FED-STD-601 Base Document:1955
Current
Current
The latest, up-to-date edition.
RUBBER, SAMPLING AND TESTING
Available format(s)
PDF
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.Outlines chemical and physical tests generally used for natural and synthetic rubber products to comply with Federal specification requirements
| Committee |
FSC 9320
|
| DevelopmentNote |
NOTICE 1 - Notice of Change. NOTICE 2 - Notice of Change. NOTICE 3 - Notice of Change. NOTICE 4 - Notice of Change. NOTICE 5 - Notice of Change. NOTICE 6 - Notice of Change. NOTICE 7 - Notice of Change. (02/2004) NOTICE 8 - Notice of Inactivation for New Design. (05/2013)
|
| DocumentType |
Standard
|
| Pages |
440
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| SAE AMS L P 390 : 2000 | PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) |
| MIL-S-36662 Base Document:1970 | STOPPER, BOTTLE WHITE RUBBER |
| ZZ E 00661 : F (1) NOTICE 2 | ERASERS, RUBBER AND RUBBER SUBSTITUTE |
| MIL G 12223 : J | GLOVES, TOXICOLOGICAL AGENTS PROTECTIVE |
| ZZ-H-500 Revision C:1987 | HOSE, RUBBER, AND HOSE ASSEMBLIES, RUBBER, PNEUMATIC (YARN OR FABRIC REINFORCED) |
| MIL-F-0010117 Revision B:1969 | FACEPIECE, COMBAT M9 |
| MIL P 5516 : C | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160 DEGREES F |
| MIL T 5578 : C | TANK, FUEL, AIRCRAFT, SELF-SEALING |
| MIL T 14398 : J | TANK, FABRIC, COLLAPSIBLE, WATER, NYLON, RUBBER-COATED |
| MIL B 0043154 : L | BOOTS, HOT WEATHER |
| O-R-1151 Revision B:1969 | REGENERATOR, LITHOGRAPHIC BLANKET |
| MIL-G-21569 Revision B:1965 | GASKET, CYLINDER LINER SEAL, SYNTHETIC RUBBER |
| MIL-A-17161 Revision D:1985 | ABSORBER, RADIO FREQUENCY RADIATION (MICROWAVE ABSORBING MATERIAL), GENERAL SPECIFICATION FOR |
| MIL T 6396 : E | TANKS, AIRCRAFT PROPULSION FLUID SYSTEM, INTERNAL REMOVABLE, NON-SELF-SEALING |
| MIL-T-53048 Revision C:1991 | TANK, FABRIC, COLLAPSIBLE; AIR COLUMN SUPPORTED, OPEN TOP, WATER STORAGE 3000 GALLONS |
| MIL-B-52472 Revision C:1987 | BAG SAND POLYPROPYLENE |
| MIL-G-53042 Base Document:1984 | GUM PREVENTIVE COMPOUND, GASOLINE |
| MIL C 17 : G | CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR |
| MIL-B-2885 Revision F:1987 | BOOTS, FIREMEN'S |
| MIL-O-51401 Base Document:1974 | OVERBOOT, PLASTIC FILM |
| MIL-B-49436 Revision B:1993 | BATTERIES, RECHARGEABLE, NICKEL CADMIUM, SEALED |
| MIL-B-53081 Base Document:1988 | BERM LINER ASSEMBLIES |
| MIL-H-24520 Base Document:1975 | MILITARY SPECIFICATION - HOSE AND HOSE ASSEMBLY FOR WATER COOLING OF ELECTRONIC EQUIPMENT |
| MIL-B-28617 Revision C:1977 | BOOMS, FLOATING BARRIER, OIL (FOR HARBOR USE) |
| MIL-C-44187 Revision C:1993 | CLOTH, LAMINATED, WATERPROOF AND MOISTURE VAPOR PERMEABLE |
| MIL-C-87972 Revision A:1987 | CASTERS, RIGID AND SWIVEL, GENERAL SPECIFICATION FOR |
| MIL R 1229 : C | RUBBER SHEET PACKING, SOLID, WIRE CLOTH INSERTED, SYMBOL, 2354 |
| MIL H 27516 : D | HOSE AND HOSE ASSEMBLY, NON-METALLIC, SUCTION AND DISCHARGE |
| MIL R 82635 : 0 | RUBBER SHEET, BUTYL, UNVULCANIZED |
| MIL-C-43708 Revision B:1986 | CLOTH, COATED OR CLOTH, LAMINATED, REFLECTIVE |
| MIL-S-21923 Base Document:1959 | SYNTHETIC RUBBER COMPOUND, BUTADIENE STYRENE TYPE, OZONE RESISTANT, FOR LOW TEMPERATURE SERVICE |
| MIL-R-82844 Base Document:1990 | RUBBER, POLYISOPRENE (NON-ASBESTOS) |
| MIL-C-21850 Revision C:1979 | COVERALLS, CATAPULT, CREWMEN'S |
| MIL-G-87066 Revision A:1988 | GLOVES, CHEMICAL AND OIL PROTECTIVE |
| MIL T 24487 : A | TILE, RUBBER VIBRATION DAMPING, TYPE MIRL NO. 3 |
| MIL-P-0037564 Revision A:1978 | PLUG, EAR, HEARING PROTECTION UNIVERSAL SIZE WITH HEADBAND |
