NF EN ISO 9015-1 : 2011
|
DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
DIN EN ISO 6506-2:2016-04 (Draft)
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
UNE-EN 14811:2007
|
Railway applications - Track - Special purpose rail - Grooved and associated construction |
UNE-EN 10088-5:2010
|
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
BS EN 4700-001:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip |
BS EN 10253-2:2007
|
Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements |
I.S. EN 14688:2015
|
SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
ISO 5922:2005
|
Malleable cast iron |
14/30303794 DC : 0
|
BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
I.S. EN ISO 11118:2015&LC:2015-12
|
GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015) |
PREN 17142 : DRAFT 2017
|
MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
PREN 438-2 : DRAFT 2014
|
HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
02/704957 DC : DRAFT NOV 2002
|
ISO 683-14 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 14: HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS |
ISO 13092:2012
|
Titanium and titanium alloys — Titanium sponge |
16/30258478 DC : 0
|
BS EN 13674-2 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
11/30196123 DC : DRAFT MAY 2011
|
BS ISO 11119-2 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 2: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS WITH LOAD-SHARING METAL LINERS |
ISO 404:2013
|
Steel and steel products — General technical delivery requirements |
ISO 16631:2016
|
Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement |
UNE-EN ISO 5182:2017
|
Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016) |
API 11D3 :2008
|
PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
10/30217322 DC : 0
|
BS EN 1338 - CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
12/30250149 DC : 0
|
BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
06/30148182 DC : DRAFT MAY 2006
|
ISO 7866 - GAS CYLINDERS REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING |
DIN EN ISO 11118:2016-03
|
GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS |
12/30254917 DC : DRAFT JAN 2012
|
BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
13/30290101 DC : 0
|
BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
17/30312468 DC : 0
|
BS ISO 15461 - STEEL FORGINGS - TESTING FREQUENCY, SAMPLING CONDITIONS AND TEST METHODS FOR MECHANICAL TESTS |
PREN 598 : DRAFT 2017
|
COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS |
17/30337413 DC : 0
|
BS EN ISO 4957 - TOOL STEELS |
BS EN 10088-5:2009
|
Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
UNE-EN 1563:2012
|
Founding - Spheroidal graphite cast irons |
DIN EN 12449:2015-11 (Draft)
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
API 7-1 : 2006 : ADD 3:2011(R2015)
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
BS EN ISO 14998:2013
|
Petroleum and natural gas industries. Downhole equipment. Completion accessories |
API 5DP CHINESE : 2009
|
SPECIFICATION FOR DRILL PIPE |
BS ISO 7689:2008
|
Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa. Procurement specification |
ISO 21988:2006
|
Abrasion-resistant cast irons Classification |
12/30273548 DC : 0
|
BS EN 61439-5 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
08/30168345 DC : DRAFT JULY 2008
|
BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
UNI EN 4700-006 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
DIN 17751:2002-09
|
TUBES OF WROUGHT NICKEL AND NICKEL ALLOYS - PROPERTIES |
13/30247437 DC : 0
|
BS EN ISO 683-17 - HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
BS ISO 17804:2005
|
Founding. Ausferritic spheroidal graphite ausferrite cast iron. Classification |
BIS IS 1500-2 : 2013
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
13/30279057 DC : 0
|
BS ISO 683-4 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 4: FREE-CUTTING STEELS |
DIN 6773:2001-04
|
HEAT TREATMENT OF FERROUS METALS - HEAT TREATED PARTS, PRESENTATION AND INDICATIONS ON DRAWINGS |
I.S. EN 10349:2009
|
STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS |
EN 10085:2001
|
Nitriding steels - Technical delivery conditions |
BS EN 15566:2016
|
Railway applications. Railway rolling stock. Draw gear and screw coupling |
UNI EN 13600 : 2013
|
COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
DIN EN 14811:2016-08 (Draft)
|
RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
09/30185939 DC : 0
|
BS EN 12513 - FOUNDING - ABRASION RESISTANT CAST IRONS |
BS EN 16124:2011
|
Founding. Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
DIN 3523:2001-04
|
Fittings for drinking water installations - Extensions |
12/30258463 DC : 0
|
BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
14/30311463 DC : 0
|
BS EN 14688 - SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
11/30254168 DC : 0
|
BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
BS EN 4700-005:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock |
BS EN ISO 9809-2:2010
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa |
DIN EN 10349:2010-02
|
Steel castings - Austenitic manganese steel castings |
PREN 14811 : DRAFT 2016
|
RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GRVED AND ASSOCIATED CONSTRUCTION |
12/30265276 DC : 0
|
BS EN 13001-3-3 - CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
13/30261096 DC : 0
|
BS EN ISO 17945 - MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
14/30275471 DC : 0
|
BS ISO 18137-1 - LEAF SPRINGS - PART 1: TECHNICAL REQUIREMENTS AND TEST METHODS |
17/30361645 DC : DRAFT SEP 2017
|
BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
BS ISO 11119-4:2016
|
Gas cylinders. Refillable composite gas cylinders. Design, construction and testing Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
06/30143946 DC : 0
|
EN 485-1 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN 1562:2012
|
Founding. Malleable cast irons |
BS EN ISO 7866:2012
|
Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing |
ISO 16468:2015
|
Investment castings (steel, nickel alloys and cobalt alloys) General technical requirements |
06/30148179 DC : DRAFT SEP 2006
|
ISO 9809-3 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
12/30251283 DC : 0
|
BS ISO 9809-4 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: STAINLESS STEEL CYLINDERS WITH AN R[M] VALUE OF LESS THAN 1100 MPA |
13/30256266 DC : 0
|
BS ISO 683-18 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 18: BRIGHT STEEL PRODUCTS |
BS EN 15594:2009
|
Railway applications. Track. Restoration of rails by electric arc welding |
04/30095196 DC : DRAFT MAY 2004
|
EN ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
BS EN ISO 3266 : 2010
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015) |
05/30128668 DC : DRAFT FEB 2005
|
ISO 7689 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT |
API 11D3 : 2008 : R2015
|
PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
UNI EN 13601 : 2013
|
COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
BIS IS/ISO 9170-1 : 2008
|
TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
BS ISO 13628-10 : 2005 AMD 16775
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE |
BS ISO 6305-2:2007
|
Railway components. Technical delivery requirements Non-alloy carbon steel baseplates |
06/30148176 DC : DRAFT SEP 2006
|
ISO 9809-2 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
UNI EN 13605 : 2013
|
COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
08/30190263 DC : DRAFT SEP 2008
|
BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
BIS IS 5531 : 2014
|
CAST IRON SPECIALS FOR ASBESTOS CEMENT PRESSURE PIPES FOR WATER AND SEWAGE - SPECIFICATION |
DIN 7603:2001-05
|
Sealing rings |
I.S. EN 13001-3-3:2014
|
CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
API SPEC 14L : 2007
|
SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
I.S. EN 14157:2017
|
NATURAL STONE TEST METHODS - DETERMINATION OF THE ABRASION RESISTANCE |
I.S. EN 16771:2016
|
RAILWAY APPLICATIONS - INFRASTRUCTURE - ALUMINOTHERMIC WELDING OF GROOVED RAILS |
I.S. CEN TS 15185:2006
|
FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
ISO 9352:2012
|
Plastics — Determination of resistance to wear by abrasive wheels |
I.S. EN 754-1:2016
|
ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN 13310:2015-09
|
KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
ISO 683-18:2014
|
Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products |
ISO 683-4:2016
|
Heat-treatable steels, alloy steels and free-cutting steels Part 4: Free-cutting steels |
I.S. EN 16725:2016
|
RAILWAY APPLICATIONS - TRACK - RESTORATION AND REPAIR OF MANGANESE CROSSINGS |
I.S. EN 1563:2011
|
FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
BS EN 14917 : 2009
|
METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
I.S. EN ISO 9809-2:2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
I.S. EN ISO 17078-4:2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
ISO 22034-1:2007
|
Steel wire and wire products — Part 1: General test methods |
EN 14917:2009+A1:2012
|
Metal bellows expansion joints for pressure applications |
ISO 683-5:2017
|
Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
17/30359541 DC : 0
|
BS EN 12797 - BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
18/30365854 DC : 0
|
BS EN 1337-6 - STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
15/30322070 DC : 0
|
BS EN 1563 - FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
I.S. EN 4700-007:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
ISO 16220:2017
|
Magnesium and magnesium alloys — Magnesium alloy ingots and castings |
ASTM F 3213 : 2017
|
Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
UNE-EN ISO 6506-2:2015
|
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014) |
NF EN ISO 3266 : 2010 AMD 1 2016
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES |
I.S. EN 10088-5:2009
|
STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
UNI EN ISO 11960 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
API 14L CHINESE : 2007
|
SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
EN 12167:2016
|
COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES |
EN 545:2010
|
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
EN 12165:2016
|
COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK |
DIN EN 13605:2013-09
|
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
DIN EN 13262:2011-06
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
DIN EN ISO 15156-2:2015-12
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
DIN EN ISO 5470-1:2015-04 (Draft)
|
RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
DIN EN 1982:2016-01 (Draft)
|
COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
DIN EN 13748-2:2005-03
|
Terrazzo tiles - Part 2: Terrazzo tiles for external use; German version EN 13748-2:2004 |
DIN EN ISO 11120:2015-05
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING (ISO 11120:2015) |
DIN EN 10208-1:2009-07
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
DIN EN 13604:2013-09
|
Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
DIN EN 14359 E : 2017
|
GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
BS EN 14525:2004
|
Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
BS EN ISO 13628-2:2006
|
Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
BS EN 13600:2013
|
Copper and copper alloys. Seamless copper tubes for electrical purposes |
BS EN ISO 14310:2008
|
Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs |
