FED-STD-183 Revision C:1980
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CONTINUOUS IDENTIFICATION MARKING OF IRON AND STEEL PRODUCTS
01-08-2005
1. SCOPE
2. DEFINITIONS AND MARKING TERMS
3. MARKING REQUIREMENTS
4. INTENDED USE
5. CHANGES
6. CONFLICT WITH REFERENCED SPECIFICATION
Describes the uniform physical item identification marking of constantly recurring symbols for selected iron and steel products which are procured and issued for Government agencies.
Committee |
FSC 4710
|
DevelopmentNote |
C NOTICE 1 - Notice of Change C NOTICE 2 - Notice of Cancellation/Superseded by SAE AMS STD 183 (12/2003) C NOTICE 3 - Notice of Cancellation/Superseded by SAE AMS 2806 and SAE AMS 2807. (08/2005)
|
DocumentType |
Standard
|
Pages |
9
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
SAE AMS 3274 : 2011 | Similar to |
SAE AMS 2807B : 2012 | Similar to |
SAE AMS STD 183 : 1998 | Similar to |
SAE AMS 3270 : 2011 | Similar to |
ASTM A 135 : 2005 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
MIL-S-6758 Revision B:1993 | STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
MIL-S-62470 Base Document:1983 | STEEL, CHROME NICKEL MOLYBDENUM, 8620 BARS, FORGING AND TUBING BEARING QUALITY, VACUUM DEGASSED |
ASTM A 749/A749M : 2014 : REDLINE | Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
DOD-F-24669 Base Document:1986 | FORGINGS AND FORGING STOCK, STEEL BARS, BILLETS AND BLOOMS, GENERAL SPECIFICATION FOR (METRIC) |
MIL-S-8559 Revision A:1965 | STEEL BARS, CARBON, AISI [1095] AIRCRAFT QUALITY |
MIL-S-8844 Revision D:1987 | STEEL BAR, REFORGING STOCK AND MECHANICAL TUBING LOW ALLOY PREMIUM QUALITY |
MIL-P-24691 Base Document:1987 | PIPE AND TUBE, CARBON, ALLOY AND STAINLESS STEEL, SEAMLESS AND WELDED, GENERAL SPECIFICATION FOR |
MIL-T-16286 Revision E:1977 | TUBE, STEEL, SEAMLESS, MARINE BOILER APPLICATION |
ASTM A 999/A999M : 2018 : REDLINE | Standard Specification for General Requirements for Alloy and Stainless Steel Pipe |
ASTM A 135/A135M : 2009 : R2014 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
ASTM A 29/A29M : 2016 : REDLINE | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
ASTM A 600 : 1992 : REV A : R2010 | Standard Specification for Tool Steel High Speed |
SAE AMS S 6098 : 1999 | STEEL, CHROME-NICKEL-MOLYBDENUM (8735) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
MIL-S-83030 Revision A:1968 | STEEL ALLOY, CARBURIZING, BARS AND BILLETS, STEEL NICKEL-CHROMIUM (3310, 3316, AND 9310), PREMIUM QUALITY |
MS52083 Base Document:1985 | BAR, SQUARE, TOOL STEEL, TYPE W1 |
MIL-S-8967 Base Document:1968 | STEEL BAR, WIRE, FORGING STOCK, FORGINGS, MECHANICAL TUBING [431] QUALITY |
MIL T 17188 : D | TUBE, CARBON STEEL, ELECTRIC RESISTANCE WELDED, MARINE BOILER |
ASTM A 500/A500M : 2018 : REDLINE | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
ASTM A 600 : 1992 : REV A : R2016 | Standard Specification for Tool Steel High Speed |
