I.S. EN 12063:1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
EXECUTION OF SPECIAL GEOTECHNICAL WORK - SHEET-PILE WALLS
Hardcopy , PDF
30-05-2024
English
01-01-1999
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Definitions
4 Information needed for the execution of sheet pile walls
4.1 General
4.2 Specific
5 Site investigations
5.1 Soils and rock investigation
5.2 Driveability of sheet piles
6 Materials and products
6.1 Steel sheet piles
6.2 Timber sheet piles
6.3 Other materials and products
6.4 Corrosion protection for steel sheet piles and
preservation of wooden sheet piles
6.5 Sealings for interlocks
7 Design considerations
7.1 General
7.2 Selection of sheet pile
7.3 Other structural elements
7.4 Sequence of execution
7.5 Specific design considerations
8 Execution of sheet pile wall structures
8.1 General
8.2 Site preparation
8.3 Storage and handling of the sheet piles
8.4 Welding and cutting of steel elements
8.5 Driving of the sheet piles
8.6 Tolerances regarding plan position and verticality
8.7 Corrections of sheet pile position during driving
8.8 Installation of anchorages
8.9 Walings and struts
8.10 Excavation, filling, drainage and de-watering
8.11 Extraction of sheet piles
8.12 Rock dowels and anchor bolts
8.13 Sealing
9 Supervision, Testing and Monitoring
9.1 Supervision
9.2 Testing
9.3 Monitoring
10 Site Records
10.1 Records in connection with the execution
10.2 Records at completion of the execution works
11 Special Requirements
11.1 Safety
11.2 Impact on the surrounding buildings and installations
11.3 Noise hindrance
11.4 Permeability of sheet pile walls
Annex A (informative) Handling and storage of sheet piles
Annex B (informative) Welding of sheet piles
Annex C (informative) Driving of sheet piles
Annex D (informative) Installation and driving assistance
Annex E (informative) Watertightness of interlock sealings
Annex F (informative) Timber sheet piles and walings
Annex G (informative) Bibliography
Describes requirements, recommendations and information concerning the execution of permanent or temporary sheet pile wall structures in accordance with 2.4 of ENV 1991-1:1994 and the handling of equipment and materials.
| DocumentType |
Standard
|
| Pages |
80
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NF EN 12063 : 1999 | Identical |
| NS EN 12063 : 1ED 1999 | Identical |
| BS EN 12063:1999 | Identical |
| UNI EN 12063 : 2002 | Identical |
| EN 12063:1999 | Identical |
| UNE-EN 12063:2000 | Identical |
| NEN EN 12063 : 1999 | Identical |
| NBN EN 12063 : 1999 | Identical |
| SN EN 12063 : 1999 | Identical |
| ONORM EN 12063 : 1999 | Identical |
| DIN EN 12063:1999-05 | Identical |
| ENV 1997-1 : 1994 | EUROCODE 7: GEOTECHNICAL DESIGN - GENERAL RULES |
| ISO 9692:1992 | Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding Joint preparations for steel |
| EN 335-2:2006 | Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
| EN 29692 : 1994 | METAL-ARC WELDING WITH COVERED ELECTRODE, GAS-SHIELDED METAL-ARC WELDING AND GAS WELDING - JOINT PREPARATIONS FOR STEEL |
| EN 440 : 1994 | WELDING CONSUMABLES - WIRE ELECTRODES AND DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| EN 10079:2007 | Definition of steel products |
| EN 288-3:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS |
| EN 756:2004 | Welding consumables - Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification |
| EN 10248-2:1995 | Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
| ENV 1991-1 : DRAFT 1994 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - BASIS OF DESIGN |
| EN 996:1995+A3:2009 | Piling equipment - Safety requirements |
| EN 10248-1:1995 | Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions |
| EN 844-7:1997 | Round and sawn timber - Terminology - Part 7: Terms relating to anatomical structure of timber |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| EN 288-2:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING |
| EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 844-3:1995 | Round and sawn timber - Terminology - Part 3: General terms relating to sawn timber |
| ISO 1106-1:1984 | Recommended practice for radiographic examination of fusion welded joints — Part 1: Fusion welded butt joints in steel plates up to 50 mm thick |
| EN 844-1:1995 | Round and sawn timber - Terminology - Part 1: General terms common to round timber and sawn timber |
| ENV 1993-5 : 1998 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 5: PILING |
| EN 499 : 1994 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 24063 : 1992 | WELDING, BRAZING, SOLDERING AND BRAZE WELDING OF METALS - NOMENCLATURE OF PROCESSES AND REFERENCE NUMBERS FOR SYMBOLIC REPRESENTATION ON DRAWINGS |
| EN 10219-2:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties |
| EN 335-1:2006 | Durability of wood and wood- based products - Definition of use classes - Part 1: General |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| ENV 1992-1-1 : DRAFT 91 COR 1992 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - GENERAL RULES AND RULES FOR BUILDINGS |
| EN 10249-1:1995 | Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions |
| EN 844-9:1997 | Round and sawn timber - Terminology - Part 9: Terms relating to features of sawn timber |
| ENV 1993-1-1:1992/A2:1998 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - GENERAL RULES AND RULES FOR BUILDINGS |
| EN 25817 : 1992 | ARC WELDED JOINTS IN STEEL - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN 10249-2:1995 | Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.