BS EN 14200:2004
|
Railway applications. Suspension components. Parabolic springs, steel |
UNE-EN ISO 898-1:2015
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
EN 1706:2010
|
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
BS EN 13835:2012
|
Founding. Austenitic cast irons |
UNE-EN 10272:2016
|
Stainless steel bars for pressure purposes |
UNE-EN 1559-1:2011
|
Founding - Technical conditions of delivery - Part 1: General |
BS EN 754-1:2016
|
Aluminium and aluminium alloys. Cold drawn rod/bar and tube Technical conditions for inspection and delivery |
UNE-EN 1706:2011
|
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
BS EN ISO 11960:2014
|
Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells |
BS EN 303-5:2012
|
Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking |
BS EN 1338:2003
|
Concrete paving blocks. Requirements and test methods |
UNE-EN 12513:2011
|
Founding - Abrasion resistant cast irons |
BS EN 10272:2007
|
Stainless steel bars for pressure purposes |
BS EN ISO 3506-3:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
BS EN 14730-1:2017
|
Railway applications. Track. Aluminothermic welding of rails Approval of welding processes |
BS EN 14616:2004
|
Thermal spraying. Recommendations for thermal spraying |
BS EN 12420:2014
|
Copper and copper alloys. Forgings |
BS EN 1559-1:2011
|
Founding. Technical conditions of delivery General |
BS EN 14772:2005
|
Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
I.S. EN 10084:2008
|
CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
I.S. EN 13601:2013
|
COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
DIN EN 1562:2012-05
|
FOUNDING - MALLEABLE CAST IRONS |
I.S. EN 459-2:2010
|
BUILDING LIME - PART 2: TEST METHODS |
UNI EN ISO 9170-1 : 2008
|
TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
I.S. EN 10218-1:2012
|
STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
EN 13230-3:2016
|
Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers |
EN ISO 19054:2006/A1:2016
|
RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005/AMD 1:2016) |
EN 10297-1:2003
|
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
EN 13001-3-3:2014
|
Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts |
EN 10277-1:2008
|
Bright steel products - Technical delivery conditions - Part 1: General |
EN 10331:2003
|
Magnetic materials - Specification for sintered soft magnetic materials |
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
CEN/TS 15718:2011
|
Railway applications - Wheelsets and bogies - Product requirements for cast wheels |
EN 10088-3:2014
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
CEN/TS 15185 : 2005
|
FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
DIN EN 10218-1:2012-03
|
STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
EN 10088-4:2009
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
DIN EN 14616:2005-02
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
EN 10272:2016
|
Stainless steel bars for pressure purposes |
EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
DIN EN 13001-3-3:2015-02
|
CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
EN 10208-1:2009
|
Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
EN ISO 11439:2013
|
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
EN 13322-2:2003/A1:2006
|
TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 2: STAINLESS STEEL |
DIN ISO 4498:2005-11
|
SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
DIN EN ISO 5470-1:2017-04
|
RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
EN ISO 9015-1:2011
|
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
ONORM EN 14917 : 2012
|
METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
EN 1337-4:2004/AC:2007
|
STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS |
EN 1337-6:2004
|
Structural bearings - Part 6: Rocker bearings |
EN 10218-1:2012
|
Steel wire and wire products - General - Part 1: Test methods |
EN 12513:2011
|
Founding - Abrasion resistant cast irons |
EN 1338:2003/AC:2006
|
CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
EN 12392:2016
|
Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
EN 10083-2:2006
|
Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
EN 15185:2011
|
Furniture - Assessment of the surface resistance to abrasion |
ONORM EN ISO 898-2 : 2012
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
EN 13600:2013
|
Copper and copper alloys - Seamless copper tubes for electrical purposes |
UNI EN 16482 : 2014
|
FOUNDING - CONTINUOUS CAST IRON BARS |
UNE-EN 13674-4:2007
|
Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m |
16/30314880 DC : 0
|
BS EN ISO 9170-1 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
BS EN 16451:2015
|
Railway applications. Braking. Brake pad holder |
API SPEC 11D1 : 2015
|
PACKERS AND BRIDGE PLUGS |
DIN ISO 4384-1:2014-07
|
Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials (ISO 4384-1:2012) |
10/30196141 DC : 0
|
BS ISO 11119-3 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 3: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES WITH NON-METALLIC AND NON-LOAD SHARING METAL LINERS |
DIN EN 14917:2012-06
|
Metal bellows expansion joints for pressure applications (includes Amendment A1:2012) |
BS EN ISO 9809-1:2010
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength less than 1100 MPa |
11/30230618 DC : 0
|
BS ISO 683-2 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 2: ALLOY STEELS FOR QUENCHING AND TEMPERING |
BS EN 4700-006:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings |
UNE-EN 61439-5:2015
|
Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks |
I.S. EN ISO 9809-1:2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
14/30285793 DC : 0
|
BS EN 16771 - RAILWAY APPLICATIONS - INFRASTRUCTURE - ALUMINOTHERMIC WELDING OF GROOVED RAILS |
05/30131069 DC : DRAFT MAR 2005
|
EN 598:2005 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
ISO 17918:2015
|
Corrosion of metals and alloys Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
I.S. EN 10208-2:2009
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
DIN EN ISO 3266:2016-05
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015) |
DIN EN 16273:2015-03
|
Railway applications - Track - Forged rail transitions |
UNI EN ISO 9809-3 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
13/30274822 DC : 0
|
BS ISO 11119-4 - GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES - DESIGN, CONSTRUCTION AND TESTING - PART 4: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 L WITH LOAD-SHARING WELDED METALLIC LINERS |
DIN EN 10253-2:2008-09
|
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
04/30095200 DC : DRAFT MAY 2004
|
EN ISO 6506-3 - METALLIC MATERIALS. BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
BS EN 10349:2009
|
Steel castings. Austenitic manganese steel castings |
I.S. EN 15566:2016
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
DIN EN 16451:2015-09
|
RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
API 64 : 2017-08
|
DIVERTER EQUIPMENT SYSTEMS |
UNE-EN 13001-3-3:2015
|
Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts |
UNI EN 13674-4 : 2010
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
BS EN 13674-2 : 2006
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
UNI EN 1562 : 2012
|
FOUNDING - MALLEABLE CAST IRONS |
13/30252100 DC : 0
|
BS ISO 4990 - STEEL CASTINGS - GENERAL TECHNICAL DELIVERY REQUIREMENTS |
11/30238890 DC : 0
|
BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES |
04/30094343 DC : DRAFT NOV 2004
|
ISO 21988 - ABRASION RESISTANT CAST IRONS - CLASSIFICATION |
I.S. EN ISO 9809-3:2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
02/713148 DC : DRAFT NOV 2002
|
BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
DIN EN 16482:2014-09
|
FOUNDING - CONTINUOUS CAST IRON BARS |
PREN 12513 : DRAFT 2009
|
FOUNDING - ABRASION RESISTANT CAST IRONS |
DIN EN 15594:2009-08
|
RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
ISO 20703:2006
|
Gas cylinders Refillable welded aluminium-alloy cylinders Design, construction and testing |
11/30253751 DC : 0
|
BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
BS ISO 4384-1:2012
|
Plain bearings. Hardness testing of bearing metals Multilayer bearings materials |
BS EN 14157:2017
|
Natural stone test methods. Determination of the abrasion resistance |
EN 4700-002:2016
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
NF EN ISO 9809-1 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
BS EN 14811 : 2006
|
RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
UNI EN ISO 9809-1 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
BS EN 16602-70-46:2014
|
Space product assurance. Requirements for manufacturing and procurement of threaded fasteners |
DD CEN/TS 15185:2005
|
Furniture. Assessment of the surface resistance to abrasion |
10/30216654 DC : 0
|
BS EN 12842 - DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
ISO 15461:2018
|
Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests |
PREN 10088-2 : DRAFT 2011
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
12/30246071 DC : 0
|
BS ISO 15787 - TECHNICAL PRODUCT DOCUMENTATION - HEAT-TREATED FERROUS PARTS - PRESENTATION AND INDICATIONS |
13/30252136 DC : 0
|
BS ISO 16468 - INVESTMENT CASTINGS (STEEL, NICKEL ALLOYS AND COBALT ALLOYS) - GENERAL TECHNICAL REQUIREMENTS |
DD ISO/TS 15869:2009
|
Gaseous hydrogen and hydrogen blends. Land vehicle fuel tanks |
BS ISO 404:2013
|
Steel and steel products. General technical delivery requirements |
DIN EN ISO 7866:2013-01
|
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
15/30312459 DC : 0
|
BS EN ISO 5182 - RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
05/30129363 DC : DRAFT AUG 2005
|
ISO 9170-1 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
UNI EN 15185 : 2011
|
FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
DD CEN/TS 15718:2011
|
Railway applications. Wheelsets and bogies. Product requirements for cast wheels |
API 11D1 REDLINE : 2009
|
PACKERS AND BRIDGE PLUGS |
06/30136240 DC : 0
|
EN 12020-1 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNE-EN ISO 9015-1:2011
|
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
05/30132585 DC : DRAFT APR 2005
|
EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
BS ISO 4498:2005
|
Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness |
12/30250146 DC : 0
|
BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS |
BS ISO 16220:2017
|
Magnesium and magnesium alloys. Magnesium alloy ingots and castings |
BS EN ISO 17078-3:2009
|
Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
API SPEC 16F : 2017
|
SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
ISO 4384-1:2012
|
Plain bearings Hardness testing of bearing metals Part 1: Multilayer bearings materials |
UNE-EN 14688:2016
|
Sanitary appliances - Wash basins - Functional requirements and test methods |
ISO 15787:2016
|
Technical product documentation Heat-treated ferrous parts Presentation and indications |
ISO 11119-3:2013
|
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners |
API 7-1:2006
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
BS EN ISO 11961:2008
|
Petroleum and natural gas industries. Steel drill pipe |
I.S. EN ISO 12679:2015
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
UNE-EN 16668:2016
|
Industrial valves - Requirements and testing for metallic valves as pressure accessories |
I.S. EN 12449:2016
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
ISO 1083:2004
|
Spheroidal graphite cast irons - Classification |