ASTM A 135/A135M : 2009 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
ASTM A 686 : 1992 : R2004 | Standard Specification for Tool Steel, Carbon |
ASTM A 681 : 2008 : R2015 | Standard Specification for Tool Steels Alloy |
SAE AMS S 6758 : 2017 | STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
MS52081 Base Document:1985 | BAR, FLAT, TOOL STEEL, TYPE W1 |
ASTM A 500 : 2003 | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
MIL-T-5695 Revision D:1973 | TUBING, STEEL, CORROSION-RESISTANT (304), COLD DRAWN |
MIL-S-7720 Revision A:1967 | STEEL, CORROSION RESISTANT [18.8] BARS, WIRE AND FORGING STOCK [AIRCRAFT QUALITY] |
MIL S 8955 : 0 | STEEL PLATE, SHEET AND STRIP PH 15-7 MO CORROSION RESISTANT, PRECIPITATION HARDENING |
ASTM A 684/A684M : 2017 : REDLINE | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled |
MIL-A-26107 Revision D:1960 | AIR CONDITIONER, TRAILER-MOUNTED, FREON CYCLE, 11-1/2 TON REFRIGERATING CAPACITY, TYPE MA-3 |
ASTM A 1085/A1085M : 2015 : REDLINE | Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) |
MIL-T-8606 Revision C:1973 | TUBING, STEEL, CORROSION RESISTANT (18-8 STABILIZED AND EXTRA LOW CARBON) |
MIL-S-980 Revision B:1965 | Steel, Chromium Alloy, Bars (for Torpedo Gyroscope Bearings) |
MIL-S-24093 Revision A:1991 | STEEL FORGINGS, CARBON AND ALLOY HEAT TREATED |
MIL-S-16598 Revision B:1970 | Steel Bar (Low Expansion, Free Cutting, 36 Percent Nickel). |
NASA KSC SPEC Z 0001 : 1975 | SPECIFICATION FOR PIPE, 36% NICKEL, IRON-BASE (INVAR 36) |
MS52082 Base Document:1985 | BAR, FLAT, TOOL STEEL, TYPE W2 |
MIL S 3039 : C | STEEL, STRAP, HIGH CARBON, SPHEROIDIZED ANNEALED [FOR AMMUNITION CARTRIDGE CLIPS] |
MIL-S-6049 Revision A:1967 | STEEL, CHROME NICKEL MOLYBDENUM [8740] BARS, RODS AND FORGING STOCK FOR AIRCRAFT APPLICATION |
MIL T 6735 : A | TUBING, CHROME-MOLYBDENUM, 4135 STEEL, SEAMLESS AIRCRAFT QUALITY |
MIL-T-6845 Revision D:1985 | TUBING, STEEL, CORROSION-RESISTANT (304) AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8 HARD CONDITION |
NASA KSC SPEC Z 0007 : 1994 | TUBING, STEEL, CORROSION RESISTANT TYPES 304 AND 316, SEAMLESS, ANNEALED, SPECIFICATION FOR |
MIL-T-8808 Revision B:1981 | TUBING, STEEL, CORROSION RESISTANT (18.8 STABILIZED) AIRCRAFT HYDRAULIC QUALITY |
SAE AMS QQ S 763D : 2013(S2015) | STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS |
ASTM A 530/A530M : 2012-06 | SPECIFICATION FOR GENERAL REQUIREMENTS FOR SPECIALIZED CARBON AND ALLOY STEEL PIPE |
ASTM A 686 : 1992 : R2016 | Standard Specification for Tool Steel, Carbon |
ASTM A 600 : 1992 : REV A : R1999 | Standard Specification for Tool Steel High Speed |
SAE AMS T 5066 : 2015 | TUBING, CARBON STEEL (1025), (AIRCRAFT QUALITY) |
QQ-T-580 Revision C:1977 | TOOL STEEL, CARBON AND CARBON VANADIUM |
QQ-T-570 Revision C:1977 | TOOL STEEL, ALLOY |
