coverings
UNE-EN 13262:2005	Railway applications - Wheelsets and bogies - Wheels - Product requirement.
BS EN 12164:2011	Copper and copper alloys. Rod for free machining purposes
BS EN 12020-1:2008	Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Technical conditions for inspection and delivery
BS EN 13604:2013	Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper
UNE-EN 10218-1:2012	Steel wire and wire products - General - Part 1: Test methods
BS EN 14688 : 2015	SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
BS EN 10085 : 2001-05	NITRIDING STEEL - TECHNICAL DELIVERY CONDITIONS
UNE-EN 485-1:2017	Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
DIN EN 13835:2012-04	FOUNDING - AUSTENITIC CAST IRONS
UNI EN 12020-1 : 2008	ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
EN 755-1:2016	Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
EN 15594:2009	Railway applications - Track - Restoration of rails by electric arc welding
EN 14653-2:2005	Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test
EN 14359:2017	Gas-loaded accumulators for fluid power applications
EN 13835:2012	Founding - Austenitic cast irons
EN 14394:2005+A1:2008	Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
EN ISO 10692-1:2001	Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 1: Outlet connections (ISO 10692-1:2001)
EN 14616:2004	Thermal spraying - Recommendations for thermal spraying
EN 4700-005:2010	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock
EN 16668:2016+A1:2018	Industrial valves - Requirements and testing for metallic valves as pressure accessories
EN 12020-1:2008	Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery
EN 13748-2:2004	Terrazzo tiles - Part 2: Terrazzo tiles for external use
EN 969:2009	Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
EN 1564:2011	Founding - Ausferritic spheroidal graphite cast irons
EN 16451:2015	Railway applications - Braking - Brake pad holder
EN 13674-3:2006+A1:2010	Railway applications - Track - Rail - Part 3: Check rails
EN 4700-003:2010	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube
EN 13604:2013	Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
UNI EN 10277-1 : 2008	BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
EN 16124:2011	Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
EN 13748-1:2004/A1:2005	TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL USE
EN 14525:2004	Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement
EN 1964-2 : 2001	TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0,5 LITRE UP TO AND INCLUDING 150 LITRES - PART 2: CYLINDERS MADE OF SEAMLESS STEEL WITH AN R[M] VALUE OF 1 100 MPA AND ABOVE
EN 4700-007:2010	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock
EN 14121:2009	Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications
EN 570:2007	Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification
EN 14200:2004	Railway applications - Suspension components - Parabolic springs, steel
EN 16725:2016	Railway applications - Track - Restoration and repair of manganese crossings
EN 1559-1:2011	Founding - Technical conditions of delivery - Part 1: General
EN 13674-1:2011+A1:2017	Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above
EN 16482:2014	Founding - Continuous cast iron bars
EN 12842:2012	Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
EN 598:2007+A1:2009	Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
EN 13674-2:2006+A1:2010	Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above
EN 303-1:2017	Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
EN 15566:2016	Railway applications - Railway rolling stock - Draw gear and screw coupling
EN 16079:2011	Founding - Compacted (vermicular) graphite cast irons
EN 14730-1:2017	Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes
EN 4700-004:2010	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire
EN 4700-001:2010	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip
EN 4700-006:2010	Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings
EN 16273:2014	Railway applications - Track - Forged rail transitions
DIN EN 303-1:2016-07 (Draft)	HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
PREN 10253-2 : DRAFT 2017	BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
BS EN 4700-001:2010	Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip
BS EN 10253-2:2007	Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements
DIN 17750:2002-09	Wrought nickel and nickel alloys sheet, plate and strip - Requirements and testing
09/30187760 DC : DRAFT JULY 2009	BS EN 1562 - FOUNDING - MALLEABLE CAST IRONS
I.S. EN 10208-1:2009	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
UNE-EN 15566:2017	Railway applications - Railway rolling stock - Draw gear and screw coupling
UNE-EN 16725:2017	Railway applications - Track - Restoration and repair of manganese crossings
03/317632 DC : DRAFT OCT 2003	BS EN 14730-1 - RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES
14/30292479 DC : 0	BS EN 13230-3 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS
PREN 1563 : DRAFT 2015	FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
UNE-EN 16079:2012	Founding - Compacted (vermicular) graphite cast irons
I.S. EN 4700-003:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
PREN 10088-3 : DRAFT 2011	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNE-EN 1563:2012	Founding - Spheroidal graphite cast irons
UNI EN 1562 : 2012	FOUNDING - MALLEABLE CAST IRONS
BS EN 10088-5:2009	Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
14/30258527 DC : 0	BS EN 16725 - RAILWAY APPLICATIONS - TRACK - RESTORATION AND REPAIR OF MANGANESE CROSSINGS
03/311760 DC : DRAFT JULY 2003	ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT
DIN EN 1338:2003-08	CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
BS EN 4700-007:2010	Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock
10/30227086 DC : DRAFT JUNE 2010	BS EN 16124 - FOUNDING - LOW ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRON FOR ELEVATED TEMPERATURE APPLICATIONS
01/715452 DC : DRAFT NOV 2001	PREN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES
DIN EN 16451 E : 2015	RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
DIN EN 1340:2003-08	CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS
16/30344411 DC : 0	BS EN 14157 - NATURAL STONE TEST METHODS - DETERMINATION OF THE ABRASION RESISTANCE
EN 13605:2013	Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
08/30182457 DC : DRAFT JULY 2008	BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