I.S. EN 16124:2011
|
FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS |
I.S. EN ISO 14998:2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013) |
ISO 18172-2:2007
|
Gas cylinders Refillable welded stainless steel cylinders Part 2: Test pressure greater than 6 MPa |
ISO 14661:2000
|
Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
ISO 683-1:2016
|
Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
ONORM EN ISO 11961 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
PREN 10272 : DRAFT 2013
|
STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
PREN ISO 683-17 : DRAFT 2013
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
EN 10253-2:2007
|
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
EN ISO 11961:2008/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
ISO 18137:2015
|
Leaf springs Technical specifications |
PREN 12797 : DRAFT 2017
|
BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
I.S. EN 61439-5:2015
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
BS EN 12449:2016
|
Copper and copper alloys. Seamless, round tubes for general purposes |
I.S. EN 16079:2011
|
FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS |
ISO 11119-2:2012
|
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners |
UNI EN 1563 : 2012
|
FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
I.S. EN ISO 9015-1:2011
|
DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
EN 1563:2011
|
Founding - Spheroidal graphite cast irons |
BS EN 13674-4 : 2006
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
UNE-EN 16273:2015
|
Railway applications - Track - Forged rail transitions |
API 19G1 : 2010
|
SIDE-POCKET MANDRELS |
ASTM F 3056 : 2014
|
Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
ASTM F 2924 : 2014 : REDLINE
|
Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
PREN 1337-6 : DRAFT 2018
|
STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
BS EN ISO 6506-2:2014
|
Metallic materials. Brinell hardness test Verification and calibration of testing machines |
NF EN ISO 17078-3 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
UNI EN 16124 : 2012
|
FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS |
ASTM F 3056 : 2014 : EDT 1
|
Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
UNE-EN 10088-4:2010
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
UNI EN 4700-007 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
I.S. EN 4700-006:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
UNI EN ISO 17078-3 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
ASTM F 3055 : 2014
|
Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
ASTM F 3055 : 2014 : EDT 1
|
Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
EN 10083-1:2006
|
Steels for quenching and tempering - Part 1: General technical delivery conditions |
I.S. EN 14811:2006
|
RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
EN 12164:2016
|
Copper and copper alloys - Rod for free machining purposes |
EN ISO 6506-3:2014
|
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014) |
I.S. EN 1562:2012
|
FOUNDING - MALLEABLE CAST IRONS |
I.S. EN 10253-2:2007
|
BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
EN 1982:2017
|
Copper and copper alloys - Ingots and castings |
EN 12168:2016
|
Copper and copper alloys - Hollow rod for free machining purposes |
DIN EN ISO 3506-3:2010-04
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
DIN EN 14730-1:2014-05 (Draft)
|
RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
DIN EN 755-1:2016-10
|
ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN 12842:2012-11
|
Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
DIN EN 1559-1:2011-05
|
Founding - Technical conditions of delivery - Part 1: General |
DIN EN ISO 898-1:2013-05
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
DIN EN 12167:2015-12 (Draft)
|
COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES |
DIN EN 14772 E : 2005
|
FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE EN 1514 AND EN 12560 SERIES OF STANDARDS |
DIN EN 598:2009-10
|
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009) |
DIN EN 12168:2015-12 (Draft)
|
COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
DIN EN 303-5:2012-10
|
Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
DIN EN 10269:2014-02
|
STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
DIN EN 12165:2015-12 (Draft)
|
COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK |
DIN EN ISO 4498:2010-11
|
Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
DIN EN 1337-6:2004-08
|
Structural bearings - Part 6: Rocker bearings |
DIN EN 14354:2005-03
|
WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
DIN EN 10297-1:2003-06
|
SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES |
DIN EN 14688 E : 2015
|
SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
DIN EN 12163:2015-12 (Draft)
|
COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES |
DIN EN 12164:2015-12 (Draft)
|
COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES |
DIN EN ISO 898-5:2012-09
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
DIN EN 14359:2011-04
|
GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
BS EN ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs |
BS EN 598 : 2007
|
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
BS EN 12163:2011
|
Copper and copper alloys. Rod for general purposes |
UNE-EN 545:2011
|
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
BS EN ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Nuts |
ISO 11960:2014
|
Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
ISO 18265:2013
|
Metallic materials Conversion of hardness values |
BS EN 13748-1 : 2004
|
TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL US |
BS EN 438-2 : 2016
|
HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
UNE-EN ISO 11120:2015
|
Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015) |
BS EN 13322-2:2003
|
Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction Stainless steel |
ONORM EN 1706 : 2013
|
ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
DIN EN 1559-2:2014-12
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
I.S. EN 485-1:2016
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 13600:2013
|
COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
I.S. EN ISO 11120:2015
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING (ISO 11120:2015) |
I.S. EN 13674-3:2006
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
I.S. EN ISO 13628-2:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
DIN EN 12513:2011-05
|
Founding - Abrasion resistant cast irons |
I.S. EN ISO 5470-1:2016
|
RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
I.S. EN 598:2007
|
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
I.S. EN 12842:2012
|
DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
I.S. EN 969:2009
|
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
ONORM EN 13262 : 2012
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
I.S. EN 570:2007
|
ALUMINIUM AND ALUMINIUM ALLOYS - IMPACT EXTRUSION SLUGS OBTAINED FROM WROUGHT PRODUCTS - SPECIFICATIONS |
DIN EN 10208-2:2009-07
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
EN 14772:2005
|
Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
I.S. EN 1982:2017
|
COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
I.S. EN ISO 15156-2:2015&LC:2015
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
DIN EN 13674-1:2011-04
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
DIN EN 13674-1:2017-07
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
I.S. EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
EN ISO 7866:2012/AC:2014
|
GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012/COR 1:2014) |
I.S. EN 12167:2016
|
COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES |
DIN EN 12420:1999-03
|
COPPER AND COPPER ALLOYS - FORGINGS |
I.S. EN 13835:2012
|
FOUNDING - AUSTENITIC CAST IRONS |
I.S. EN 13605:2013
|
COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
DIN EN 10208-1:1998-02
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
DIN EN 10088-2:2014-12
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
EN ISO 15156-2:2015
|
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015) |
I.S. EN ISO 18265:2013
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
I.S. EN 12168:2016
|
COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
DIN EN ISO 6506-3:2015-02
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6506-3:2014) |
I.S. EN 14354:2017
|
WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
I.S. EN 1559-1:2011
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
I.S. EN ISO 10432:2005
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
I.S. EN 13230-3:2016
|
RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS |
I.S. EN ISO 898-1:2013
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
I.S. EN 10269:2013
|
STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
I.S. EN 12020-1:2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 1559-2:2014
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
I.S. EN ISO 14310:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
I.S. EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
I.S. EN 12392:2016
|
ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
I.S. EN 10083-2:2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
I.S. EN 10272:2016&LC:2016
|
STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
I.S. EN 1561:2011
|
FOUNDING - GREY CAST IRONS |
I.S. EN 13604:2013
|
COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
I.S. EN 12513:2011
|
FOUNDING - ABRASION RESISTANT CAST IRONS |
I.S. EN 545:2010
|
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
I.S. EN 10088-3:2014
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
I.S. EN 303-1:2017
|
HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
I.S. EN 14730-1:2017
|
RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
I.S. EN 303-5:2012
|
HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
DIN EN ISO 6506-2:2015-02
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
DIN EN ISO 11439:2013-09
|
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
I.S. EN ISO 6506-3:2014
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6506-3:2014) |
I.S. EN 14394:2006
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
I.S. EN ISO 683-17:2014
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
DIN EN 10088-3:2014-12
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
DIN EN 10083-3:2007-01
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
I.S. EN ISO 898-5:2012
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012) |
I.S. EN 12165:2016
|
COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK |
I.S. EN ISO 16070:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
I.S. EN 13674-1:2011
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
I.S. EN 12164:2016
|
COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES |
I.S. EN 10277-1:2008
|
BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
DIN EN 10277-1:2008-06
|
BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
I.S. EN 1564:2011
|
FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS |
I.S. EN 12420:2014
|
COPPER AND COPPER ALLOYS - FORGINGS |
I.S. EN ISO 4498:2010
|
SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
I.S. EN ISO 3506-3:2009
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
I.S. EN 14359:2017
|
GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
I.S. EN 12163:2016
|
COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES |
I.S. EN 755-1:2016
|
ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN ISO 11439:2013
|
GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES (ISO 11439:2013) |
UNI EN ISO 14998 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES |
SBAC TS 220 : 1
|
TECHNICAL SPECIFICATION FOR UNION NUTS, SELF-LOCKING (UNIFIED THREADS) - HIGH TEMPERATURE NICKEL ALLOY INCONEL 718 CLASSIFICATION R[M] >= 1270 MPA (185000 LBF/IN[2]) @ T[A]/+705 DEGREES C |
VDI 3405-2-1 : 2015 COR 2017
|
ADDITIVE MANUFACTURING PROCESSES, RAPID MANUFACTURING - LASER BEAM MELTING OF METALLIC PARTS; MATERIAL DATA SHEET ALUMINIUM ALLOY ALSI10MG |
VDI 3405 Blatt 2:2013-08
|
Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
UNE-EN 16482:2014
|
Founding - Continuous cast iron bars |
DIN EN 1563:2015-07 (Draft)
|
FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
UNI EN ISO 9170-2 : 2008
|
TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
06/30143291 DC : DRAFT MAY 2006
|
ISO 5182 - WELDING - MATERIALS FOR RESISTANCE WELDING ELECTRODES AND ANCILLARY EQUIPMENT |
NF EN ISO 9809-3 : 2011
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
API SPEC 19OH : 2018
|
OPENHOLE ISOLATION EQUIPMENT |
PREN 12842 : DRAFT 2010
|
DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
BS EN 16079:2011
|
Founding. Compacted (vermicular) graphite cast irons |
15/30296029 DC : 0
|
BS ISO 4955 - HEAT-RESISTANT STEELS |
BS EN 4700-004:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire |
09/30202316 DC : 0
|
BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
BS ISO 17918:2015
|
Corrosion of metals and alloys. Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
BS EN ISO 17078-4:2010
|
Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment CD-ROM |
08/30181473 DC : DRAFT JULY 2008
|
BS EN 545 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
03/116565 DC : DRAFT OCT 2003
|
ISO 20703 - GAS CYLINDERS - REFILLABLE WELDED ALUMINIUM ALLOY - DESIGN, CONSTRUCTION AND TESTING |
BS ISO 16468:2015
|
Investment castings (steel, nickel alloys and cobalt alloys). General technical requirements |
NF EN ISO 11961 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
03/114555 DC : DRAFT SEP 2003
|
EN 14772 - FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560 |
API 19G1 CHINESE : 2010
|
SIDE-POCKET MANDRELS |
API 14A : 2015
|
SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
API 16A : 2017
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
BS EN 13001-3-3:2014
|
Cranes. General design Limit states and proof of competence of wheel/rail contacts |
BS EN 4700-002:2016
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
08/30182454 DC : DRAFT JULY 2008
|
BS EN 10208-1 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
UNI EN 4700-005 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
API7-1 RUSSIAN-2006+ADD3-2011(R2015)
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
NF ISO 7795 : 2011
|
CROSS-COUNTRY SKIS - SKI-BINDING SCREWS - TEST METHODS |
BS EN ISO 9015-1:2011
|
Destructive tests on welds in metallic materials. Hardness testing Hardness test on arc welded joints |
BS EN 15185:2011
|
Furniture. Assessment of the surface resistance to abrasion |
17/30354758 DC : DRAFT JUL 2017
|
BS ISO 185 - GREY CAST IRONS - CLASSIFICATION AND SPECIFICATION |
14/30295082 DC : 0
|
BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS |
DIN EN 13001-3-3 E : 2015
|
CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
08/30180643 DC : DRAFT APRIL 2008
|
BS ISO 15869-3 - GASEOUS HYDROGEN AND HYDROGEN BLENDS - LAND VEHICLE FUEL TANKS |
I.S. EN 10083-1:2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
UNI EN 4700-004 : 2011
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
09/30200834 DC : 0
|
BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
I.S. EN 16602-70-46:2014
|
SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS |
DIN EN 15594 E : 2009
|
RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
API SPEC 17J : 2014
|
SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
PREN 754-1 : DRAFT 2015
|
ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN ISO 9809-3:2010
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Normalized steel cylinders |
BS ISO 4990:2015
|
Steel castings. General technical delivery requirements |
UNI EN 303-5 : 2012
|
HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
12/30261889 DC : 0
|
BS EN 12420 - COPPER AND COPPER ALLOYS - FORGINGS |
13/30288572 DC : 0
|
BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
07/30168419 DC : 0
|
BS EN 1982 - COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
16/30339349 DC : DRAFT APR 2016
|
BS EN ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
12/30267860 DC : 0
|
BS EN 16482 - FOUNDING - CONTINUOUS CAST IRON BARS |
DIN EN ISO 17945 E : 2015
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
UNE-EN 15185:2011
|
Furniture - Assessment of the surface resistance to abrasion |
DIN EN ISO 12679:2015-12
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
API 5DP : 2010(R2015)
|
SPECIFICATION FOR DRILL PIPE |
11/30210148 DC : 0
|
BS EN ISO 18265 - METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
08/30187526 DC : 0
|
BS EN 14121 - ALUMINIUM AND ALUMINIUM ALLOYS - ALUMINIUM SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
BS EN 60439-5:2006
|
Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks |
DIN EN ISO 9809-3:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
15/30324460 DC : 0
|
BS EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
02/121747 DC : DRAFT APR 2002
|
PREN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
BS EN ISO 9170-2:2008
|
Terminal units for medical gas pipeline systems Terminal units for anaesthetic gas scavenging systems |
11/30230615 DC : 0
|
BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING |
DIN EN ISO 12679 E : 2015
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
ISO 7206-10:2003
|
Implants for surgery Partial and total hip-joint prostheses Part 10: Determination of resistance to static load of modular femoral heads |
BS ISO 18172-1:2007
|
Gas cylinders. Refillable welded stainless steel cylinders Test pressure 6 MPa and below |
BS ISO 18137:2015
|
Leaf springs. Technical specifications |
BS ISO 14661:2000
|
Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
BS EN 16771:2016
|
Railway applications. Infrastructure. Aluminothermic welding of grooved rails |
05/30132603 DC : DRAFT APR 2005
|
EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
05/30126202 DC : 0
|
EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
BS EN ISO 898-2:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread |
I.S. EN 10085:2001
|
NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS |
BS EN 10083-3 : 2006-08
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
DIN EN 14917 E : 2012
|
METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
API 19G4 : 2011
|
PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
API 7-1 SPANISH : 2006
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
I.S. EN 16273:2014
|
RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
EN 438-2:2016
|
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
PREN 14688 : DRAFT 2014
|
SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
API SPEC 17K : 2017
|
SPECIFICATION FOR BONDED FLEXIBLE PIPE |
BS EN ISO 12679:2015
|
Thermal spraying. Recommendations for thermal spraying |
DIN EN 14688:2015-10
|
SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
API 11D1 CHINESE : 2009
|
PACKERS AND BRIDGE PLUGS |
I.S. EN 4700-001:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
API 7-1 : 2006 : INC : ADD 3 : 2011 : R2015
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
ISO 24338:2014
|
Laminate floor coverings Determination of abrasion resistance |
EN 14157:2017
|
Natural stone test methods - Determination of the abrasion resistance |
UNI EN 4700-003 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
API 16AR : 2017
|
STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
I.S. EN ISO 9170-2:2008
|
TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
ISO 11119-1:2012
|
Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l |
I.S. EN 60439-5:2006
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
ISO 18119:2018
|
Gas cylinders — Seamless steel and seamless aluminium-alloy gas cylinders and tubes — Periodic inspection and testing |
KTA 3211.1 : 2015
|
PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
I.S. EN ISO 7866:2012
|
GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012) |
UNE-EN ISO 898-2:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
EN 1562:2012
|
Founding - Malleable cast irons |
17/30347070 DC : 0
|
BS EN 10340-2 - STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS |
PREN 15566 : DRAFT 2013
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
PREN 12420 : DRAFT 2012
|
COPPER AND COPPER ALLOYS - FORGINGS |
BS EN 16668 : 2016
|
INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
EN 13674-4:2006+A1:2009
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
UNI EN ISO 7866 : 2012
|
GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING |
PREN 1559-2 : DRAFT 2012
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
ISO 9809-4:2014
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa |
DIN EN 1564:2012-01
|
Founding - Ausferritic spheroidal graphite cast irons |
UNI EN ISO 11961 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
ISO 11891:2012
|
Hot formed helical compression springs — Technical specifications |
ISO 17804:2005
|
Founding Ausferritic spheroidal graphite cast irons Classification |
DIN EN 1706:2013-12
|
ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
I.S. EN ISO 17078-3:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
EN 12420:2014
|
Copper and copper alloys - Forgings |
UNE-EN 10088-2:2015
|
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
I.S. EN 14917:2009
|
METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
EN 1561:2011
|
Founding - Grey cast irons |
ISO 6336-5:2016
|
Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
EN 12163:2016
|
Copper and copper alloys - Rod for general purposes |
DIN EN 12392:2016-08
|
Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
DIN EN 10083-1:2006-10
|
STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
DIN EN 754-1:2016-10
|
ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN ISO 683-17:2015-02
|
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
DIN EN 13748-1:2005-08
|
TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL USE |
EN ISO 13628-2:2006/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
DIN EN 12420:2014-09
|
COPPER AND COPPER ALLOYS - FORGINGS |
DIN EN ISO 11960:2014-05
|
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
UNE-EN 10208-1:2011
|
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A |
DIN EN 1337-4 E : 2004
|
STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS |
DIN EN 14525 E : 2005
|
DUCTILE IRON WIDE TOLERANCE COULINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U, PE, FIBRE-CEMENT |
DIN EN 10089:2003-04
|
Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002 |
DIN EN 14394 E : 2008
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
DIN EN 14394:2008-12
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
UNE-EN 14730-1:2018
|
Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
DIN EN ISO 19054:2006-09
|
RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005 + AMD1:2016) |
ISO 17078-4:2010
|
Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment |
BS EN 13674-1 : 2011
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
BS EN 459-2:2010
|
Building lime Test methods |
BS EN 545:2010
|
Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods |
BS EN 10208-2:2009
|
Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B |
IEC 60439-5:2006
|
Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks |
UNE-EN 755-1:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
BS EN 969:2009
|
Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods |
UNE-EN 459-2:2011
|
Building lime - Part 2: Test methods |
BS EN ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
BS EN ISO 17078-2:2007
|
Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels |
BS EN 12168:1998
|
Copper and copper alloys. Hollow rod for free machining purposes |
ISO 9015-1:2001
|
Destructive tests on welds in metallic materials Hardness testing Part 1: Hardness test on arc welded joints |
UNE-EN 12842:2013
|
Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
UNE-EN 10088-3:2015
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
DIN EN 1337-4:2004-08
|
Structural bearings - Part 4: Roller bearings |
UNE-EN 1982:2018
|
Copper and copper alloys - Ingots and castings |
BS EN 1706:2010
|
Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties |
UNE-EN 1564:2012
|
Founding - Ausferritic spheroidal graphite cast irons |
UNI EN ISO 3506-2 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS |
EN ISO 9170-1:2008
|
Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2008) |
UNI EN 13262 : 2011
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
ONORM EN ISO 9170-1 : 2008
|
TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
UNE-EN 12449:2016
|
Copper and copper alloys - Seamless, round tubes for general purposes |
UNI EN 1706 : 2010
|
ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
EN ISO 6506-2:2014
|
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014) |
ONORM EN ISO 3506-2 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
ONORM EN 13674-4 : 2011
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
I.S. EN 13262:2004
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
EN 13262:2004+A2:2011
|
Railway applications - Wheelsets and bogies - Wheels - Product requirements |
UNI EN ISO 3506-1 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
ONORM EN ISO 3506-1 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
EN 485-1:2016
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
EN 14354:2017
|
Wood-based panels - Wood veneer floor coverings |
UNI EN 10088-3 : 2014
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNI EN 10208-2 : 2009
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
UNI EN ISO 17078-2 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
UNI EN ISO 4498 : 2010
|
SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
UNI EN ISO 683-17 : 2014
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS |
UNI EN ISO 17078-1 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
UNI EN 10269 : 2013
|
Nickel steels and alloys for fasteners with specific properties at high and / or low temperatures |
UNI EN 12513 : 2011
|
Founding - Abrasion resistant cast irons |
UNI EN 13835 : 2012
|
FOUNDING - AUSTENITIC CAST IRONS |
UNI EN 10083-1 : 2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
UNI EN 14394 : 2008
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C |
EN 1559-2:2014
|
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
UNI EN ISO 18265 : 2014
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
UNI EN 1559-2 : 2014
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
UNI EN 14525 : 2005
|
DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT |
UNI EN 969 : 2009
|
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
UNI EN 10083-3 : 2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
UNI EN 12842 : 2012
|
DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
UNI EN 12420 : 2014
|
COPPER AND COPPER ALLOYS - FORGINGS |
UNI EN 1561 : 2011
|
FOUNDING - GREY CAST IRONS |
EN ISO 10432:2004
|
Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
UNI EN 10218-1 : 2012
|
STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS |
UNI EN ISO 13628-2 : 2007
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
UNI EN 10208-1 : 2009
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
UNI EN ISO 898-1 : 2013
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
UNI EN 1559-1 : 2011
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
UNI EN ISO 3506-3 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
UNI EN 1564 : 2011
|
FOUNDING - AUSFERRITIC SPHEROIDAL GRAFITE CAST IRONS |
UNI EN 13674-3 : 2010
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
I.S. EN 14525:2005
|
DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT |
UNI EN 545 : 2010
|
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
EN ISO 13628-10:2006
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
UNI EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
UNI EN ISO 14310 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
UNI EN 10084 : 2008
|
CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
UNI EN ISO 898-5 : 2012
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD |
UNI EN 1338 : 2004
|
CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
UNI EN 14121 : 2009
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
UNI EN 598 : 2009
|
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
UNI EN 755-1 : 2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNI EN 13604 : 2013
|
COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
UNE-EN 10349:2011
|
Steel castings - Austenitic manganese steel castings |
UNI EN 10349 : 2009
|
STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS |
UNI CEN/TS 15718 : 2011
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
UNI EN 15594 : 2009
|
RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
10/30165716 DC : 0
|
BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
DIN EN 15185:2011-07
|
Furniture - Assessment of the surface resistance to abrasion |
DIN EN 16124:2012-02
|
Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
BS EN 16273:2014
|
Railway applications. Track. Forged rail transitions |
EN 303-5:2012
|
Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
I.S. EN ISO 9170-1:2008
|
TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
07/30161097 DC : 0
|
EN ISO 14310 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT PACKERS AND BRIDGE PLUGS |
15/30317619 DC : 0
|
BS EN ISO 5470-1 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER |
NF EN ISO 9809-2 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
10/30198921 DC : 0
|
BS ISO 11891 - HOT FORMED HELICAL COMPRESSION SPRINGS - TECHNICAL SPECIFICATIONS |
I.S. EN ISO 5182:2016
|
RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
14/30284697 DC : 0
|
BS ISO 683-5 - HEAT TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 5: NITRIDING STEELS |
DIN ISO 7795:2011-11
|
Cross-country skis - Ski-binding screws - Test methods (ISO 7795:2011) |
ISO 11119-4:2016
|
Gas cylinders Refillable composite gas cylinders Design, construction and testing Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
DIN 21530-4:2016-09
|
MINE SUPPORT - PART 4: TESTING |
BS EN 16725:2016
|
Railway applications. Track. Restoration and repair of manganese crossings |
DIN EN ISO 9170-2 E : 2009
|
TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
DIN EN 303-1:2016-07 (Draft)
|
HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
BS ISO 16143-2:2014
|
Stainless steels for general purposes Corrosion-resistant semi-finished products, bars, rods and sections |
DIN EN 10088-4:2010-01
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
16/30340174 DC : 0
|
BS ISO 16220 - MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOY INGOTS AND CASTINGS |
BS ISO 18172-2:2007
|
Gas cylinders. Refillable welded stainless steel cylinders Test pressure greater than 6 MPa |
13/30264734 DC : 0
|
BS ISO 17918 - EVALUATION OF SELECTIVE CORROSION OF ALLOYS BY VISUAL INSPECTION AND HARDNESS MEASUREMENT |
ISO 2531:2009
|
Ductile iron pipes, fittings, accessories and their joints for water applications |
14/30297210 DC : 0
|
BS EN 16273 - RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
BS EN ISO 5182:2009
|
Resistance welding. Materials for electrodes and ancillary equipment |
06/30148173 DC : DRAFT SEP 2006
|
ISO 9809-1 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
ISO 6506-2:2017
|
Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines |
BS EN 61439-5:2015
|
Low-voltage switchgear and controlgear assemblies Assemblies for power distribution in public networks |
BS ISO 683-5:2017
|
Heat treatable steels, alloy steels and free-cutting steels Nitriding steels |
UNI EN 16079 : 2012
|
FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS |
04/19993251 DC : DRAFT FEB 2004
|
BS ISO 3522 - CAST ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
10/30196135 DC : 0
|
BS ISO 11515 - GAS CYLINDERS - REFILABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
ISO 9170-1:2017
|
Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
14/30311457 DC : 0
|
BS EN 13310 - KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
I.S. EN 4700-002:2016
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
BS ISO 21988:2006
|
Abrasion-resistant cast irons. Classification |
PREN 13674-4 : DRAFT 2016
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
DIN EN ISO 9015-1:2011-05
|
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
BS ISO 9352:2012
|
Plastics. Determination of resistance to wear by abrasive wheels |
12/30266615 DC : 0
|
BS EN 1559-2 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
BS EN 13329 : 2016
|
LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
ASTM F 3302 : 2018
|
Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
UNE-EN ISO 12679:2016
|
Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
BS ISO 7206-10:2003
|
Implants for surgery. Partial and total hip-joint prostheses Determination of resistance to static load of modular femoral heads |
BS EN 4700-003:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube |
DIN EN 13674-4:2016-05 (Draft)
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
13/30289253 DC : 0
|
BS EN 13329 - LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
PREN 14121 : DRAFT 2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - ALUMINIUM SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
PREN 14157 : DRAFT 2016
|
NATURAL STONE TEST METHODS - DETERMINATION OF THE ABRASION RESISTANCE |
13/30241415 DC : 0
|
BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
DIN EN 10088-5:2009-07
|
STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
BS ISO 9809-4:2014
|
Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Stainless steel cylinders with an Rm value of less than 1 100 MPa |
12/30259634 DC : 0
|
BS ISO 15399 - GASEOUS HYDROGEN - CYLINDERS AND TUBES FOR STATIONARY STORAGE |
UNI EN 14917 : 2012
|
METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
11/30230612 DC : 0
|
BS ISO 683-11 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 11: CASE-HARDENING STEELS |
API 7-1 : 2006 : INC : ADD 3 : 2011
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
DIN EN 16079:2012-02
|
Founding - Compacted (vermicular) graphite cast irons; German version EN 16079:2011 |
API 14L : 2007 : R2012
|
SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
API 6DSS : 2017-08
|
SPECIFICATION FOR SUBSEA PIPELINE VALVES |
