I.S. EN 12312-15:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 15: BAGGAGE AND EQUIPMENT TRACTORS
Hardcopy , PDF
English
01-01-2006
25-04-2020
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
5.1 General requirements
5.2 Driver's accommodation
5.3 Driver's cabin
5.4 Seats
5.5 Controls, monitoring devices and displays
5.6 Additional operating positions
5.7 Chassis and body
5.8 Electrical equipment
6 Information for use
6.1 Marking
6.2 Additional marking
6.3 Instructions
7 Verification of requirements
Annex A (informative) Examples of typical baggage and
equipment tractors
Annex B (normative) List of hazards in addition to those
of EN 1915-1
Annex C (normative) Minimum space envelope for seated
operator enclosure
Annex D (informative) Examples of couplings
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements
of EU Directive Machinery Directive
98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements
of EU Directive 2006/42/EC
Bibliography
Applicable to self-propelled baggage and equipment tractors with driver accommodation.
| DevelopmentNote |
2006 Edition Re-issued in August 2009 & incorporates AMD 1 2009. (08/2009)
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NF EN 12312-15 : 2006 + A1 2010 | Identical |
| NBN EN 12312-15 : 2006 + A1 2009 | Identical |
| NEN EN 12312-15 : 2006 + A1 2009 | Identical |
| NS EN 12312-15 : 2006 + A1 2009 | Identical |
| BS EN 12312-15 : 2006 | Identical |
| EN 12312-15:2006+A1:2009 | Identical |
| DIN EN 12312-15:2009-08 | Identical |
| ONORM EN 12312-15 : 2009 | Identical |
| DIN EN 12312-15:2006-03 | Equivalent |
| EN 12312-15:2006 | Equivalent |
| EN ISO 2860:2008 | Earth-moving machinery - Minimum access dimensions (ISO 2860:1992) |
| CEN Guide 414:2017 | Safety of machinery - Rules for the drafting and presentation of safety standards |
| EN 1915-3:2004+A1:2009 | Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction |
| EN 811 : 1996 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| EN 1175-1:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks |
| EN 1175-3:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 1915-4:2004+A1:2009 | Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction |
| EN 1175-2:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks |
| ISO 2860:1992 | Earth-moving machinery — Minimum access dimensions |
| ISO 21281:2005 | Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks — Rules for the construction and layout of pedals |
| EN 1915-2:2001+A1:2009 | Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods |
| ISO 12100-2:2003 | Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles |
| EN ISO 21281:2005 | Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks - Rules for the construction and layout of pedals (ISO 21281:2005) |
| ISO 10254:1995 | Air cargo and ground equipment — Vocabulary |
| ISO 12100-1:2003 | Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology |
| ISO 13850:2015 | Safety of machinery — Emergency stop function — Principles for design |
| EN 1915-1:2013 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
| EN ISO 2867:2011 | Earth-moving machinery - Access systems (ISO 2867:2011) |
| ISO 2867:2011 | Earth-moving machinery — Access systems |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.