I.S. EN 14594:2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING
Hardcopy , PDF
17-06-2018
English
01-01-2005
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National foreword
European foreword
1 Scope
2 Normative references
3 Terms, description and symbols
4 Classification
5 Requirements
6 Testing
7 Marking
8 Information supplied by the manufacturer
Annex ZA (informative) - Relationship between
this European Standard and the essential
health and safety requirements of Regulation
2016/425/EU [2016 OJ L81] aimed to be covered
Bibliography
Provides minimum requirements for continuous flow compressed air line breathing apparatus for use with a full face mask, half mask, or incorporating a hood, helmet or suit, and apparatus used in abrasive blasting operations, as a respiratory protective device.
| DevelopmentNote |
Together with I.S. EN 14593-1 and I.S. EN 14593-2 supersedes I.S. EN 139. Supersedes I.S. EN 270, I.S. EN 271, I.S. EN 1835 and I.S. EN 12419. (07/2005)
|
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| BS EN 14594:2005 | Identical |
| NS EN 14594 : 1ED 2005 | Identical |
| SN EN 14594 : 2005 | Identical |
| DIN EN 14594:2005-07 | Identical |
| NBN EN 14594 : 2005 COR 2005 | Identical |
| NF EN 14594 : 2005 | Identical |
| UNI EN 14594 : 2005 | Identical |
| ONORM EN 14594 : 2005 | Identical |
| UNE-EN 14594:2005 | Identical |
| EN 14594:2018 | Identical |
| EN 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| EN 60079-32-2:2015 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
| EN 175:1997 | Personal protection - Equipment for eye and face protection during welding and allied processes |
| EN 379:2003+A1:2009 | Personal eye-protection - Automatic welding filters |
| EN 148-3:1999 | Respiratory protective devices - Threads for facepieces - Part 3: Tread connection M 45 x 3 |
| ISO 13934-2:2014 | Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method |
| EN 12021:2014 | Respiratory equipment - Compressed gases for breathing apparatus |
| EN ISO 7854:1997 | Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing (ISO 7854:1995) |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| EN ISO 8031:2009 | Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009) |
| ISO 14877:2002 | Protective clothing for abrasive blasting operations using granular abrasives |
| EN 132:1998 | Respiratory protective devices - Definitions of terms and pictograms |
| EN 13274-3:2001 | Respiratory protective devices - Methods of test - Part 3: Determination of breathing resistance |
| EN 134:1998 | Respiratory protective devices - Nomenclature of components |
| EN 13274-4:2001 | Respiratory protective devices - Methods of test - Part 4: Flame tests |
| EN 13274-6:2001 | Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air |
| EN ISO 13934-2:2014 | Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014) |
| ISO 16900-14:2015 | Respiratory protective devices Methods of test and test equipment Part 14: Measurement of sound level |
| ISO 7854:1995 | Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing |
| EN 13274-1:2001 | Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage |
| EN 166:2001 | Personal eye-protection - Specifications |
| EN 169:2002 | Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use |
| EN 171:2002 | Personal eye-protection - Infrared filters - Transmittance requirements and recommended use |
| EN ISO 13688:2013 | Protective clothing - General requirements (ISO 13688:2013) |
| EN 170:2002 | Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use |
| EN 148-2:1999 | Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection |
| ISO 13301:2002 | Sensory analysis Methodology General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure |
| EN 13274-2:2001 | Respiratory protective devices - Methods of test - Part 2: Practical performance tests |
| EN ISO 14877:2002 | Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002) |
| ISO 8031:2009 | Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity |
| EN 397:2012+A1:2012 | Industrial safety helmets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.