| MIL H 28693 : 0 | HOSE, RUBBER, OIL & GASOLINE DISCHARGE, SMOOTH BORE, LIGHTWEIGHT BUOYANT TYPE, LONGITUDINALLY REINFORCED, 6 INCH |
| MIL-B-53067 Base Document:1987 | BOAT, RECONNAISSANCE/LANDING ASSAULT, INFLATABLE: 3-, 7-, 15-PERSON |
| MIL-C-5499 Revision B:1984 | CORE, AIRCRAFT, HIGH PRESSURE AIR VALVE |
| MIL-B-45326 Revision C:1989 | BOOT, DUST AND MOISTURE SEAL: HYDRAULIC BRAKE CYLINDER, SYNTHETIC RUBBER |
| MIL D 24613 : 0 | DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC |
| MIL-C-23092 Revision B:1976 | CEMENT, NATURAL RUBBER, MAGNETIC MINESWEEPING CABLE REPAIR |
| MIL A 25457 : B NOTICE 1 | ADHESIVE, AIR DRYING, SILICONE RUBBER |
| JJ-B-191 Revision A:1967 | BELTING, FLAT, CONVEYOR OR POWER TRANSMISSION, COTTON (SOLID WOVEN) |
| L-C-001369 Base Document:1969 | CUSHION, CARPET AND RUG, BONDED URETHANE |
| MIL-H-2217 Revision D:1993 | HOSE ASSEMBLIES, WIRE REINFORCED SYNTHETIC RUBBER, SUBMARINE RESCUE CHAMBER |
| ZZ-G-710 Revision B:1993 | GASKET MATERIAL, RUBBER 35 DUROMETER HARDNESS |
| MIL-HDBK-1857 Base Document:1998 | Grounding, Bonding and Shielding Design Practices |
| MIL-DTL-81581-8 Revision A:2006 | HOSE ASSEMBLIES, CABLE ASSEMBLIES, COMMUNICATION, ASSOCIATED |
| MIL-C-4751 Revision D:1983 | CASTERS, RIGID AND SWIVEL, PRECISION HEAVY DUTY, AND SHOCK ABSORBING |
| GG S 001090 : A | SUCTION AND PRESSURE APPARATUS, SURGICAL, EXPLOSION-PROOF, SINGLE COMPRESSOR, MOBILE, 110 VOLT, 60 CYCLE, AC: (FOR EAR, NOSE AND THROAT PROCEDURES) |
| GG-S-00795 Revision B:1990 | SUCTION AND PRESSURE APPARATUS, SURGICAL, EXPLOSION-PROOF, DOUBLE COMPRESSOR, MOBILE, 115 VOLT; 60 CYCLE, AC (WITH ETHER VAPORIZER) |
| MIL-S-36908 Revision A:1976 | SHAKING MACHINE, LABORATORY, SINGLE CUP, 115 VOLT, 50-60 HZ, AC |
| MIL-DTL-5578 Revision D:2008 | TANKS, FUEL, AIRCRAFT, SELF-SEALING |
| MIL-T-53101 Base Document:1990 | TANKS, FABRIC, COLLAPSIBLE, 3000, 10,000 & 20,000 GALLON, PETROLEUM, LOW TEMPERATURE |
| MIL-DTL-1716 Revision J:1997 | POLE, TENT, TELESCOPIC, ADJUSTABLE 5 FEET TO 9 FEET, MAGNESIUM |
| MIL F 8789 : D | FITTING END, ATTACHABLE HYDRAULIC, HIGH PRESSURE HOSE |
| MIL-DTL-43415 Revision D:2003 | CAP, SERVICE, MILITARY POLICE, WHITE |
| MIL-S-83318 Revision A:1991 | SEALING COMPOUND, LOW TEMPERATURE CURING, QUICK REPAIR, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES |
| MIL-S-8802 Revision F:1990 | SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH ADHESION |
| MIL-C-2181 Revision M:1990 | COVERALLS, TOXICOLOGICAL AGENTS PROTECTIVE M 3 |
| MIL-D-17650 Revision B:1988 | DISK, VALVE, RUBBER, INSERT TYPE |
| MIL-M-87113 Revision A:1993 | MASK, OXYGEN, MBU-10/P |
| MIL-B-44152 Revision C:1993 | BOOTS, COMBAT; MILDEW AND WATER RESISTANT, DMS |
| MIL-M-19417 Revision D:1992 | Mask Assemblies, Oxygen and Smoke, Full Face |
| MIL-B-43739 Revision A:1987 | BOOT, SKI-MOUNTAIN |
| MIL C 12189 : H | CLOTH, COATED: BUTYL COATED, TOXICOLOGICAL AGENTS PROTECTIVE |
| TT-S-735 Revision A:1988 | STANDARD TEST FLUIDS, HYDROCARBON |
| MIL H 83796 : 0 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL C 43473 : F | CLOTH, COATED, NYLON, POLYURETHANE COATED |
| MIL P 81716 : 0 | PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE II HYDRAULIC (MINUS 65 DEG F TO PLUS 275 DEG F) |
| MIL-DTL-81716 Revision A:2009 | PACKING, PREFORMED, STRAIGHT THREADED TUBE FITTING BOSS, TYPE 2 HYDRAULIC (-65 DEGREES F TO +275 DEGREES F) |
| MIL D 24709 : 0 | DISTRIBUTED ISOLATION MATERIAL TYPE R-50-21/64 |
| MIL-B-43154 Revision M:1992 | BOOTS, HOT WEATHER |
| MIL-B-53083 Base Document:1988 | BAG, WATERPROOF, LOAD CARRYING; SPECIAL OPERATIONS WATERPROOF BAG (SOWB) |