BS EN 16482:2014
|
Founding. Continuous cast iron bars |
BS ISO 16143-1:2014
|
Stainless steels for general purposes Corrosion-resistant flat products |
04/30107683 DC : DRAFT DEC 2004
|
BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
BS EN ISO 11118:2015
|
Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods |
04/30103964 DC : DRAFT MAY 2004
|
BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
UNE-EN 438-2:2016
|
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties |
CSA Z9170.1 : 2011 : R2015
|
TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES, VACUUM, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
CSA Z9170.1 : 2011
|
TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES, VACUUM, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
UNI EN 13674-2 : 2010
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
DIN EN ISO 9809-1:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
API SPEC 16C : 2015
|
CHOKE AND KILL EQUIPMENT |
EN 14688:2015
|
Sanitary appliances - Wash basins - Functional requirements and test methods |
IS 1367 : Part 3 : 2017
|
TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS |
EN 13310:2015
|
Kitchen sinks - Functional requirements and test methods |
UNE-EN ISO 11118:2016
|
Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO 11118:2015) |
BS EN 10088-4:2009
|
Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
API 7-1 CHINESE : 2006
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
API 17J REDLINE : 2008
|
SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
PREN 13230-3 : DRAFT 2014
|
RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS |
API 14A RUSSIAN : 2001
|
SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
API 19G3 : 2011
|
RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
ISO 10432:2004
|
Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
I.S. EN 16482:2014
|
FOUNDING - CONTINUOUS CAST IRON BARS |
ONORM EN ISO 11960 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
I.S. EN 15185:2011
|
FLUESSIGGAS-GERAETE UND AUSRUESTUNGSTEILE - KENNZEICHNUNG VON FLASCHEN UND FAESSERN |
I.S. EN ISO 3266:2010
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010) |
I.S. EN 438-2:2016
|
HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
ISO 18172-1:2007
|
Gas cylinders Refillable welded stainless steel cylinders Part 1: Test pressure 6 MPa and below |
UNI EN ISO 898-2 : 2012
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
I.S. EN ISO 17945:2015
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
ISO 2415:2004
|
Forged shackles for general lifting purposes — Dee shackles and bow shackles |
I.S. EN 13329:2016
|
LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
BS EN 13310 : 2015
|
KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
PREN 10269 : DRAFT 2011
|
STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
ISO 13584-511:2006
|
Industrial automation systems and integration — Parts library — Part 511: Mechanical systems and components for general use — Reference dictionary for fasteners |
DIN EN ISO 9170-1 E : 2008
|
TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
UNE-EN 1562:2012
|
Founding - Malleable cast irons |
ISO 16143-1:2014
|
Stainless steels for general purposes Part 1: Corrosion-resistant flat products |
UNI EN 14811 : 2010
|
RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
PREN 13674-2 : DRAFT 2016
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
UNI EN 4700-001 : 2011
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
ONORM EN 13601 : 2013
|
COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
ONORM EN 13605 : 2013
|
COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
UNE-EN 16124:2012
|
Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
ISO/TS 15869:2009
|
Gaseous hydrogen and hydrogen blends Land vehicle fuel tanks |
EN 10083-3:2006/AC:2008
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
DIN EN 438-2:2016-06
|
HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
ISO 7186:2011
|
Ductile iron products for sewerage applications |
ISO 5003:2016
|
Flat bottom (Vignole) railway rails 43 kg/m and above |
UNI EN 459-2 : 2010
|
BUILDING LIME - PART 2: TEST METHODS |
DIN EN ISO 9170-1:2016-09 (Draft)
|
TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
EN 14811:2006+A1:2009
|
RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
EN 754-1:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
PREN 10340-2 : DRAFT 2017
|
STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS |
EN 13329:2016+A1:2017
|
Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
PREN 1338 : DRAFT 2010
|
CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS |
ISO 11515:2013
|
Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing |
ISO 4990:2015
|
Steel castings — General technical delivery requirements |
ISO 16143-2:2014
|
Stainless steels for general purposes Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
I.S. EN 13674-4:2006
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
ISO 4955:2016
|
Heat-resistant steels |
I.S. EN 13674-2:2006
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
ISO 4384-2:2011
|
Plain bearings Hardness testing of bearing metals Part 2: Solid materials |
I.S. EN 4700-005:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
API 7-1 : 2006/ADD 4 : 2019
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
ISO 683-11:2012
|
Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels |
I.S. EN ISO 6506-2:2014
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
ONORM EN ISO 9809-3 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
DIN EN 14653-2:2005-07
|
MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 2: ASSESSMENT BY CALCULATION OR TEST |
DIN EN 485-1:2016-10
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNE-EN 10208-2:2011
|
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
ONORM EN 459-2 : 2010
|
BUILDING LIME - PART 2: TEST METHODS |
DIN EN 969:2009-07
|
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
DIN EN 459-2:2010-12
|
Building lime - Part 2: Test methods |
DIN EN 10084:2008-06
|
CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
DIN EN ISO 10692-1 E : 2003
|
GAS CYLINDERS - GAS CYLINDER VALVE CONNECTIONS FOR USE IN THE MICROELECTRONIC INDUSTRY - PART 1: OUTLET CONNECTIONS |
DIN EN ISO 18265:2014-02
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
DIN EN 10085:2001-07
|
Nitriding steels - Technical delivery conditions; English version of DIN EN 10085 |
DIN EN 10272:2016-10
|
STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
BS EN 12392:2016
|
Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment |
BS EN 1564:2011
|
Founding. Ausferritic spheroidal graphite cast irons |
BS EN 13605:2013
|
Copper and copper alloys. Copper profiles and profiled wire for electrical purposes |
BS EN 14354:2017
|
Wood-based panels. Wood veneer floor coverings |
BS EN 1559-2:2014
|
Founding. Technical conditions of delivery Additional requirements for steel castings |
BS EN 12165:2011
|
Copper and copper alloys. Wrought and unwrought forging stock |
BS EN ISO 10432:2004
|
Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
BS EN 14394 : 2005
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
ISO 12679:2011
|
Thermal spraying Recommendations for thermal spraying |
BS EN 1982:2017
|
Copper and copper alloys. Ingots and castings |
BS EN ISO 13628-10:2006
|
Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
BS EN ISO 15156-2:2015
|
Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons |
BS EN 12513:2011
|
Founding. Abrasion resistant cast irons |
UNE-EN ISO 3506-2:2010
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
BS EN 10084 : 2008-06
|
CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
BS EN 14359:2017
|
Gas-loaded accumulators for fluid power applications |
BS EN ISO 5470-1:2016
|
Rubber- or plastics-coated fabrics. Determination of abrasion resistance Taber abrader |
BS EN 755-1:2016
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Technical conditions for inspection and delivery |
ISO 3266:2010
|
Forged steel eyebolts grade 4 for general lifting purposes |
ISO 9170-2:2008
|
Terminal units for medical gas pipeline systems — Part 2: Terminal units for anaesthetic gas scavenging systems |
BS EN ISO 4498:2010
|
Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness |
BS EN 10331:2003
|
Magnetic materials. Specification for sintered soft magnetic materials |
BS EN 13262 : 2004
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
EN ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
BS EN 485-1 : 2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN ISO 19054 : 2006
|
RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005) |
UNE-EN 13601:2014
|
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
ISO 16070:2005
|
Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
I.S. EN ISO 3506-2:2009
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
BS EN 1561:2011
|
Founding. Grey cast irons |
BS EN 10083-2:2006
|
Steels for quenching and tempering Technical delivery conditions for non alloy steels |
BS EN ISO 15136-2:2006
|
Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
BS EN 13674-3 : 2006
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
ISO 17078-2:2007
|
Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels |
BS EN 14653-2:2005
|
Manually operated hydraulic shoring systems for groundwork support Assessment by calculation or test |
UNE-EN 754-1:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
ONORM EN ISO 9809-2 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
BS EN ISO 10424-1:2004
|
Petroleum and natural gas industries. Rotary drilling equipment Rotary drill stem elements |
BS EN 1337-6:2004
|
Structural bearings Rocker bearings |
BS EN 10218-1:2012
|
Steel wire and wire products. General Test methods |
BS EN ISO 16070:2005
|
Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
UNE-EN 13230-3:2016
|
Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers |
UNE-EN ISO 6506-3:2015
|
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014) |
ISO 15136-2:2006
|
Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
BS EN 13748-2:2004
|
Terrazzo tiles Terrazzo tiles for external use |
BS EN 10083-1:2006
|
Steels for quenching and tempering General technical delivery conditions |
ISO 11118:2015
|
Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods |
ISO 898-5:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
ISO 7795:2011
|
Cross-country skis — Ski-binding screws — Test methods |
BS EN 10088-3:2014
|
Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
ISO 9809-2:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
ISO 10692-1:2001
|
Gas cylinders — Gas cylinder valve connections for use in the micro-electronics industry — Part 1: Outlet connections |
ISO 5470-1:2016
|
Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 1: Taber abrader |
UNE-EN 10269:2014
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
BS EN 12167:2011
|
Copper and copper alloys. Profiles and bars for general purposes |
UNE-EN 13835:2012
|
Founding - Austenitic cast irons |
ISO 4498:2010
|
Sintered metal materials, excluding hardmetals Determination of apparent hardness and microhardness |
UNE-EN ISO 11439:2013
|
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO/FDIS 11439:2013) |
BS EN ISO 683-17:2014
|
Heat-treated steels, alloy steels and free-cutting steels Ball and roller bearing steels |
ISO 7866:2012
|
Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
IEC 61439-5:2014