MIL S 18728 : D | STEEL PLATE, SHEET, AND STRIP, ALLOY, 8630, AIRCRAFT QUALITY |
MIL-S-8840 Revision B:1965 | STEEL SHEET AND STRIP, CORROSION RESISTANT, PRECIPITATION HARDENING [AM 350 AND AM 355] PREMIUM QUALITY |
WW-P-404 Revision D:1973 | PIPE, STEEL (SEAMLESS & WELDED, BLACK & ZINC COATED) (GALVANIZED) |
MS52084 Base Document:1985 | BAR, SQUARE, TOOL STEEL, TYPE W2 |
MS52077 Base Document:1985 | BAR, OCTAGON, TOOL STEEL, TYPE S1 |
MIL-S-6050 Revision A:1967 | Steel, Chrome-Nickel-Molybdenum (8630) Bars and Reforging Stock (Aircraft Quality) |
MIL-S-5000 Revision E:1982 | STEEL, CHROME-NICKEL-MOLYBDENUM (4340) BARS AND REFORGING STOCK |
MIL P 1144 : D NOTICE 1 | PIPE, CORROSION RESISTANT, STAINLESS STEEL, SEAMLESS OR WELDED |
MIL-S-8503 Revision B:1978 | STEEL BARS, CHROME-VANADIUM (6150) AIRCRAFT QUALITY |
ASTM A 681:2008 | Standard Specification for Tool Steels Alloy |
MIL-N-62418 Base Document:1992 | NICKEL BASE ALLOY, SHEET & PLATE CORROSION & HEAT RESISTANT, SOLUTION HEAT TREATED (HAYNES 230) (METRIC) |
MIL-S-6098 Revision A:1967 | STEEL, CHROME-NICKEL-MOLYBDENUM [8735] BARS AND REFORGING STOCK [AIRCRAFT] |
MIL-S-18729 Revision C:1965 | STEEL PLATE, SHEET, AND STRIP, ALLOY, 4130, AIRCRAFT QUALITY |
MIL-S-5626 Revision C:1968 | STEEL, CHROME MOLYBDENUM [4140] BARS, RODS, AND FORGING STOCK FOR AIRCRAFT APPLICATION |
MS52085 Base Document:1985 | BAR HEXAGON TOOL STEEL TYPE W1 |
MIL-T-8887 Base Document:1987 | TUBING, STEEL, CORROSION RESISTANT, HEAT RESISTANT, STABILIZED, WELDED THIN WALL [ASG] |
SAE AMS S 6050 : 1998 | STEEL, CHROME-NICKEL-MOLYBDENUM (8630) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
ASTM A 686 : 1992 : R1999 | Standard Specification for Tool Steel, Carbon |
ASTM A 600 : 1992 : REV A : R2004 | Standard Specification for Tool Steel High Speed |
ASTM A 682/A682M : 2005 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For (Withdrawn 2009) |
MIL-T-16343 Revision C:1968 | TUBING, STEEL, CARBON, STRUCTURAL |
MIL-S-8690 Revision B:1978 | STEEL, CHROME NICKEL MOLYBDENUM 8620, BARS AIRCRAFT QUALITY |
ASTM A 500 : 2003 : REV A | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES AND FORGINGS; CORROSION RESISTANT |
MIL-T-6736 Revision B:1965 | TUBING, CHROME MOLYBDENUM 4130 STEEL, SEAMLESS, AIRCRAFT QUALITY [ASG] |
MIL-S-6709 Revision A:1965 | STEEL, CHROME-MOLYBDENUM-ALUMINUM; BARS, RODS, BILLETS AND FORGING STOCK (FOR NITRIDING) (AIRCRAFT QUALITY) |
ASTM A 686 : 1992 : R2010 | Standard Specification for Tool Steel, Carbon |
MIL-S-83135 Base Document:1968 | STEEL BARS, REFORGING STOCK, AND MECHANICAL TUBING, 4340M, HIGH QUALITY |
MIL-S-18732 Revision D:1968 | Steel Bars, Wire, Forging Stock, Forgings Tubing (431), Special Quality |
ASTM A 1085 : 2013 | Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) |
MS52080 Base Document:1985 | BAR, ROUND, TOOL STEEL, TYPE W2 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.