I.S. EN 12566-6:2016
Current
The latest, up-to-date edition.
SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 6: PREFABRICATED TREATMENT UNITS FOR SEPTIC TANK EFFLUENT
Hardcopy , PDF
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
National Foreword
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units and
abbreviated terms
4 Products characteristics
5 Testing, assessing and sampling methods
6 Assessment and verification of constancy of
performance (AVCP)
7 Classification and designation (Nominal
designation)
8 Marking, labelling and packaging
Annex A (normative) - Secondary treatment
efficiency test procedure
Annex B (normative) - Presentation of the
microorganisms test results
Annex C (informative) - Analysis method
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the
EU Construction Products Regulation
Bibliography
Defines requirements, test methods, evaluation of conformity and marking for prefabricated secondary treatment units used for the treatment of effluent from septic tanks according to EN 12566-1 or EN 12566-4 in small wastewater treatment systems for up to 50 PT.
DocumentType |
Standard
|
Pages |
56
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Supersedes |
Standards | Relationship |
EN 12566-6:2016 | Identical |
S.R. 66:2015 | STANDARD RECOMMENDATION PROVIDING GUIDANCE TO WASTEWATER TREATMENT PRODUCTS IN COMPLIANCE WITH THE EN 12566 SERIES OF STANDARDS |
ISO 5664:1984 | Water quality — Determination of ammonium — Distillation and titration method |
EN 12566-1:2016 | Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks |
ISO 6778:1984 | Water quality — Determination of ammonium — Potentiometric method |
ISO 5663:1984 | Water quality — Determination of Kjeldahl nitrogen — Method after mineralization with selenium |
EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
ISO 5815:1989 | Water quality Determination of biochemical oxygen demand after 5 days (BOD 5) Dilution and seeding method |
EN 1899-1:1998 | Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition (ISO 5815:1989, modified) |
EN 872:2005 | Water quality - Determination of suspended solids - Method by filtration through glass fibre filters |
EN ISO 11732:2005 | Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005) |
EN 25663:1993 | Water quality - Determination of Kjeldahl nitrogen - Method after mineralization with selenium (ISO 5663:1984) |
ISO 11732:2005 | Water quality — Determination of ammonium nitrogen — Method by flow analysis (CFA and FIA) and spectrometric detection |
EN 12566-4:2016 | Small wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits |
EN ISO 11905-1:1998 | Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate (ISO 11905-1:1997) |
ISO 11905-1:1997 | Water quality — Determination of nitrogen — Part 1: Method using oxidative digestion with peroxodisulfate |
EN 16323:2014 | Glossary of wastewater engineering terms |
ISO 6060:1989 | Water quality — Determination of the chemical oxygen demand |
EN ISO 7899-2:2000 | Water quality - Detection and enumeration of intestinal enterococci - Part 2: Membrane filtration method (ISO 7899-2:2000) |
ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
EN 12260:2003 | Water quality - Determination of nitrogen - Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides |
ISO 15681-2:2003 | Water quality Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Part 2: Method by continuous flow analysis (CFA) |
ISO 10304-1:2007 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
EN ISO 15681-2:2004 | Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 2: Method by continuous flow analysis (CFA) (ISO 15681-2:2003) |
EN 476:2011 | General requirements for components used in drains and sewers |
ISO 13395:1996 | Water quality — Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 15705:2002 | Water quality Determination of the chemical oxygen demand index (ST-COD) Small-scale sealed-tube method |
EN 12566-3:2016 | Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants |
ISO 9308-1:2014 | Water quality — Enumeration of Escherichia coli and coliform bacteria — Part 1: Membrane filtration method for waters with low bacterial background flora |
EN ISO 6878:2004 | Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method (ISO 6878:2004) |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 6878:2004 | Water quality — Determination of phosphorus — Ammonium molybdate spectrometric method |
ISO 7899-2:2000 | Water quality Detection and enumeration of intestinal enterococci Part 2: Membrane filtration method |
ISO 7150-1:1984 | Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
EN ISO 14911:1999 | Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water (ISO 14911:1998) |
ISO 14911:1998 | Water quality — Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography — Method for water and waste water |
EN ISO 13395:1996 | Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.