I.S. EN 14225-2:2017
Current
The latest, up-to-date edition.
DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Marking
7 Information to be supplied by the manufacturer
Annex A (normative) - Ratings of practical performance,
thermal comfort and perceived exertion
Annex B (normative) - Abrasion - Requirements for glass
paper and glass cloth
Annex C (informative) - Significant technical changes
between this European Standard and EN 14225-2:2005
Annex ZA (informative) - Relationship between this
European Standard and the Essential requirements
of Directive 89/686/EEC aimed to be covered
Annex ZB (informative) - Relationship between this
European Standard and the Essential Requirements
of Regulation (EU) 2016/425 aimed to be covered
Bibliography
Defines the construction and performance, of dry suits for wear by divers for underwater activities where the user is breathing underwater.
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS EN 14225-2:2005 | Identical |
| UNE-EN 14225-2:2005 | Identical |
| SN EN 14225-2 : 2005 | Identical |
| UNI EN 14225-2 : 2005 | Identical |
| NBN EN 14225-2 : 2005 | Identical |
| DIN EN 14225-2:2014-03 (Draft) | Identical |
| EN 14225-2:2017 | Identical |
| NF EN 14225-2 : 2005 | Identical |
| ISO 15027-3:2012 | Immersion suits Part 3: Test methods |
| EN 530:2010 | Abrasion resistance of protective clothing material - Test methods |
| EN ISO 13995:2000 | Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000) |
| ISO 13934-2:2014 | Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method |
| EN ISO 10551:2001 | Ergonomics of the thermal environment - Assessment of the influence of the thermal environment using subjective judgement scales (ISO 10551:1995) |
| EN 20811:1992 | Textiles - Determination of resistance to water penetration - Hydrostatic pressure test |
| EN 250:2014 | Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing and marking |
| ISO 13688:2013 | Protective clothing — General requirements |
| ISO 3758:2012 | Textiles — Care labelling code using symbols |
| EN 16523-1:2015 | Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| IMO IF110 : 2014 SUPP 2016 | SOLAS CONSOLIDATED EDITION |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN ISO 13935-2:2014 | Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014) |
| EN ISO 13934-2:2014 | Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014) |
| ISO 4046-3:2002 | Paper, board, pulps and related terms Vocabulary Part 3: Paper-making terminology |
| ISO 811:1981 | Textile fabrics Determination of resistance to water penetration Hydrostatic pressure test |
| EN ISO 15027-3 : 2012 COR 2012 | IMMERSION SUITS - PART 3: TEST METHODS (ISO 15027-3:2012) |
| EN ISO 13688:2013 | Protective clothing - General requirements (ISO 13688:2013) |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 10551:1995 | Ergonomics of the thermal environment Assessment of the influence of the thermal environment using subjective judgement scales |
| EN 1809:2014+A1:2016 | Diving equipment - Buoyancy compensators - Functional and safety requirements, test methods |
| EN ISO 3758:2012 | Textiles - Care labelling code using symbols (ISO 3758:2012) |
| ISO 13995:2000 | Protective clothing — Mechanical properties — Test method for the determination of the resistance to puncture and dynamic tearing of materials |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.