| MIL H 17902 : F | HOSE, END FITTINGS AND HOSE ASSEMBLIES, SYNTHETIC RUBBER, AIRCRAFT FUELS |
| MIL V 24258 : 0 | VALVE, CHECK, INHALATION AND EXHALATION, FOR UNDERWATER BREATHING APPARATUS (SCUBA) |
| MIL J 2829 : E | JOINT SEALING PACKING |
| MIL C 0050072 : E | COVER, VOICEMITTER-OUTLET VALVE, C13 |
| MIL-C-6100 Revision A:1973 | CONNECTOR, RECEPTACLE, ELECTRICAL, AIRCRAFT |
| MIL M 19379 : B | MOUNT, RESILIENT, MARE ISLAND TYPES 11M15, 11M25,AND 10M50 |
| MIL-F-52236 Base Document:1962 | FILTER ELEMENT, AIR, DIVER S, POLYURETHANE FOAM |
| GG-I-00552 Base Document:1964 | |
| MIL-H-43088 Revision E:1984 | HOOD, ROCKET FUEL HANDLERS: IMPERMEABLE, FULL PROTECTION |
| MIL-C-15104 Revision F:1991 | Cloth, Coated, Flame Resistant, Berth and Bedding Cover (No S/S Document) |
| NNN-T-001293 Base Document:1996 | TUBE BLOOD COLLECTING VACUUM NONSTERILE |
| MIL-PRF-51483 Revision A:2011 | Edgeseal Material, Self-Adhering |
| MIL-DTL-32066 Base Document:2000 | GLOVES, RUBBER, INDUSTRIAL |
| MIL H 6615 : E | HOSE ASSEMBLIES, RUBBER, FUEL AND WATER, WITH DETACHABLE COUPLINGS, LOW TEMPERATURE |
| MIL C 28927 : LATEST | CLOTH, TAFFETA, NYLON: POLYURETHANE COATED |
| MIL H 81581/8 : 0 | HOSE ASSEMBLIES, CABLE ASSEMBLIES, COMMUNICATION, ASSOCIATED |
| MIL-D-3134 Revision J:1988 | DECK COVERING MATERIALS |
| MIL-R-2778 Revision B:1965 | RUBBER SHEET, SOLID, UNVULCANIZED, HIGH GRAPHITE, GASKET USE SYMBOL 2352 |
| A-A-50362 Revision B:2000 | OVERSHOES, MEN'S, RUBBER, 5 BUCKLE TYPE |
| DOD-STD-35-36 Revision B:1979 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING |
| MIL-S-11031 Revision B:1963 | SEALING COMPOUND, ADHESIVE. CURING (POLYSULFIDE BASE) |
| MIL-R-9208 Revision B:1968 | REPAIR MATERIAL, FOR SELF SEALING FUEL TANKS |
| MIL H 5593 : C | HOSE, AIRCRAFT, LOW-PRESSURE, FLEXIBLE |
| MIL-P-48376 Base Document:1976 | PROJECTILE, 155MM, HE, M692 AND M731, NON-METALLIC HARDWARE FOR |
| MIL-M-17522 Revision D:1967 | MASK, PROTECTIVE, ND MARK V |
| MIL C 38271 : B | CONNECTOR, OXYGEN MASK TO REGULATOR CRU-60/P |
| MIL H 13719 : D | HOSE ASSEMBLY, RUBBER, HYDRAULIC BRAKE |
| MIL-C-44263 Base Document:1986 | CLOTH, LAMINATED, WATERPROOF, MOISTURE VAPOR PERMEABLE AND FLAME RESISTANT (WT. 3.4 OZ) |
| MIL-B-53102 Base Document:1990 | BERM LINER ASSEMBLIES, ARCTIC SERVICE |
| MIL-B-50432 Base Document:1969 | BAG, BARRIER, NEOPRENE, FOR USE WITH 152MM CARTRIDGES |
| ZZ-C-450 Revision C:1974 | CLOTH, COATED (RUBBER AND PLASTIC) AND PLASTIC SHEETING FOR HOSPITAL USE |
| MIL-B-44426 Revision B:1995 | Boots, Intermediate Cold/Wet (No S/S Document) |
| MIL-B-16924 Revision C:1972 | BLOOD RECIPIENT SET, INDIRECT TRANSFUSION |
| NFPA 298 : 1994 | FIRE FIGHTING FOAM CHEMICALS FOR CLASS A FUELS IN RURAL, SUBURBAN, AND VEGETATED AREAS |
| MIL-DTL-15562 Revision G:1996 | MATTING OR SHEET, FLOOR COVERING, INSULATING FOR HIGH VOLTAGE APPLICATION |
| MIL-L-38200 Revision B:1966 | LIFE PRESERVER, UNDERARM, ADULT LPU 5/P |
| MIL-C-83982 Base Document:1974 | COMPOUND, SEALING, FLUID RESISTANT |
| L-C-001676 Base Document:1970 | CUSHION, CARPET AND RUG, VIRGIN URETHANE |
| MIL-D-10131 Revision B:0197 | DISC, INLET VALVE |
| MIL-T-37000 Base Document:1973 | TUBE, BLOOD COLLECTING, VACUUM, STERILE |
| MIL-P-51402 Base Document:1975 | PLASTIC SHEET, POLYPROPYLENE POLYETHYLENE LAMINATE FILM |
| MIL-L-24247 Revision C:1990 | LIFE PRESERVER, VEST TYPE, U.S. NAVY, MARK 1 |
| MIL-L-25798 Revision D:1984 | LIFE PRESERVER, UNDERARM, CASUALTY, TYPE MB-1 |
| MIL-DTL-8794 Revision F:2007 | HOSE, SYNTHETIC RUBBER - HYDRAULIC FLUID, FUEL, AND OIL RESISTANT |
| GGG-S-735 Revision B:1976 | STAMPING AND MARKING EQUIPMENT; GENERAL SPECIFICATION FOR |
