I.S. EN 13120:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
Hardcopy , PDF
English
23-02-2009
20-08-2025
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
National Foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Operating effort
5 Design of the operating mechanism - Diagrams HPV
('human pull value')
6 Misuse
7 Mechanical endurance (repeated operation cycles)
8 Safety in use
9 Hygiene, health and environment
10 Thermal resistance
11 Total solar energy transmittance gtot
12 Appearance
13 Durability
14 Handling and storage
15 Information for installation, use and maintenance
16 Marking
Annex A (informative) - Definition of internal atmospheric
conditions (Interior surroundings)
Annex B (normative) - List of significant 'machine' hazards
Annex C (informative) - Common safety systems for protection
from strangulation
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 2006/42/EC
Bibliography
Describes the requirements which internal blinds shall fulfil when fitted to a building.
| DevelopmentNote |
Supersedes I.S. 386 & I.S. 387. 2009 Edition Re-Issued in August 2014 & incorporates AMD 1 2014 & National Foreword. (08/2014)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN 13120:2014-09 | Identical |
| BS EN 13120 : 2009 | Identical |
| NBN EN 13120 : 2009 COR 2015 | Identical |
| NF EN 13120 : 2009 + A1 2014 | Identical |
| NS EN 13120 : 2009 AC 2015 | Identical |
| NEN EN 13120 : 2009 C1 2015 | Identical |
| DIN EN 13120:2009-04 | Equivalent |
| EN 13120:2009 | Equivalent |
| UNE-EN 13120:2010 | Identical |
| I.S. 387:2012 | INTERNAL CORDED WINDOW PRODUCTS - SAFETY REQUIREMENTS |
| I.S. 386:2012 | SAFETY OF CORDED WINDOW PRODUCTS - GUIDANCE FOR PROCUREMENT, MEASURING, MANUFACTURE, INSTALLATION AND RETROFITTING |
| BS 7231-1:1990 | Body measurements of boys and girls from birth up to 16.9 years Information in the form of tables |
| ISO 7724-1:1984 | Paints and varnishes — Colorimetry — Part 1: Principles |
| EN 16434:2014 | Internal blinds - Protection from strangulation hazards - Requirements and test methods for safety devices |
| EN ISO 1421:2016 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016) |
| EN 14202:2004 | Blinds and shutters - Suitability for use of tubular and square motorizations - Requirements and test methods |
| EN ISO 105-B04:1997 | Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (ISO 105-B04:1994) |
| EN 14201:2004 | Blinds and shutters - Resistance to repeated operations (mechanical endurance) - Methods of testing |
| EN 13772:2011 | Textiles and textile products - Burning behaviour - Curtains and drapes - Measurement of flame spread of vertically oriented specimens with large ignition source |
| CEN/TR 13387:2004 | Child use and care articles - Safety guidelines |
| EN 14203:2004 | Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods |
| EN 14500:2008 | Blinds and shutters - Thermal and visual comfort - Test and calculation methods |
| ISO 7724-2:1984 | Paints and varnishes — Colorimetry — Part 2: Colour measurement |
| ISO 105-B04:1994 | Textiles — Tests for colour fastness — Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| EN 12194:2000 | Shutters, external and internal blinds - Misuse - Test methods |
| ISO 7724-3:1984 | Paints and varnishes — Colorimetry — Part 3: Calculation of colour differences |
| EN 13527:1999 | Shutters and blinds - Measurement of operating force - Test methods |
| IEC 60335-2-97:2016 | Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for shutters, awnings, blinds and similar equipment |
| EN 13125:2001 | Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product |
| EN 14501:2005 | Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| EN 12280-2:2002 | Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: effect of light or weathering |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN 20105-A02:1994 | Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993) |
| EN 60335-2-97:2006/A12:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-97: PARTICULAR REQUIREMENTS FOR DRIVES FOR ROLLING SHUTTERS, AWNINGS, BLINDS AND SIMILAR EQUIPMENT |
| ISO 105-A02:1993 | Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour |
| ISO 10077-1:2017 | Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 1: General |
| EN 16433:2014 | Internal blinds - Protection from strangulation hazards - Test methods |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN 12045:2000 | Shutters and blinds power operated - Safety in use - Measurement of the transmitted force |
| EN 1070 : 1998 | SAFETY OF MACHINERY - TERMINOLOGY |
| EN ISO 10077-1:2017 | Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017, Corrected version 2020-02) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.