I.S. EN 14035-7:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS
Hardcopy , PDF
04-10-2010
I.S. EN 15947-4:2010
I.S. EN 15947-3:2010
I.S. EN 15947-5:2010
English
01-01-2004
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 Normative references
3 Terms and definitions
4 Construction
4.1 Means of ignition
4.2 Attachment of friction head
4.3 Resistance to ignition by an abrasive surface
4.4 Protection of Bengal match
4.5 Material of stick
4.6 Integrity of stick
4.7 Net explosive content
4.8 Length of uncoated end of wooden stick (handle)
4.9 Striking surface
5 Performance
5.1 Friction head
5.2 Principal effects
5.3 Burning matter
5.4 Burning of pyrotechnic composition
5.5 Burning rate of pyrotechnic composition
6 Primary pack
7 Minimum labelling requirements
7.1 General
7.2 Type name and category
7.3 Safety information
7.3.1 General
7.3.2 Bengal matches
7.4 Name, address and telephone number of manufacturer
or distributor or importer
7.5 Reference to this standard
7.6 Printing
7.6.1 Labelling
7.6.2 Type size
7.7 Additional information on the primary pack
8 Test methods
8.1 Attachment of friction head (type test)
8.1.1 Apparatus
8.1.2 Procedure
8.2 Resistance to ignition by an abrasive surface (type
test and batch test)
8.2.1 Apparatus
8.2.2 Procedure
8.3 Length of uncoated end of wooden stick (type test
and batch test)
8.3.1 Apparatus
8.3.2 Procedure
8.4 Performance (type test and batch test)
8.4.1 Test environment
8.4.2 Material
8.4.3 Apparatus
8.4.4 Procedure
8.5 Determination of net explosive content (type test)
8.5.1 Material
8.5.2 Apparatus
8.5.3 Procedure
8.6 Labelling (type test and batch test)
Annex A (normative) Type testing
A.1 General
A.2 Number of Bengal matches to be tested
A.3 Loose pyrotechnic composition
A.4 Thermal conditioning
A.5 Mechanical conditioning
A.5.1 Apparatus
A.5.2 Procedure
A.6 Number of primary packs to be examined
A.7 Test report
Annex B (normative) Batch testing
B.1 General
B.2 Sampling plans
B.3 Unit of product
B.4 Nonconformities
B.5 Test report
B.6 Acceptance or rejection of a batch
B.6.1 General
B.6.2 Nonconforming units
B.6.3 Critical nonconforming units
B.6.4 Major nonconforming units
B.6.5 Minor nonconforming units
Annex C (normative) Specification for test paper
C.1 Requirements
C.2 Scorch test
C.2.1 Material
C.2.2 Apparatus
C.2.3 Test specimen
C.2.4 Procedure
Annex D (normative) Method for determination of smouldering
rate of cigarette
Annex E (informative) A-Deviations
Provides requirements for the construction, performance, primary packaging and labelling of Bengal matches and the corresponding test methods.
| DocumentType |
Standard
|
| Pages |
29
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 14035-7:2005 | Identical |
| EN 14035-7:2004 | Identical |
| NF EN 14035-7 : 2005 | Identical |
| BS EN 14035-7:2004 | Identical |
| NEN EN 14035-7 : 2004 | Identical |
| SN EN 14035-7 : 2004 | Identical |
| NBN EN 14035-7 : 2004 | Identical |
| NS EN 14035-7 : 1ED 2004 | Identical |
| UNI EN 14035-7 : 2004 | Identical |
| DIN EN 14035-7:2004-11 | Identical |
| EN ISO 845:2009 | Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006) |
| EN ISO 536:2012 | Paper and board - Determination of grammage (ISO 536:2012) |
| ISO 3599:1976 | Vernier callipers reading to 0,1 and 0,05 mm |
| EN 20187:1993 | Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990) |
| ISO 6344-3:2013 | Coated abrasives Grain size analysis Part 3: Determination of grain size distribution of microgrits P240 to P2500 |
| ISO 21948:2001 | Coated abrasives Plain sheets |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN ISO 2439:2008 | Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.