I.S. EN 14420-1:2013
Current
The latest, up-to-date edition.
HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING
Hardcopy , PDF
English
01-01-2013
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Types of fixing and connection
6 Ordering designation system
7 Type testing and quality control
8 Mounting of hose fittings
9 Marking
Bibliography
Describes requirements, types of fixing and connection, designation and testing for hose fittings with clamp units for hoses made of rubber/plastics or thermoplastics preferably for use with flammable and non-flammable products.
DocumentType |
Standard
|
Pages |
21
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NEN EN 14420-1 : 2013 | Identical |
EN 14420-1:2013 | Identical |
SN EN 14420-1 : 2013 | Identical |
NF EN 14420-1 : 2013 | Identical |
NS EN 14420-1 : 2013 | Identical |
UNE-EN 14420-1:2005 | Identical |
BS EN 14420-1:2013 | Identical |
UNI EN 14420-1 : 2013 | Identical |
NBN EN 14420-1 : 2013 | Identical |
DIN EN 14420-1:2013-09 | Identical |
EN 854:2015 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
EN 13766:2010 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
EN 856:2015 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
ISO 1825:2010 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling Specification |
ISO 4641:2016 | Rubber hoses and hose assemblies for water suction and discharge — Specification |
EN 14420-7:2013 | Hose fittings with clamp units - Part 7: Cam locking couplings |
EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
EN 14420-4:2013 | Hose fittings with clamp units - Part 4: Flange connections |
EN 13482:2013 | Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
EN 14420-5:2013 | Hose fittings with clamp units - Part 5: Threaded connections |
EN ISO 7326:2016 | Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016) |
EN 857:2015 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
ISO 7326:2016 | Rubber and plastics hoses Assessment of ozone resistance under static conditions |
EN ISO 8033:2017 | Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
EN 14420-2:2013 | Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
EN 13765:2010+A1:2015 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
EN ISO 6802:2008 | Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO 6802:2005) |
ISO 6802:2005 | Rubber and plastics hoses and hose assemblies with wire reinforcements Hydraulic impulse test with flexing |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
EN 14420-8:2013+A1:2016 | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
EN ISO 8029:2014 | Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
EN 1765:2016 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
EN 1761:1999 | Rubber hoses and hose assemblies for fuel truck delivery - Specification |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 9001:2015 | Quality management systems — Requirements |
EN ISO 4641:2016 | Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016) |
EN 14420-3:2013 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
EN 14420-6:2013 | Hose fittings with clamp units - Part 6: TW tank truck couplings |
EN 855:1996 | Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification |
EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
EN 853:2015 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
EN 1762:2017 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
ISO 8029:2014 | Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification |
ISO 8033:2016 | Rubber and plastics hoses Determination of adhesion between components |
EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.