|
Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks |
ISO 9809-3:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
ISO 14998:2013
|
Petroleum and natural gas industries — Downhole equipment — Completion accessories |
ISO 14310:2008
|
Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs |
ISO 11120:2015
|
Gas cylinders Refillable seamless steel tubes of water capacity between 150 l and 3000 l Design, construction and testing |
BS EN 13230-3:2016
|
Railway applications. Track. Concrete sleepers and bearers Twin-block reinforced sleepers |
ISO 9809-1:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
ISO 15156-2:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
BS EN ISO 10692-1:2001
|
Gas cylinders. Gas cylinder valve connections for use in the microelectronics industry Outlet connections |
ISO 13625:2002
|
Petroleum and natural gas industries — Drilling and production equipment — Marine drilling riser couplings |
UNE-EN 13600:2014
|
Copper and copper alloys - Seamless copper tubes for electrical purposes |
ISO 898-2:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
ISO 683-17:2014
|
Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels |
BS EN ISO 17078-1 : 2004
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
I.S. EN 1706:2010
|
ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
ISO 5182:2016
|
Resistance welding Materials for electrodes and ancillary equipment |
UNE-EN ISO 3506-3:2010
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
UNE-EN 12420:2015
|
Copper and copper alloys - Forgings |
BS EN 13601:2013
|
Copper and copper alloys. Copper rod, bar and wire for general electrical purposes |
UNE-EN ISO 18265:2014
|
Metallic materials - Conversion of hardness values (ISO 18265:2013) |
I.S. EN ISO 3506-1:2009
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
UNE-EN 14354:2017
|
Wood-based panels - Wood veneer floor coverings |
UNE-EN 13262:2005
|
Railway applications - Wheelsets and bogies - Wheels - Product requirement. |
UNE-EN 13329:2016
|
Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
ISO 17078-3:2009
|
Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
BS EN 12164:2011
|
Copper and copper alloys. Rod for free machining purposes |
ISO 19054:2005
|
Rail systems for supporting medical equipment |
UNE-EN ISO 683-17:2015
|
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
BS EN 12020-1:2008
|
Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Technical conditions for inspection and delivery |
BS EN 13604:2013
|
Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper |
BS EN ISO 11120:2015
|
Gas cylinders. Refillable seamless steel tubes of water capacity between 150 l and 3000 l. Design, construction and testing |
UNE-EN ISO 898-5:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
UNE-EN 10218-1:2012
|
Steel wire and wire products - General - Part 1: Test methods |
BS EN 14688 : 2015
|
SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
EN ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
EN ISO 11118 : 2015 COR 2015
|
GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015) |
UNE-EN ISO 7866:2013
|
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
ISO 17078-1:2004
|
Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels |
BS EN 10085 : 2001-05
|
NITRIDING STEEL - TECHNICAL DELIVERY CONDITIONS |
ISO 17945:2015
|
Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
BS EN ISO 11439:2013
|
Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
ISO 13628-2:2006
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
ISO 6506-3:2014
|
Metallic materials Brinell hardness test Part 3: Calibration of reference blocks |
UNE-EN 485-1:2017
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
DIN EN 13835:2012-04
|
FOUNDING - AUSTENITIC CAST IRONS |
DIN ISO 4384-1:2001-02
|
PLAIN BEARINGS - HARDNESS TESTING OF BEARING METALS - PART 1: MULTILAYER BEARINGS MATERIALS (ISO 4384-1:2012) |
EN 15594:2009
|
Railway applications - Track - Restoration of rails by electric arc welding |
UNI EN 12020-1 : 2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
EN 755-1:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
EN 14653-2:2005
|
Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test |
EN 14359:2017
|
Gas-loaded accumulators for fluid power applications |
EN ISO 17945:2015
|
Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015) |
EN ISO 683-17:2014
|
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
EN 13835:2012
|
Founding - Austenitic cast irons |
EN ISO 10424-1:2004
|
Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements (ISO 10424-1:2004) |
EN 14394:2005+A1:2008
|
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
EN ISO 12679:2015
|
Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
EN ISO 10692-1:2001
|
Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 1: Outlet connections (ISO 10692-1:2001) |
EN ISO 17078-3:2009
|
Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009) |
EN 14616:2004
|
Thermal spraying - Recommendations for thermal spraying |
EN ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
EN 4700-005:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
EN 16668:2016+A1:2018
|
Industrial valves - Requirements and testing for metallic valves as pressure accessories |
EN ISO 5182:2016
|
RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
EN 969:2009
|
Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods |
EN 12020-1:2008
|
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
EN 1564:2011
|
Founding - Ausferritic spheroidal graphite cast irons |
EN 16451:2015
|
Railway applications - Braking - Brake pad holder |
EN ISO 11120:2015
|
Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015) |
EN 16602-70-46:2014
|
Space product assurance - Requirements for manufacturing and procurement of threaded fasteners |
EN 13674-3:2006+A1:2010
|
Railway applications - Track - Rail - Part 3: Check rails |
EN 4700-003:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube |
EN 13604:2013
|
Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
UNI EN 10277-1 : 2008
|
BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
EN ISO 18265:2013
|
Metallic materials - Conversion of hardness values (ISO 18265:2013) |
EN 16124:2011
|
Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
EN ISO 4498:2010
|
Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
EN 13748-1:2004/A1:2005
|
TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL USE |
EN ISO 14310:2008
|
Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008) |
EN ISO 9809-1:2010
|
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa (ISO 9809-1:2010) |
EN 14525:2004
|
Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement |
EN ISO 9809-3:2010
|
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010) |
EN 4700-007:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock |
EN 570:2007
|
Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification |
EN 14121:2009
|
Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications |
EN ISO 3266:2010/A1:2015
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015) |
EN 14200:2004
|
Railway applications - Suspension components - Parabolic springs, steel |
EN ISO 9809-2:2010
|
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2010) |
EN 16725:2016
|
Railway applications - Track - Restoration and repair of manganese crossings |
EN 1559-1:2011
|
Founding - Technical conditions of delivery - Part 1: General |
EN 12842:2012
|
Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
EN 13674-1:2011+A1:2017
|
Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above |
EN 16482:2014
|
Founding - Continuous cast iron bars |
EN 598:2007+A1:2009
|
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
EN ISO 16070:2005
|
Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
EN 13674-2:2006+A1:2010
|
Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
EN 303-1:2017
|
Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking |
EN 15566:2016
|
Railway applications - Railway rolling stock - Draw gear and screw coupling |
EN ISO 14998:2013
|
Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) |
EN 16079:2011
|
Founding - Compacted (vermicular) graphite cast irons |
EN ISO 9170-2:2008
|
Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008) |
EN ISO 17078-4:2010
|
Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010) |
EN ISO 15136-2:2006
|
Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
EN 14730-1:2017
|
Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
EN ISO 3506-3:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
EN 4700-004:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
EN 4700-001:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip |
EN ISO 13625:2002
|
Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002) |
EN ISO 5470-1:2016
|
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
EN ISO 898-5:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
EN 4700-006:2010
|
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
EN 16273:2014
|
Railway applications - Track - Forged rail transitions |
ISO 6305-2:2007
|
Railway components — Technical delivery requirements — Part 2: Non-alloy carbon steel baseplates |
I.S. EN 13310:2015
|
KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
BS ISO 4384-2:2011
|
Plain bearings. Hardness testing of bearing metals Solid materials |
PREN 10253-2 : DRAFT 2017
|
BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
03/301625 DC : DRAFT JAN 2003
|
BS EN ISO 10424-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 1: SPECIFICATION FOR ROTARY DRILLING EQUIPMENT |
13/30252124 DC : 0
|
BS ISO 13521 - AUSTENITIC MANGANESE STEEL CASTINGS |
UNI EN ISO 9015-1 : 2011
|
DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
DIN 17750:2002-09
|
Wrought nickel and nickel alloys sheet, plate and strip - Requirements and testing |
I.S. EN 10208-1:2009
|
STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
I.S. EN ISO 19054:2006
|
RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005) |
04/300984 DC : DRAFT JAN 2004
|
BS ISO 4955 - HEAT-RESISTING STEELS |
UNE-EN 15566:2017
|
Railway applications - Railway rolling stock - Draw gear and screw coupling |
UNE-EN 16725:2017
|
Railway applications - Track - Restoration and repair of manganese crossings |
ISO 13533:2001
|
Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
10/30237498 DC : DRAFT DEC 2010
|
BS ISO 4384-1 - PLAIN BEARINGS - HARDNESS TESTING OF BEARING METALS - PART 1: MULTILAYER BEARINGS MATERIALS |
08/30146353 DC : DRAFT MAR 2008
|
BS EN ISO 17078-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
14/30292479 DC : 0
|
BS EN 13230-3 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS |
GOST R ISO 7206-10 : 2005
|
IMPLANTS FOR SURGERY - PARTIAL AND TOTAL HIP-JOINT PROSTHESES - PART 10: DETERMINATION OF RESISTANCE TO STATIC LOAD OF MODULAR FEMORAL HEADS |
PREN 1563 : DRAFT 2015
|
FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
04/100677 DC : DRAFT JAN 2004
|
ISO 16220 - MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOY INGOTS AND CASTINGS |
BS ISO 24338:2014
|
Laminate floor coverings. Determination of abrasion resistance |
09/30185187 DC : 0
|
BS ISO 7186 - DUCTILE IRON PRODUCTS FOR SEWAGE APPLICATIONS |
API 16A CHINESE : 2004
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
09/30196126 DC : 0
|
BS ISO 11118 - GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS |
UNE-EN 16079:2012
|
Founding - Compacted (vermicular) graphite cast irons |
I.S. EN ISO 898-2:2012