| WW P 1432 : C | PIPE, STEEL (COAL TAR ENAMEL OR CEMENT MORTAR LINING, AND COAL TAR ENAMEL COATED AND WRAPPED |
| MIL-H-52079 Revision B:1959 | HOSE, PREFORMED, SEMI FLEXIBLE, REINFORCED |
| MIL-M-27274 Revision E:1993 | MASK, OXYGEN MBU-5/P |
| MIL B 82640 : 0 | BOOT ASSEMBLY, TOXIC, INFECTIOUS, OR VESICANT SUBSTANCES, PROTECTIVE |
| MIL H 13531 : C | HOSE, RUBBER AND HOSE ASSEMBLY, RUBBER (HYDRAULIC, FLEXIBLE) |
| MIL-R-46762 Base Document:1963 | RUBBER STOCK, UNVULCANIZED, TRACK SHOES, PADS, AND PIN BUSHINGS |
| MIL H 6000 : B | HOSE, RUBBER [FUEL, OIL, COOLANT, WATER AND ALCOHOL] |
| MIL-DTL-43976 Revision D:2003 | GLOVES AND GLOVE SET, CHEMICAL PROTECTIVE |
| DIN 65213:1988-05 | AEROSPACE; HOSES FOR SLEEVE ATTACHMENT FOR NOMINAL PRESSURES UP TO 35 BAR; TECHNICAL SPECIFICATION |
| GGG-R-00620 Base Document:1965 | ROLLER, HAND (RUBBER ROLLER) |
| MIL-I-46852 Revision C:1991 | INSULATION TAPE, ELECTRICAL, SELF ADHERING UNSUPPORTED SILICONE RUBBER |
| MIL W 3459 : D | WIPER, WINDOW, ELECTRIC, PENDULUM TYPE (MARINE SERVICE, HEAVY DUTY) |
| MIL-D-51048 Revision F:1976 | DECONTAMINATING APPARATUS, PORTABLE, DS2, 1-1/2 QUART, M11 |
| MIL-M-50023 Base Document:1959 | MASK, PROTECTIVE, CD V-805 |
| MIL-PRF-900 Revision F:1973 | RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS |
| MIL-C-53004 Revision B:1989 | CAMOUFLAGE SCREENING SYSTEMS, MODULAR, LIGHTWEIGHT, SYNTHETIC, WOODLAND, DESERT & SNOW |
| MIL H 8795 : D | HOSE ASSEMBLY, RUBBER HYDRAULIC, FUEL AND OIL RESISTANT |
| MIL-C-7474 Revision E:1978 | CASTER, INDUSTRIAL |
| MIL-DTL-83197 Revision B:1996 | Liner, Anti-Exposure, Flying Coveralls CWU-23/P |
| MIL-C-18255 Revision E:1989 | CALKING COMPOUND, SYNTHETIC RUBBER BASE, WOODEN DECK SEAM APPLICATION |
| MIL H 8794 : D | HOSE, RUBBER, HYDRAULIC, FUEL AND OIL RESISTANT |
| MIL C 13777 : G | CABLE, SPECIAL PURPOSE, ELECTRICAL, CONDUCTORS GENERAL SPECIFICATION FOR |
| MIL-B-24692 Revision A:1993 | BREATHING APPARATUS, OXYGEN GENERATING, TYPE A-4 (METRIC) |
| HH-I-553 Revision C:1975 | INSULATION TAPE, ELECTRICAL, (RUBBER, NATURAL AND SYNTHETIC) |
| DOD-P-15817 Revision D:1976 | PARTS, SYNTHETIC RUBBER, FOR USE WITH BATTERIES OR IN BATTERY COMPARTMENTS OF SUBMARINES (METRIC) |
| MIL C 20696 : E | CLOTH, COATED, POLYESTER OR NYLON, WATERPROOF |
| MIL F 14788 : NOTICE 1 | FABRICATED PART, SILICONE RUBBER (FOR USE IN AMMUNITION) |
| MIL-D-19458 Revision A:1964 | DIVER DRESS, SWIM SUIT |
| MIL C 27315 : A | COATING SYSTEMS, ELASTOMERIC, THERMALLY REFLECTIVE AND RAIN EROSION RESISTANT |
| MIL-B-55087 Revision B:1982 | BALLOON, METEROLOGICAL, ML-537()/UM |
| MIL-N-50071 Revision C:1964 | |
| MIL G 82639 : 0 | GLOVE ASSEMBLIES, TOXIC, INFECTIOUS, OR VESICANT SUBSTANCES, PROTECTIVE |
| MIL-R-15058 Revision G:1965 | RUBBER, SHAFT COVERING MATERIALS (FOR MARINE PROPELLOR SHAFTS) |
| MIL-W-5664 Revision D:1987 | WEBBING, TEXTILE, ELASTIC, COTTON |
| MIL-C-43808 Revision A:1983 | CLOTH, COATED, NYLON |
| MIL-C-12423 Revision C:1961 | CABLE, TELEPHONE, WD-33/U |
| MIL-DTL-13777 Revision L:2014 | CABLE, SPECIAL PURPOSE, ELECTRICAL, GENERAL SPECIFICATION FOR |
| MIL-C-81346 Revision B:1973 | COMPOUND, DECK COVERING, NONSLIP, LIGHTWEIGHT FOR ALUMINUM ALLOY LANDING MATS |
| MIL-V-8883 Revision B:1965 | VALVE, INLET, LIFE RAFT |
| MIL-P-17553 Revision A:1976 | PACKING, PREFORMED, O RING, SYNTHETIC RUBBER |
| MIL-A-24179 Revision A:1969 | ADHESIVE, FLEXIBLE UNICELLULAR - PLASTIC THERMAL INSULATION |
| MIL-C-50072 Revision B:1964 | COVER, VOICEMITTER-OUTLET VALVE, C13 |
| MIL-PRF-19769 Revision C:2009 | Gaskets, Synthetic Rubber Oil Resistant, Slide Valve (for 21-Inch Submerged Torpedo Tubes) |
| MIL-DTL-27516 Revision G:2011 | Hose and Hose Assembly, Nonmetallic, Suction and Discharge |
| NFPA 1150 : 2017 | FOAM CHEMICALS FOR FIRES IN CLASS A FUELS |
| SAE AMS 3259 : 1997 | SEALING COMPOUND, POLYTHIOETHER - NONCHROMATED, CORROSION INHIBITING FOR INTERMITTENT USE TO 360 DEGREE F (182 DEGREE C) |
| MIL-P-24333 Base Document:1968 | PLASTIC MATERIAL, UNICELLULAR, SHEET, ELASTOMERIC |
| MIL-DTL-3533 Revision C:2009 | RUBBER, SYNTHETIC; SHEET, STRIP AND MOLDED |
| MIL-D-2921 Revision B:1964 | DISK, RUBBER [CELLULAR HARD] |
| MIL M 24288 : A NOTICE 1 | MATERIAL, PATCHING, FOR DIVER S DRESS |
| GGG-H-33 Revision B:1996 | HAMMER, HAND AND MALLET, SURFACE, PROTECTIVE, HOLDER AND ADAPTER, INSERTED HAMMER FACE, AND FACES, HAMMER, INSERTED |
| MIL-M-6002 Revision A:1982 | MARKING STANDARD HOSE AIRCRAFT |
| MIL-I-46838 Revision B:1981 | INSULATING COMPOUND, ELECTRICAL, SILICONE RUBBER, ROOM TEMPERATURE VULCANIZING |
| MIL H 17505 : E | HOSE AND HOSE ASSEMBLY, RUBBER, OIL AND GASOLINE, SUCTION AND DISCHARGE |
| MIL-B-24911 Base Document:1983 | BOOT, SAFETY, AIRCREW |
| MIL-B-83277 Revision A:1975 | BOOTS, FLYERS FWU-8/P |
| MIL-I-11489 Revision E:1976 | INSECT NET, HEAD |
| MIL-T-13020 Revision C:1971 | TAPE, RUBBER UNVULCANIZED, SPLICING AND MOLDING (TAPES TO-317/U & TL-318/U). |
| GGG-S-001333 Revision A Interim Revision:1975 | SCRAPER AND SQUEEGEE, VEHICLE WINDOW |
| MIL-A-36163 Base Document:1963 | AIRWAY, PHARYNGEAL, RUBBER |
| MIL C 8068 : B | CLOTH, COATED, NYLON, RUBBER-COATED, FUEL RESISTANT |
| MIL-S-51141 Revision A:1967 | SUIT, PROTECTIVE, IMPERMEABLE, SUPPLIED AIR, M4 |
| MIL-C-21109 Revision C:1988 | CLOTH, COATED, NYLON, RAFT BOTTOM, |
| MIL-C-10351 Revision D:1982 | CLOTH, LAMINATED AND COATED FOR WATERPROOF CONTAINERS |
| MIL T 17964 : B NOTICE 1 | TAPE, TEXTILE; NYLON, ELASTIC ONE INCH |
| MIL-C-82403 Base Document:1965 | CABLE, SUBMARINE, POWER, CONTROL AND COMBINATION |
| GG-H-166 Revision B:1958 | |
| HH-G-156 Revision E:1993 | GASKET MATERIAL, GENERAL PURPOSE, RUBBER SHEETS, STRIPS, AND SPECIAL SHAPES |
| MIL-I-19632 Revision B:1960 | INSULATION, ELECTRICAL, DIELECTRIC BARRIER, LAMINATED, PLASTIC FILM AND RAG PAPER |
| MIL-E-23155 Revision C:1986 | ESCAPE, APPLIANCE, HOODED, AIR INFLATABLE, WITH POUCH, SUBMARINE PERSONNEL |
| MIL-H-46354 Revision A:1974 | HEADREST, OPTICAL INSTRUMENT |
| MIL H 26894 : C | HOSE ASSEMBLY, RUBBER, GASOLINE, REFUELING, LOW TEMPERATURE |
| MIL-I-46877 Base Document:1973 | INSULATING COMPOUND, ELECTRICAL |
| MIL-S-38249 Base Document:1964 | SEALING COMPOUND, FIREWALL |
| MIL S 46874 : 0 | SEAL, RF AND PRESSURE |
| MIL-DTL-22777 Revision G:1999 | SOLES AND HEELS, RUBBER TRACTION TREAD FOR FOOTWEAR |
| MIL H 24565 : 0 | HOSE AND FITTINGS, OIL AND TURBINE FUEL, SMOOTH BORE, CORRUGATED COVER, 7 INCH |
| FF-C-88 Revision C:1971 | CASTERS, RIGID AND SWIVEL, INDUSTRIAL DUTY |
| MIL-DTL-22050 Revision E:2004 | Gasket and Packing Material, Rubber, for use with Polar Fluids, Steam, and Air at Moderately High Temperatures |
| ZZ-R-768 Revision B:2009 | RUBBER FOR MOUNTINGS (UNBONDED-SPOOL AND COMPRESSION TYPES) |
| MIL-C-29105 Base Document:1971 | COAT, AMMUNITION CARRYING, BUOYANT, AND BLADDER, FLOTATION |
| MIL S 798 : C | SUPPORTER, ATHLETIC |
| MIL-B-50873 Revision A:1971 | BAG, BARRIER, ELASTOMERIC |
| MIL-E-51223 Base Document:1968 | ENTRANCE, PROTECTIVE, PRESSURIZED, MISSILE VAN, COLLAPSIBLE, M7 |
| MIL-C-23070 Revision B:1972 | CLOTH, LAMINATED, AND TAPE, COATED CLOTH, POLYISOPRENE NATURAL OR SYNTHETIC, RUBBER ON NYLON |
| MIL-C-10113 Revision C:1974 | COVER, OUTLET VALVE (FOR C15 OUTLET VALVE) |
| DOD-P-15816 Revision C:1977 | PARTS, HARD RUBBER, FOR USE WITH SUBMARINE STORAGE BATTERIES (METRIC) |
| AA-C-00288 Revision B:1968 | CHAIRS, FOLDING, WOOD, WITHOUT ARMS |
| MIL-B-44418 Base Document:1991 | Boot Wall, Fabric Assemblies, Standardized Integrated Command Post System (SICPS) (No S/S Document) |
| MIL-T-36966 Revision A:1978 | TUBING, NONMETALLIC, RUBBER |
| MIL-DTL-28693 Revision B:2016 | Hose, Rubber, Oil and Gasoline Discharge, Smooth Bore, Lightweight Buoyant Type, Longitudinally Reinforced, 6 Inch |
| MIL-R-14328 Revision B:1975 | RUBBER SHEET, SYNTHETIC, MEDIUM SOFT, GENERAL-PURPOSE GASKET MATERIAL (FOR EXTREME CLIMATIC CONDITIONS) |
| MIL H 22279 : C | HOSE ASSEMBLIES, RUBBER, AIRCRAFT FUELING, COLLAPSIBLE, BY NEGATIVE PRESSURE |
| MIL-C-8956 Revision A:1970 | CLAMP, LOOP TUBE SUPPORT |
| MIL C 442 : D | CABLE [WIRE] TWO CONDUCTOR PARALLEL |
| MIL G 22050 : D | GASKET & PACKING MATERIAL, RUBBER, FOR USE WITH POLAR FLUIDS, STEAM & AIR AT MODERATELY HIGH TEMPERATURES |
| MIL-P-51104 Revision A:1970 | PROTECTOR, INFANT, M2 |
| MIL-S-38228 Base Document:1964 | SEALING COMPOUND, ENVIRONMENTAL, FOR AIRCRAFT SURFACES |
| CCC-C-1798 Base Document:1972 | CLOTH, COATED COTTON, PLASTIC COATED TICKING |
| MIL-I-85491 Base Document:1981 | INSULATION MATERIAL, POLYISOPRENE |
| L-P-390 Revision C:1971 | PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM AND HIGH DENSITY) |
| MIL-DTL-5516 Revision D:2008 | Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F (71 Degrees C) |
| MIL G 43976 : C | GLOVE & GLOVE SET, CHEMICAL PROTECTIVE |
| MIL-C-13998 Revision H:1982 | CAP, SERVICE, WOOL, ARMY GREEN 44 |
| MIL-C-7966 Revision C:1987 | CLOTH, COATED, RUBBER, NYLON BASE |
| MIL-R-60671 Base Document:1967 | RUBBER, CHLORINATED, NATURAL, POWDER |
| MIL H 7061 : B | HOSE, RUBBER, AIRCRAFT, SELF SEALING, AROMATIC FUEL |
| MIL-S-24340 Revision A:1988 | SEALING COMPOUND, DECK, POLYURETHANE (POLYETHER BASE) |
| MIL-H-43079 Revision F:1988 | Hood, Rocket Fuel Handler\'s: Impermeable, Limited Protection (No S/S Document) |
| MIL C 10799 : H | CLOTH, COATED, COTTON, VINYL COATED, FIRE AND MILDEW RESISTANT |
| MIL C 52938 : 0 | COVER, AIR SUPPORTED, FOR 25,000 BARREL, EMBANKMENT SUPPORTED, FUEL RESERVOIR |
| MIL-C-19654 Base Document:1956 | CABLE, TELEPHONE, SUBMARINE |
| FF-C-82 Revision B:1967 | CASTER, SWIVEL, CHAIR |
| TT-I-600 Revision C:1975 | INKING PAD, RUBBER STAMP |
| MIL-A-36059 Base Document:1961 | APRON, X-RAY PROTECTIVE |
| MIL-S-81732 Base Document:1969 | SEALING COMPOUND, ELECTRICAL, HIGH STRENGTH, ACCELERATOR REQUIRED |
| MIL-T-52943 Base Document:1978 | TANK, FABRIC, COLLAPSIBLE, PILLOW TYPE (FOR POTABLE WATER) |
| MIL-DTL-3885 Revision H:2016 | CABLE ASSEMBLIES AND CORD ASSEMBLIES, ELECTRICAL |
| MIL W 17965 : B NOTICE 1 | WEBBING, TEXTILE; KNITTED, NYLON; ELASTIC; 4 1/4 INCH WIDTH |
| MIL-DTL-44400 Revision A:2000 | TENT, FABRIC ASSEMBLIES, STANDARDIZED INTEGRATED COMMAND POST SYSTEM |
| MIL-C-43062 Revision D:1988 | CLOTH,COATED,COTTON,RESIN MODIFIED BUTYL COATED, ACID AND FUEL RESISTANT |
| MIL L 24047 : A | LIFE PRESERVER, YOKE TYPE, SCUBA, U.S. NAVY MARK 3 |
| MIL-S-43960 Base Document:1977 | SWEAT PANTS, LEG ZIPPER |
| MIL-H-22072 Revision C:1984 | HYDRAULIC FLUID, CATAPULT, NATO CODE NUMBER H-579 |
| FF-C-77 Revision C:1986 | CASTERS, RIGID AND SWIVEL (INSTITUTIONAL DUTY) |
| MIL-S-8784 Revision B:1971 | SEALING COMPOUND, LOW ADHESION, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES |
| MIL G 1149 : C | GASKET MATERIAL, SYNTHETIC RUBBER, 50 AND 65 DUROMETER HARDNESS |
| NFPA 22 : 2018 | WATER TANKS FOR PRIVATE FIRE PROTECTION |
| MIL-N-6748 Revision A:1968 | NIPPLE, ELECTRICAL TERMINAL |
| MIL-R-23074 Revision C:1990 | RUBBER TILE, RUBBER-AIR-LEAD-TYPE (RAL) |
| NNN-F-1486 Revision B:1978 | FILLER, PIPET RUBBER |
| GG T 00750 : A | TUBE, DUODENAL, SURGICAL, REHFUSS |
| MIL R 900 : F | RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS |
| MIL-C-43944 Base Document:1976 | CLOTH, LAMINATED, AND CLOTH, COATED (CHLOROPRENE COATED) |
| MIL-R-21252 Revision B:1987 | Rubber Sheet, Solid, Synthetic, Shipboard Water Evaporator Gasketing |
| ZZ R 710 : A | RUBBER GASKET MATERIAL, 35 DUROMETER HARDNESS |
| MIL-B-23459 Revision D:1988 | BUOY, HOSE SUPPORT, INFLATABLE |
| MIL H 11588 : F | HOSE ASSEMBLY, RUBBER, SYNTHETIC, LIQUID PETROLEUM FUELS, DISPENSING, COLLAPSIBLE |
| DDD-M-001349 Base Document:1967 | MAT, FLOOR AND MATTING, PILE SURFACE, ENTRANCE WAY TYPE |
| MIL-C-81395 Revision A:1981 | CLOTH COATED, DUCK, NYLON |
| MIL-F-50070 Revision C:1964 | |
| MIL-C-43006 Revision G:1989 | CLOTH & STRIP, LAMINATED OR COATED, VINYL NYLON OR POLYESTER HIGH STRENGTH, FLEXIBLE. |
| MIL-C-11390 Revision C:1966 | CLOTH, LAMINATED: COTTON, BALLOON, 3 PLY AIR RETAINING, CHLORPRENE |
| GG-S-618 Revision D:1978 | SPHYGMOMANOMETER, ANEROID AND MERCURIAL |
| MIL-G-17594 Revision B:1963 | GROMMET, PLASTIC, UNICELLULAR, HIGH DENSITY |
| MIL-I-47199 Revision A:1980 | INSULATING COMPOUND, ELECTRICAL, LOW VISCOSITY, SILICONE RUBBER |
| MIL-H-28692 Base Document:1993 | HOSE, NONMETALLIC, POTABLE WATER DISCHARGE, SMOOTH-BORE, LIGHTWEIGHT, 4-INCH WITH REATTACHABLE COUPLINGS |
| MIL-S-87238 Base Document:1985 | SURVIVAL AND FLOTATION SYSTEM, AIRBORNE |
| MIL-B-21408 Revision G:1984 | BOOTS, SAFETY |
| MIL H 13444 : E | HOSE & HOSE ASSEMBLIES, RUBBER: FUEL AND OIL |
| MIL R 15624 : F | RUBBER GASKET MATERIAL, 50 DUROMETER HARDNESS (MAXIMUM) |
| HH-P-151 Revision F:1985 | PACKING; RUBBER-SHEET, CLOTH-INSERT |
| MIL-J-16128 Revision C:1972 | JAR, BATTERY, LAMINATED RUBBER, SUBMARINE |
| MIL-R-83309 Base Document:1971 | REPAIR MATERIAL, NITRILE, FUEL, BLADDER, AIRCRAFT |
| MIL-B-48056 Base Document:1972 | BARRIER MATERIAL, FLEXIBLE, WATERVAPORPROOF, PUNCTURE-RESISTANT, HEAT SEALABLE FOR PACKAGING AMMUNITION |
| MIL-E-15330 Revision D:1977 | EXPANSION JOINT, PIPE, SYNTHETIC RUBBER, FIRE RETARDANT (NAVY) |
| MIL-C-10387 Revision J:1992 | COUPLINGS, CLAMP, PIPE; WITH BOLTS AND SYNTHETIC-RUBBER GASKETS FOR GROOVED-END PIPE |
| TT S 001543 : A | SEALING COMPOUND, SILICONE RUBBER BASE (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
| MIL-I-21070 Revision B:1965 | INSULATING SHEET AND TAPE, ELECTRICAL, REINFORCED MICA PAPER |
| MIL-C-43086 Revision C:1983 | CLOTH,COATED,NYLON,VINYL COATED (FOR AIR SUPPORTED SHELTERS) |
| HH-P-31 Revision F:1987 | PACKING AND LAGGING MATERIALS, FIBROUS GLASS METALLIC AND PLAIN CLOTH AND TAPE |
| MIL-C-14366 Revision E:1986 | CLOTH, COATED, NYLON TWILL (ONE SIDE COATED) |
| ZZ-G-100 Revision A:1961 | GLOVES, RUBBER, AUTOPSY |
| MIL-T-36974 Revision A:1975 | TUBE, BLOOD COLLECTING, VACUUM, NON STERILE |
| MIL-T-22755 Revision B:1972 | TAPE, REPAIR, MAGNETIC MINESWEEPING CABLE SHEATH |
| MIL P 2693 : C | PACKING MATERIAL, COLD STORAGE DOOR GASKETING, NONWATERTIGHT |
| TT-S-00227 Revision E:1969 | SEALING COMPOUND, ELASTOMERIC TYPE, MULTICOMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
| MIL H 29210 : B | HOSE ASSEMBLY, RUBBER, METAL LINED, WIRE REINFORCED, 250 PSIG, SATURATED STEAM SERVICE |
| MIL-F-50022 Base Document:1959 | FACEBLANK (FOR CD V-805 MASK) |
| MIL-H-28596 Revision B:1981 | HOSE AND HOSE ASSEMBLY, RUBBER, STEAM |
| DIN 65210-1:1987-11 | AEROSPACE; HOSE ASSEMBLIES FOR NOMINAL PRESSURE UP TO 210 BAR; TECHNICAL SPECIFICATION FOR HOSES |
| MIL-P-5315 Revision B:1964 | PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT |
| MIL-STD-1857 Base Document:1976 | GROUNDING, BONDING AND SHIELDING DESIGN PRACTICES |
| MIL-DTL-51400 Revision A:2006 | BAG, WATERPROOF, CHEMICAL-BIOLOGICAL MASK, M1A1 |
| MIL-DTL-51170 Revision G:2005 | Bag, Waterproof, Chemical-Biological Mask, M1 |
| MIL-DTL-17505 Revision G:2014 | Hose and Hose Assembly, Rubber, Oil and Gasoline, Suction and Discharge |
| MIL B 0044426 : 1991 | BOOTS, INTERMEDIATE COLD/WET |
| TT S 00230 : C | SEALING COMPOUND, ELASTOMERIC TYPE SINGLE COMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
| MIL B 29361 : 0 | BATTERY, STORAGE, SILVER ZINC, VENTED, GENERAL SPECIFICATION FOR |
| HH-G-76 Revision C:1970 | GASKET, ASBESTOS METALLIC CLOTH |
| MIL-B-55118 Revision A:1971 | BATTERIES, STORAGE, (CELLS) VENTED, NICKEL CADMIUM |
| CCC-P-91 Revision C:1973 | PADDING; RUBBERIZED, CURLED HAIR |
| MIL C 882 : E | CLOTH, DUCK, COTTON OR COTTON POLYESTER BLEND, SYNTHETIC RUBBER,IMPREGNATED, LAMINATED, OIL RESISTANT |
| MIL-F-0010135 Revision C:1968 | FACEBLANK, FIELD PROTECTIVE MASK |
| MIL C 22804 : 0 | CEMENT, SEALING, DOUBLE PLANKING REVIEWER: IS |
| MIL C 40039 : D | CLOTH, COATED, NYLON,VINYL COATED |
| ZZ-P-75 Revision B:1971 | PAD, TYPEWRITER, SPONGE RUBBER |
| MIL-C-11097 Revision B:1961 | CABLE, TELEPHONE (W-50-A) |
| MIL-P-19152 Revision A:1974 | PACKINGS, HYDRAULIC, HIGH PRESSURE(FOR HYDROPNEUMATIC SYSTEMS) |
| MIL-DTL-442 Revision G:2012 | CABLE, (WIRE), TWO CONDUCTOR, PARALLEL |
| TT S 227 : B NOTICE 1 | SEALING COMPOUND, RUBBER BASE, TWO COMPONENT (FOR CALKING, SEALING, & GLAZING IN BUILDING CONSTRUCTION) |
| MIL C 82624 : A | CELL, STORAGE, NICKEL-CADMIUM (FOR TALOS MISSILE) |
| MIL C 43415 : C | CAP, SERVICE, MILITARY POLICE, WHITE |
| MIL-C-43656 Revision A:1982 | CLOTH, COATED, POLYESTER, SILICONE RUBBER |
| MIL M 17191 : D | MOUNT, RESILIENT, PORTSMOUTH BONDED SPOOL TYPE |
| ZZ-G-401 Revision B:1970 | GLOVES, RUBBER (FOR) ELECTRICAL WORKERS (FOR USE IN CONNECTION WITH APPARATUS OR CIRCUITS NOT EXCEEDING 5,000 VOLTS TO GROUND) |
| MIL-A-7021 Revision C:1974 | ASBESTOS SHEET, COMPRESSED, FOR FUEL, LUBRICANT, COOLANT, WATER AND HIGH TEMPERATURE RESISTANT GASKETS |
| MIL-C-52933 Base Document:1977 | CAMOUFLAGE SCREENING SYSTEMS, MODULAR LIGHTWEIGHT, SYNTHETIC SNOW |
| ZZ-T-351 Revision C:1976 | TIP, CANE AND CRUTCH, RUBBER |
| MIL-D-10132 Revision C:1964 | DISC, VALVE |
| MIL-M-81385 Revision A:1967 | Manifold Stem Assemblies, Life Preserver |
| MIL-C-21067 Revision C:1992 | COATING COMPOUND, SYNTHETIC RUBBER, FOR EXPOSED STEEL SURFACES |
| MIL-C-44304 Revision A:1993 | CLOTH, COATED AND LAMINATED, CHEMICAL PROTECTIVE |
| MIL-C-10797 Revision D:1981 | CLOTH, GLASS, SILICONE, RUBBER COATED |
| MIL-L-5567 Revision F:1983 | LIFE RAFTS, INFLATABLE 4 AND 7 MAN FOR AIRCRAFT USE |
| MIL DTL 17 : J | CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR |
| MIL-DTL-20078 Revision D:2004 | Gasket, for Ballistic Doors and Hatches |
| MIL-H-7938 Revision A:1983 | HOSE, RUBBER, FLAME-RESISTANT |
| MIL-L-15581 Revision K:1986 | LIFE PRESERVERS, CO[2] INFLATABLE, POUCH TYPE |
| MIL-B-82623 Base Document:1973 | BATTERY, STORAGE, NICKEL CADMIUM (FOR TALOS MISSILE) |
| ZZ-H-428 Revision D:1974 | HOSE, NON METALLIC AND HOSE, PREFORMED, FOR THE COOLANT SYSTEMS OF AUTOMOTIVE AND OTHER LIQUID COOLED ENGINE |
| MIL-S-2869 Revision B:1986 | SEALING COMPOUND, SYNTHETIC RUBBER, HOSE COVER REPAIR |
| MIL-C-83398 Base Document:1972 | CLOTH, COATED, STRETCH, POLYCHLOROPRENE, KNITTED NYLON |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.