I.S. EN 15283-2:2008
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS
Hardcopy , PDF
15-09-2009
English
25-04-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 Mechanical characteristics
4.2 Fire behaviour
4.3 Acoustic properties
4.4 Water vapour permeability/water vapour resistance
(expressed as water vapour resistance factor) question
for the mandate
4.5 Thermal resistance (expressed as thermal conductivity)
4.6 Dangerous substances
4.7 Dimensions and tolerances
4.8 Additional requirements for gypsum fibre boards with
reduced surface water absorption types GF-W1 and GF-W2
4.9 Additional requirements for gypsum fibre boards with
reduced water absorption rate
4.10 Additional requirements for gypsum fibre boards with
enhanced density type GF-D
4.11 Additional requirements for gypsum fibre boards with
enhanced surface hardness type GF-I
4.12 Impact resistance
5 Test methods
5.1 Sampling
5.2 Determination of width
5.3 Determination of length
5.4 Determination of thickness
5.5 Determination of squareness
5.6 Determination of flexural strength (bending strength)
5.7 Determination of deflection under load
5.8 Determination of surface water absorption
5.9 Determination of total water absorption
5.10 Determination of density
5.11 Determination of surface hardness of the board
5.12 Determination of shear strength (strength of
board/substructure connection)
6 Evaluation of conformity
6.1 General
6.2 Initial type testing
6.3 Factory production control
7 Designation of gypsum fibre boards
8 Marking, labelling and packaging
Annex A (informative) Sampling procedure for testing
A.1 General
A.2 Sampling procedure
Annex B (normative) Mounting and fixing for testing according
to EN 13823 (SBI)
Annex ZA (informative) Clauses of this European Standard addressing
the provisions of EU Construction Products
Directive
ZA.1 Scope and relevant characteristics
ZA.2 Procedure of attestation of conformity of gypsum fibre
boards
ZA.3 CE marking and labelling
Bibliography
Defines the characteristics and performance of gypsum fibre boards intended to be used in building construction works including those intended for secondary manufacturing operations.
| DevelopmentNote |
2008 Edition Re-issued in September 2009 & incorporates AMD 1 2009. (09/2009)
|
| DocumentType |
Standard
|
| Pages |
43
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Standards | Relationship |
| BS EN 15283-2 : 2008 | Identical |
| NF EN 15283-2 : 2008 + A1 2009 | Identical |
| DIN EN 15283-2:2009-12 | Identical |
| EN 15283-2:2008+A1:2009 | Identical |
| NEN EN 15283-2 : 2008 + A1 2009 | Identical |
| I.S. 440:2009 | TIMBER FRAME DWELLINGS |
| EN 520:2004+A1:2009 | Gypsum plasterboards - Definitions, requirements and test methods |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| ISO 140-3:1995 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements |
| EN 20535:1994 | Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:1991) |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 12524 : 2000 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES |
| ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 338:2016 | Structural timber - Strength classes |
| ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
| ISO 7892:1988 | Vertical building elements — Impact resistance tests — Impact bodies and general test procedures |
| ISO 535:2014 | Paper and board — Determination of water absorptiveness — Cobb method |
| EN 13963:2014 | Jointing materials for gypsum boards - Definitions, requirements and test methods |
| EN 14195:2014 | Metal framing components for gypsum board systems - Definitions, requirements and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.