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
I.S. EN 4700-003:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
PREN 10088-3 : DRAFT 2011
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
11/30254171 DC : 0
|
BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
DIN EN ISO 9170-2:2009-09
|
TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
DIN ISO 4498 E : 2005
|
SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
BS ISO 11891:2012
|
Hot formed helical compression springs. Technical specifications |
BS ISO 20703:2006
|
Gas cylinders. Refillable welded aluminium-alloy cylinders. Design, construction and testing |
BS EN ISO 17945:2015
|
Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
03/311760 DC : DRAFT JULY 2003
|
ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
ISO 683-14:2004
|
Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs |
BS EN 4700-007:2010
|
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock |
ONORM EN ISO 7866 : 2014
|
GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012 + COR 1:2014) |
DIN EN ISO 17945:2015-08
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
BS EN 1563:2011
|
Founding. Spheroidal graphite cast irons |
04/30076765 DC : DRAFT MAR 2004
|
BS ISO 24338 - LAMINATE FLOOR COVERINGS - DETERMINATION OF ABRASION RESISTANCE |
DIN EN 16451 E : 2015
|
RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
DIN ISO 4384-2:2014-07
|
PLAIN BEARINGS - HARDNESS TESTING OF BEARING METALS - PART 2: SOLID MATERIALS (ISO 4384-2:2011 |
DIN EN ISO 9809-2:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
16/30344411 DC : 0
|
BS EN 14157 - NATURAL STONE TEST METHODS - DETERMINATION OF THE ABRASION RESISTANCE |
09/30143423 DC : DRAFT MAY 2009
|
BS EN ISO 11120 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN CONSTRUCTION AND TESTING |
DIN EN 13674-2:2016-05 (Draft)
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
BS EN ISO 9170-1:2008
|
Terminal units for medical gas pipeline systems Terminal units for use with compressed medical gases and vacuum |
BS ISO 12679 : 2011
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
10/30165712 DC : 0
|
BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD |
15/30315522 DC : 0
|
BS ISO 4586-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
BIS IS 210 : 2009(R2014)
|
GREY IRON CASTINGS - SPECIFICATION |
EN 13605:2013
|
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
BS ISO 6336-5:2016
|
Calculation of load capacity of spur and helical gears Strength and quality of materials |
08/30182457 DC : DRAFT JULY 2008
|
BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
BS ISO 11515 : 2013
|
GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
BS ISO 5182 : 2008
|
RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
BS ISO 2531:2009
|
Ductile iron pipes, fittings, accessories and their joints for water applications |
03/313799 DC : DRAFT AUG 2003
|
ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
17/30348879 DC : 0
|
BS ISO 1083 - SPHEROIDAL GRAPHITE CAST IRONS - CLASSIFICATION |
API 19G2 : 2010
|
FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
EN 13601:2013
|
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
16/30258515 DC : 0
|
BS EN 13674-4 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
API 20A : 2017
|
CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
06/30151815 DC : 0
|
BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS |
05/30132598 DC : DRAFT APR 2005
|
EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS |
04/30046456 DC : DRAFT MARCH 2004
|
ISO 185 - GREY CAST IRON - CLASSIFICATION |
03/118501 DC : DRAFT NOV 2003
|
ISO/DIS 17804 - FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS - CLASSIFICATION |
S.R. CEN/TS 15718:2011
|
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
DIN EN 16482:2014-09
|
FOUNDING - CONTINUOUS CAST IRON BARS |
UNI EN ISO 9809-2 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
EN 12449:2016
|
Copper and copper alloys - Seamless, round tubes for general purposes |
EN 459-2:2010
|
Building lime - Part 2: Test methods |
UNE-EN 15594:2010
|
Railway applications - Track - Restoration of rails by electric arc welding |
API SPEC 19AC : 2016
|
SPECIFICATION FOR COMPLETION ACCESSORIES |
PREN 4700-002 : 200P3
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
ISO 3522:2007
|
Aluminium and aluminium alloys Castings Chemical composition and mechanical properties |
I.S. EN 15594:2009
|
RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
ISO 4586-2:2015
|
High-pressure decorative laminates (HPL, HPDL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties |
I.S. EN 16451:2015
|
RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
BIS IS 1500-3 : 2013
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
UNE-EN 14653-2:2012
|
Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test |
PREN 1559-1 : DRAFT 2009
|
FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
I.S. EN 16668:2016
|
INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
ISO 16112:2017
|
Compacted (vermicular) graphite cast irons — Classification |
ISO 7689:2008
|
Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa Procurement specification |
I.S. EN 4700-004:2010
|
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
ONORM EN 303-5 : 2012
|
HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
17/30359853 DC : 0
|
BS EN 17142 - MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
16/30258472 DC : 0
|
BS EN 14811 - RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
17/30353548 DC : 0
|
BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
UNI EN 10088-4 : 2009
|
STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
17/30362692 DC : 0
|
BS EN 598 - COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS |
ASTM F 3184 : 2016
|
Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
UNE-EN 14917:2011
|
Metal bellows expansion joints for pressure applications |
ASTM A 1058 : 2014 : REDLINE
|
Standard Test Methods for Mechanical Testing of Steel Products—Metric |
ASTM F 3318 : 2018
|
Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
I.S. EN ISO 11961:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
ISO 185:2005
|
Grey cast irons Classification |
ONORM EN 13674-2 : 2012
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
DIN EN 1561:2012-01
|
Founding - Grey cast irons; German version EN 1561:2011 |
I.S. EN 10088-4:2009
|
STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
I.S. EN 10083-3:2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
UNE-EN 13310:2016
|
Kitchen sinks - Functional requirements and test methods |
EN ISO 17078-2:2007/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
ONORM EN ISO 9809-1 : 2010
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
EN ISO 13533:2001/AC:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
EN ISO 17078-1:2004/A1:2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
ISO 3506-3:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
DIN EN 13674-3:2010-12
|
Railway applications - Track - Rail - Part 3: Check rails (includes Amendment A1:2010) |
DIN EN 13601:2013-09
|
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
DIN EN 12020-1:2008-06
|
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
DIN EN 14354 E : 2017
|
WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
DIN EN ISO 19054 E : 2017
|
RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005 + AMD1:2016) |
DIN EN 10083-1 E : 2006
|
STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
DIN EN 13600:2013-09
|
Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2013 |
DIN EN 1337-6 E : 2004
|
STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
CSA B51 : 2014
|
BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
BS EN 10297-1:2003
|
Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes |
BS EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
BS EN 10208-1:2009
|
Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class A |
UNE-EN ISO 5470-1:2017
|
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
BS EN 10088-2:2014
|
Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
ISO 10424-1:2004
|
Petroleum and natural gas industries Rotary drilling equipment Part 1: Rotary drill stem elements |
ISO 13628-10:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
ISO 11439:2013
|
Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
UNE-EN 1561:2012
|
Founding - Grey cast irons |
BS EN 12811-3:2002
|
Temporary works equipment Load testing |
BS EN ISO 6506-3:2014
|
Metallic materials. Brinell hardness test Calibration of reference blocks |
BS EN 1337-4:2004
|
Structural bearings Roller bearings |
BS EN 12842:2012
|
Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods |
BS EN ISO 13533:2002
|
Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
BS EN ISO 18265:2013
|
Metallic materials. Conversion of hardness values |
UNE-EN 303-5:2013
|
Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
BS EN 14121:2009
|
Aluminium and aluminium alloys. Sheet, strip and plate for electrotechnical applications |
BS EN ISO 13625:2002
|
Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings |
BS EN 570:2007
|
Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specification |
BS EN 10277-1:2008
|
Bright steel products. Technical delivery conditions General |
BS EN 303-1:2017
|
Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking |
BS EN ISO 898-5:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread |
DIN EN 14772:2005-04
|
Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
EN 10084:2008
|
Case hardening steels - Technical delivery conditions |
DIN EN ISO 10692-1:2003-04
|
GAS CYLINDERS - GAS CYLINDER VALVE CONNECTIONS FOR USE IN THE MICROELECTRONIC INDUSTRY - PART 1: OUTLET CONNECTIONS |
UNI EN ISO 11439 : 2013
|
GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES |
DIN EN 14525:2005-02
|
Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
EN 60439-5:2006
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
EN 61439-5:2015/AC:2015
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS (IEC 61439-5:2014) |
EN 12811-3:2002
|
Temporary works equipment - Part 3: Load testing |
EN 10088-5:2009
|
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
EN 10208-2:2009
|
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
I.S. EN ISO 17078-1:2005
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
EN 10349:2009
|
Steel castings - Austenitic manganese steel castings |
DIN EN 14121:2009-09
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
DIN EN 545:2011-09
|
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
DIN EN 13674-2:2011-01
|
RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
DIN EN 570:2007-04
|
Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification |
I.S. EN ISO 13533:2002
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
DIN EN 14730-1:2010-12
|
RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
DIN EN 14359:2017-09
|
GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
DIN EN ISO 898-2:2012-08
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
DIN EN 14354:2017-11
|
WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
ONORM EN 1561 : 2011
|
FOUNDING - GREY CAST IRONS |
UNE-EN 13674-2:2007
|
Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
ONORM EN ISO 683-17 : 2015
|
HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
UNE-EN 13674-3:2007
|
Railway applications - Track - Rail - Part 3: Check rails |
ONORM EN 15185 : 2011
|
FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |