I.S. EN 1010-5:2005
Current
The latest, up-to-date edition.
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD
Hardcopy , PDF
English
01-01-2005
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
5.1 General
5.2 Machines for the production of corrugated board
5.2.1 Entire machines
5.2.2 Unwinding stations
5.2.3 Splicers
5.2.4 Preheater
5.2.5 Single facer
5.2.6 Inclined belt conveyor
5.2.7 Bridge
5.2.8 Braking and web aligning section
5.2.9 Glue machine
5.2.10 Heating and pulling section
5.2.11 Rotary shears
5.2.12 Pulling unit
5.2.13 Slitter-scorer units
5.2.14 Web diverter
5.2.15 Sheeters
5.2.16 Stacker devices
5.3 Folding box gluer machines
5.3.1 Feeder
5.3.2 Folding section
5.3.3 Gluing section
5.3.4 Folding belt
5.3.5 Pressing section
5.3.6 Entire machine
5.4 Inline machines
5.4.1 Entire machine
5.4.2 Feeding unit
5.4.3 Printing unit
5.4.4 Slitter-scorer unit, rotary die cutter
5.4.5 Folding unit (folding box gluer)
5.4.6 Stitching unit
5.4.7 Delivery
5.5 Hand-fed platen machines for cutting and creasing
5.6 Automatic flatbed punching machines
5.6.1 Feeder
5.6.2 Punching section
5.6.3 Breaking section
5.6.4 Blank separating section, blank delivery
5.6.5 Trimming and delivery of gripper edge
5.6.6 Entire machine
5.7 Tube winding machines
6 Verification of safety requirements and/or measures
7 Information for use
7.1 Instruction handbook
7.1.1 Corrugated board machine
7.1.2 Folding box gluer machines
7.1.3 Inline machines
7.1.4 Hand-fed platen machines
7.1.5 Automatic flatbed punching machines
7.1.6 Tube winding machine
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements
of EU Directive 98/37/EC
Bibliography
Applicable to machines for the production of corrugated board and the conversion of flat and corrugated board.
| DocumentType |
Standard
|
| Pages |
62
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| SupersededBy |
| Standards | Relationship |
| EN 1010-5:2005 | Identical |
| EN 418 : 1992 | SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 619:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
| EN 1010-1:2004+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 13023:2003+A1:2010 | Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.