07/30168419 DC : 0	BS EN 1982 - COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS
EN 13601:2013	Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
16/30258515 DC : 0	BS EN 13674-4 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
05/30132598 DC : DRAFT APR 2005	EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS
I.S. EN 4700-002:2016	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
I.S. EN 13001-3-3:2014	CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
DIN EN 16482:2014-09	FOUNDING - CONTINUOUS CAST IRON BARS
EN 459-2:2010	Building lime - Part 2: Test methods
UNE-EN 15594:2010	Railway applications - Track - Restoration of rails by electric arc welding
PREN 4700-007 : 200P2	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
PREN 4700-001 : 200P2	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
PREN 4700-002 : 200P3	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
I.S. EN 16451:2015	RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
I.S. EN 16482:2014	FOUNDING - CONTINUOUS CAST IRON BARS
I.S. EN 15594:2009	RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING
UNE-EN 14653-2:2012	Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test
PREN 1559-1 : DRAFT 2009	FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
I.S. EN 16668:2016	INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
I.S. EN 4700-004:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE
16/30258472 DC : 0	BS EN 14811 - RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
17/30353548 DC : 0	BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS
DIN EN 14811 E : 2019	Railway applications - Track - Special purpose rail - Grooved rails and associated construction profiles; German version EN 14811:2019
UNI EN 10088-4 : 2009	STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
17/30362692 DC : 0	BS EN 598 - COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS
NF EN 16079 : 2012	FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS
I.S. EN 16079:2011	FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS
UNE-EN 14917:2011	Metal bellows expansion joints for pressure applications
BS EN 13674-4 : 2006	RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
DIN EN 1561:2012-01	Founding - Grey cast irons; German version EN 1561:2011
EN 10083-3:2006/AC:2008	STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
I.S. EN 10088-4:2009	STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
NF EN 1706 : 2010	ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
I.S. EN 10083-3:2006	STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
UNE-EN 13310:2016	Kitchen sinks - Functional requirements and test methods
EN ISO 13533:2001/AC:2006	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT
DIN EN 13674-3:2010-12	Railway applications - Track - Rail - Part 3: Check rails (includes Amendment A1:2010)
DIN EN 13601:2013-09	Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
DIN EN 12020-1:2008-06	Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery
DIN EN 14354 E : 2017	WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
DIN EN 10083-1 E : 2006	STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 13600:2013-09	Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2013
DIN EN 1337-6 E : 2004	STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
BS EN 10269:2013	Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
BS EN 10297-1:2003	Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes
BS EN 10208-1:2009	Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class A
UNE-EN 1561:2012	Founding - Grey cast irons
BS EN 1337-4:2004	Structural bearings Roller bearings
BS EN 12842:2012	Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods
BS EN ISO 13533:2002	Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment
UNE-EN 303-5:2013	Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
BS EN 14121:2009	Aluminium and aluminium alloys. Sheet, strip and plate for electrotechnical applications
BS EN 570:2007	Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specification
BS EN 10277-1:2008	Bright steel products. Technical delivery conditions General
BS EN 303-1:2017	Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking
EN 1339:2003/AC:2006	CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS
DIN EN 14772:2005-04	Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
EN 10084:2008	Case hardening steels - Technical delivery conditions
DIN EN 14525:2005-02	Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
EN 60439-5:2006	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
EN 61439-5:2015/AC:2015	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS (IEC 61439-5:2014)
EN 12811-3:2002	Temporary works equipment - Part 3: Load testing
EN 10088-5:2009	Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
EN 10208-2:2009	Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
EN 10349:2009	Steel castings - Austenitic manganese steel castings
DIN EN 14121:2009-09	ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS
EN 10089:2002	Hot-rolled steels for quenched and tempered springs - Technical delivery conditions
DIN EN 545:2011-09	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
DIN EN 13674-2:2011-01	RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
DIN EN 570:2007-04	Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification
DIN EN 14200:2004-05	Railway applications - Suspension components - Parabolic springs, steel
I.S. EN ISO 13533:2002	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT
DIN EN 14730-1:2010-12	RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES
DIN EN 14359:2017-09	GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
DIN EN 14354:2017-11	WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
UNE-EN 13674-2:2007	Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above
UNE-EN 13674-3:2007	Railway applications - Track - Rail - Part 3: Check rails
NF EN 1561 : 2011	FOUNDING - GREY CAST IRONS

Standards Referencing This Book - (Show below) - (Hide below)

ISO 6506-3:2014	Metallic materials Brinell hardness test Part 3: Calibration of reference blocks
ISO 6506-4:2014	Metallic materials — Brinell hardness test — Part 4: Table of hardness values
ISO 6506-2:2017	Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines
ISO 18265:2013	Metallic materials — Conversion of hardness values
ISO/IEC Guide 98-3:2008	Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
ISO 4498:2010	Sintered metal materials, excluding hardmetals Determination of apparent hardness and microhardness

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart